UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

Form 10-K

☑ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the fiscal year ended December 28, 2020

Or

☐TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the transition period from                           to                          

Commission file number 0-31285

TTM TECHNOLOGIES, INC.

(Exact Name of Registrant as Specified in Its Charter)

(714) 327-3000

(Registrant’s telephone number, including area code)

Securities registered pursuant to Section 12(b) of the Exchange Act:

Securities registered pursuant to Section 12(g) of the Exchange Act: None

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act.    Yes ☑      No  ☐

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or 15(d) of the Act.    Yes ☐      No  ☑

Indicate by check mark whether the registrant: (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.    Yes  ☑      No  ☐

Indicate by check mark whether the registrant has submitted electronically every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit such files). Yes  ☑      No  ☐

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, a smaller reporting company, or an emerging growth company. See the definitions of “large accelerated filer,” “accelerated filer”, “smaller reporting company” and “emerging growth company” in Rule 12b-2 of the Exchange Act:

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act.  ☐

Indicate by check mark whether the registrant has filed a report on and attestation to its management’s assessment of the effectiveness of its internal control over financial reporting under Section 404(b) of the Sarbanes-Oxley Act (15 U.S.C. 7262(b)) by the registered public accounting firm that prepared or issued its audit report.  ☑

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Act).    Yes  ☐      No  ☑

The aggregate market value of Common Stock held by non-affiliates of the registrant (based on the closing price of the registrant’s Common Stock as reported on the Nasdaq Global Select Market on June 29, 2020, the last business day of the most recently completed second fiscal quarter), was $1,142,137,689. For purposes of this computation, all officers, directors, and 10% beneficial owners of the registrant are deemed to be affiliates of the registrant. Such determination should not be deemed to be an admission that such officers, directors, or 10% beneficial owners are, in fact, affiliates of the registrant.

As of February 17, 2021, there were outstanding 106,770,572 shares of the registrant’s Common Stock, $0.001 par value.

DOCUMENTS INCORPORATED BY REFERENCE

TTM TECHNOLOGIES, INC.

ANNUAL REPORT ON FORM 10-K

TABLE OF CONTENTS

2

PART I

Statement Regarding Forward-Looking Statements

This report on Form 10-K contains forward-looking statements regarding future events or our future financial and operational performance. Forward-looking statements include statements regarding markets for our products; trends in net sales, gross profits and estimated expense levels; liquidity and anticipated cash needs and availability; and any statement that contains the words “anticipate,” “believe,” “plan,” “forecast,” “foresee,” “estimate,” “project,” “expect,” “seek,” “target,” “intend,” “goal” and other similar expressions. The forward-looking statements included in this report reflect our current expectations and beliefs, and we do not undertake publicly to update or revise these statements, even if experience or future changes make it clear that any projected results expressed in this annual report or future quarterly reports to stockholders, press releases or company statements will not be realized. In addition, the inclusion of any statement in this report does not constitute an admission by us that the events or circumstances described in such statement are material. Furthermore, we wish to caution and advise readers that these statements are based on assumptions that may not materialize and may involve risks and uncertainties, many of which are beyond our control, that could cause actual events or performance to differ materially from those contained or implied in these forward-looking statements. These risks and uncertainties include the business and economic risks described in “Item 1A — Risk Factors”.

Unless otherwise indicated or unless the context requires otherwise, all references to time periods refer to our fiscal year, and all reference to “TTM,” “our company,” “we,” “us,” “our,” and similar names refer to TTM Technologies, Inc. and its subsidiaries.

General

We are a leading global printed circuit board (PCB) manufacturer, focusing on quick-turn and volume production of technologically advanced PCBs and backplane assemblies as well as a global designer and manufacturer of high-frequency radio frequency (RF) and microwave components and assemblies. According to a November 2020 report by Prismark Partners, we are one of the largest PCB manufacturers in the world based on 2019 revenue. Taking into account strategic divestitures the Company carried out in 2020, on a pro-forma basis, we generated approximately $2.0 billion in net sales and ended the year with approximately 16,700 employees worldwide. We currently operate a total of 24 specialized facilities in North America and China. We focus on providing time-to-market and volume production of advanced technology products and offer a one-stop design, engineering and manufacturing solution to our customers. This one-stop design, engineering and manufacturing solution allows us to align technology development with the diverse needs of our customers and to enable them to reduce the time required to develop new products and bring them to market. We currently serve a diversified customer base consisting of approximately 1,600 customers in various markets throughout the world, including aerospace and defense, computing, automotive components, medical, industrial and instrumentation related products, as well as networking/communications infrastructure products. Our customers include both original equipment manufacturers (OEMs) and electronic manufacturing services (EMS) providers.

In April 2020, we had two structural changes to our business: 1) the divesture of our Mobility business unit and 2) the restructuring of our electro-mechanical solutions business (E-M Solutions).

The sale of the Mobility business unit was a strategic divestiture which allows us to focus on longer cycle markets and reduces our exposure to short product cycle and seasonal consumer markets which historically have been prone to greater demand volatility. The Mobility business was also more capital intensive resulting in higher capital spending and lower operating margins as compared to our continuing business. As a result, the remaining TTM business is expected to be less seasonal and less cyclical with more stable financial performance. In addition, the cash proceeds from the sale allowed us to repay $400 million of our Term Loan B, thus reducing our financial leverage and strengthening our balance sheet.

We also restructured our E-M Solutions business unit which involved the closure of our Shenzhen and Shanghai E-M Solutions facilities in the fourth quarter of 2020. The strategic rationale for this action is based on TTM’s increasing focus on designing and manufacturing differentiated, higher margin products such as PCBs and RF components and sub-assemblies. Additionally, local government authorities had communicated to TTM that they intend to expropriate the land where the Shanghai E-M Solutions facility is located.

All of the metrics discussed in this Form 10-K exclude the Mobility business unit, but still include the two E-M Solutions facilities that have ceased operations.

In prior periods, we managed our worldwide operations based on two reportable segments: PCB and E-M Solutions. During the year ended December 28, 2020, our RF and Specialty Components (RF&S Components) operating segment met the quantitative threshold for separate presentation as a reportable segment. The RF&S Components reportable segment was previously aggregated with the PCB reportable segment. As a result, we report our worldwide operations based on three reportable segments: (1) PCB, which consists of fifteen domestic PCB and sub-system plants; five PCB fabrication plants in China; and one in Canada; (2) RF&S Components, which consists of one domestic RF component plant and one RF component plant in China; and (3) E-M Solutions, which consists of three custom electronic assembly plants in China. Each segment operates predominantly in the same industries with

3

facilities that produce customized products for our customers and use similar means of product distribution. Note that following the completion of the restructuring of our E-M Solutions business unit, we will no longer be reporting that operating segment in 2021.

Additional information on our reportable segments and product information is contained in Note 17 of the Notes to Consolidated Financial Statements.

Industry Overview

PCBs are manufactured in panels from sheets of laminated material. Each panel is typically subdivided into multiple PCBs, each consisting of a pattern of electrical circuitry etched from copper to provide an electrical connection between the components mounted to it. PCBs serve as the foundation for virtually all electronic products, including the electronic components integrated into automobiles, high-end commercial electronic equipment (such as medical equipment, data communications routers, switches and servers) and aerospace and defense electronic systems.

Products designed to offer faster data transmission, thinner and more lightweight packaging, and reduced power consumption generally require increasingly complex PCBs to meet these criteria. By using advanced technology PCB product solutions such as High Density Interconnect (HDI) and Substrate-like PCB (SLP) technologies, circuit densities can be increased, thereby providing for smaller products with higher packaging densities. Furthermore, rigid-flex circuits can be found in small and lightweight end products and other space-challenged electronics packaging applications across all end markets. Some PCB manufacturers also manufacture high performance substrates that serve as the interconnect between integrated circuits (ICs) and the PCB’s in many advanced electronic products serving a wide variety of end markets. We collectively refer to all of these technologies as “advanced technologies,” and they generally have growth rates which are higher than conventional technologies. In addition, most of our markets have low volume requirements during the prototype stage that demand a highly flexible manufacturing environment which later transitions to a higher volume requirement during product ramp.

According to estimates in a November 2020 report by Prismark Partners, worldwide demand for PCBs is expected to be $64.0 billion in 2020. Of this worldwide demand for production in 2020, Prismark Partners reports that PCB production in the Americas accounted for approximately 4% (approximately $2.9 billion), PCB production in China accounted for approximately 54% (approximately $34.3 billion), and PCB production in the rest of the world accounted for approximately 42% (approximately $26.8 billion). According to the same report by Prismark Partners, worldwide demand for PCBs is forecast to grow at a 5.1% compound annual growth rate (CAGR) from 2019 to 2024 driven largely by substrate and HDI technologies. Prismark Partners expects mid-single digit growth in 2021, in line with its long term forecast, despite a stronger than expected 2020. The PCB market in 2020 was surprisingly resistant to demand and supply challenges related to the coronavirus (COVID-19) as strength in the defense, cloud/data center, and medical markets offset weakness in the automotive, industrial, and commercial aerospace markets.

Industry Trends

We believe that several trends impacting the PCB manufacturing industry will benefit us in the future. These trends include:

Shorter electronic product life cycles, which create opportunities for PCB manufacturers that can offer engineering support in the prototype stage and manufacturing scalability throughout the production life cycle.

Increasing complexity of electronic products, which requires technologically complex PCBs that can accommodate higher speeds and component densities, including HDI, flexible, and substrate-like PCBs as well as intricately engineered RF components and subsystems.

Higher demand for reliable product manufactured in the U.S., encompassing better oversight on sub-tier supply chain materials and controls. In addition, the trade war between the U.S. and China has increased the importance of supply chain partners with strong domestic capabilities and manufacturing footprint.

Increasing use of PCB technology in diverse end markets as advanced electronics enable new capabilities. Many end markets that TTM serves are seeing a renaissance of growth opportunities due to the implementation of sophisticated electronics. In the defense market, solid-state radar system referred to as active electronic scanned array (AESA) being adopted in key new defense programs, replacing legacy mechanical systems. In the medical end market, remote diagnostic systems and robotics are seeing increasing adoption. In networking/communications, investments in 5G infrastructure and advanced networking are seeing demand for more advanced PCBs, supporting an ever connected world. Finally, in the automotive market an increasing trend toward sophisticated safety systems, automated driving, electric/hybrid vehicles and miniaturization of electronic devices in the automotive industry is driving increasing electronic content and higher PCB usage in automobiles, particularly with regard to the increased demand for advanced technologies like HDI, and RF PCBs for radar.

Supply chain consolidation by commercial OEMs. We believe that PCB manufacturers which can offer one-stop manufacturing capabilities — from prototype to volume production — and integration capabilities have a competitive advantage in the market.

4

Our Strategy

Our goal is to be a leading global provider of time-critical, one-stop manufacturing services for highly complex PCBs, RF components and RF subsystems. Our core strategy includes the following elements:

Provide differentiated capabilities beyond the base PCB by incorporating advanced design-to-specification engineering support, testing, components and specialized assembly into the value-added package provided to customers.   With the acquisition of Anaren in 2018, TTM has moved beyond build-to-print manufacturing and assembly capabilities to engage with customers in designing a more complete RF solution to meet their technology needs. With the additional design capabilities, TTM now provides cost effective, ready for manufacture, enabling technologies to the customer. We continue to build on the Anaren acquisition to deepen our RF engagement with key aerospace and defense customers as well as to carry this same capability to our commercial automotive, telecommunications and networking customers.

Maintain our customer-driven culture and provide superior service to our customers in our core markets of aerospace and defense, automotive, computing and storage, medical/industrial/instrumentation, and networking/communications.    Our customer-oriented culture is designed to achieve extraordinary service, competitive differentiation, and superior execution. Our customer-oriented strategies include engaging in co-development of new products, capturing new technology products for next generation equipment, and continuing investments to enhance our broad offering of PCB and RF/microwave technologies. We believe our ability to anticipate and meet customers’ needs is critical to retaining existing customers and attracting leading companies as new customers.

Drive operational efficiency and productivity.    We are highly focused on improving our operational execution to increase efficiency, productivity and yields. We strongly believe in the benefits of sharing best practices across our extensive manufacturing footprint and rely on stringent goals for throughput, quality and customer satisfaction to measure our effectiveness. The fast paced nature of our business requires a disciplined approach to manufacturing that is rooted in continuous improvement.

Accelerate customer, end-market, and technology diversification through strategic mergers and acquisitions.    We have a history of executing successful acquisitions that have been key to our growth and profitability. We continuously look for strategic opportunities that could facilitate our efforts to further diversify into other growing end markets as well as expand our presence in our existing end markets such as aerospace and defense. We will also look for strategic opportunities that further strengthen our leading edge technology capabilities. For example, the acquisition of Anaren in 2018 added critical RF engineering, simulation and integration capabilities and the acquisition of i3’s assets in 2019 allowed us to broaden our technology portfolio for high mix, low volume advanced technology PCBs.

Accelerate our expansion into the growing markets using our advanced technology as a key point of differentiation.    With rising requirements for faster data transmission, shrinking features (i.e., lightweight and thin), and lower power consumption, many PCB designs have migrated to more complex HDI PCBs from conventional multi-layer PCB technologies. This trend began with PCBs used in portable devices such as smartphones and other mobile devices but has become an increasing trend in other end markets, such as automotive, networking/communications, medical, and aerospace and defense. As our customers consolidate their supply chains, our objective is to differentiate ourselves as a strategic supplier with the technology breadth to meet most, if not all, of our customers’ PCB and RF related requirements.

Address customer needs in all stages of the product life cycle.    By providing a one-stop solution, we work to service our customers’ needs from the earliest stages of product design and development through volume production. We believe that by servicing our customers early in the development process, we are able to demonstrate our capabilities and establish an incumbent position early in the product development cycle, which translates into additional opportunities as our customers move into volume production. We believe our expertise is enhanced by our ability to deliver highly complex PCBs to customers in significantly compressed lead times. This rapid delivery service enables OEMs to develop sophisticated electronic products more quickly and reduce their time to market. We believe we will be able to increase customer engagement with customized RF solutions from the concept stage through volume production, which typically results in intensified customer engagement.

Deliver consistently strong financial performance and execute on our balance sheet strategy.    We aspire to deliver industry-leading financial performance. We expect to achieve this by servicing our customers’ needs in higher-growth end markets in a cost-efficient and effective manner. We believe that this strategy will allow us to generate strong cash flows, which will provide us with the financial flexibility to continue to invest in our business, including through opportunistic acquisitions, and increase value for our shareholders through opportunistic capital structure actions.

Continuously enhance the elements that make TTM an appealing employer.    We aim to attract the right employees to TTM who align with our values and desire growth in their professional careers. Our employee engagement model, emphasis on communications and inclusion, commitment to career development and talent, and collaborative culture are the top reasons employees embrace TTM. Our ability to retain valued talent while attracting candidates is paramount to our continued human capital strategy.

5

Products and Services

We offer a wide range of PCB products, RF components, and backplane/custom assembly solutions, including conventional PCBs, RF and microwave circuits, HDI PCBs, flexible PCBs, rigid-flex PCBs, custom assemblies and system integration, IC substrates, passive RF components, advanced ceramic RF components, hi-reliability multi-chip modules, and beamforming and switching networks. We also offer certain value-added services to support our customers’ needs. These include design-for-manufacturability (DFM), PCB layout design, simulation and testing services, and quick turnaround (QTA) production. For our RF sub-assemblies and components, we provide specialized assembly and RF testing to provide a value-added solution to our customers. By offering this wide range of PCB products, RF components and sub-systems and complementary value-added services, we are able to provide our customers with a “one-stop” manufacturing solution for their PCB and integration requirements. This differentiates us from our competition and enhances our customer relationships.

Conventional PCBs

A conventional PCB is made from a composite laminate that is metalized with a conductive material such as copper. The PCB is the basic platform used to interconnect components in most electronic products including computers, communications equipment, high-end consumer electronics, automotive controls, commercial aerospace and defense systems and medical and industrial equipment. Conventional PCBs can be classified as single-sided, double-sided and multi-layer boards.

We focus on higher layer count conventional PCBs. A multi-layer PCB can accommodate more complex circuitry than a single-sided or double-sided PCB and as such requires more sophisticated production techniques. The number of layers comprising a PCB often increases with the complexity of the end product. For example, a simple consumer device such as a garage door controller may use a single-sided or double-sided PCB, while a high-end network router or computer server may use a PCB with 30 or more layers.

RF and microwave circuits

We produce and test specialized circuits used in radio-frequency or microwave emission and collection applications. These products are typically used for radar, transmit/receive antennas and similar wireless applications. Markets for these products include defense, avionics, satellite, and commercial applications including telecommunications, networking and automotive. The manufacture of these products requires advanced materials, equipment, and methods that are highly specialized and distinct from conventional printed circuit manufacturing techniques. We also offer specialized radio-frequency assembly and test services. We have developed integrated solutions across our facilities and capabilities to provide sophisticated integrated electronics for numerous platforms, ranging from digital RF memory (DRFM) to frequency up/down converters (UDC) and channelized amplifiers for military and space applications.

High density interconnect or HDI PCBs

Our facilities in North America and China also produce high density interconnect (HDI) PCBs, which are PCBs with higher interconnect density per unit area requiring more sophisticated technology and manufacturing processes for their production than conventional PCB products. HDI PCBs are boards with high-density characteristics including micro-sized holes, or microvias (diameter at or less than 0.15 mm), and fine line circuitry (circuit line width and spacing at or less than 0.075 mm) and are fabricated with thin high-performance materials, thereby enabling more interconnection functions per unit area. HDI PCBs generally are manufactured using a sequential build-up process in which circuitry is formed in the PCB one layer at a time through successive drilling, plating and lamination cycles. In general, a board’s complexity is a function of interconnect and circuit density, layer count, laminate material type and surface finishes. As electronic devices have become smaller and more portable with higher functionality, demand for advanced HDI PCB products has increased dramatically. We define advanced HDI PCBs as those having more than one layer of microvia interconnection structure.

Substrate-like PCBs or SLPs

Substrate-like PCBs (SLPs) represent the next evolution of high end HDI PCBs. SLPs are PCBs with even higher interconnect density per unit area than the traditional Advanced HDI PCBs described above requiring an even more sophisticated manufacturing technology adapted from IC substrate fabrication with enhancements to the subtractive and additive techniques of traditional PCBs. This enables fine line circuitry (circuit line width and spacing at or less than 0.03 mm). Demand for this type of high-density circuit is beginning to penetrate the markets of more traditional PCBs. In addition, we now offer an alternative approach to building SLP technology in the United States for lower volume, higher mix commercial and aerospace and defense applications.

Flexible PCBs

Flexible PCBs are printed circuits produced on flexible films, allowing them to be folded or bent to fit the available space or allowing for application movement. We manufacture circuits on flexible substrates that can be installed in three-dimensional applications for electronic packaging systems. Use of flexible circuitry can enable improved reliability and electrical performance, reduced weight and reduced assembly costs when compared with traditional wire harness or ribbon cable packaging. Flexible PCBs

6

can provide for flexible electronic connectivity of an electrical device’s apparatus such as printer heads, cameras, TVs, mobile handsets, and tablets. For some of our flexible PCB customers, we also assemble components onto the flexible PCBs we manufacture.

Rigid-flex PCBs

Rigid-flex circuitry provides a simple means to integrate multiple PCB assemblies and other elements such as display, input or storage devices without wires, cables or connectors, replacing them with thin, light composites that integrate wiring in ultra-thin, flexible ribbons between rigid sections. In rigid-flex packaging, a flexible circuit substrate provides a backbone of wiring with rigid multilayer circuit sections built up as modules where needed.

Since the ribbons can be bent or folded, rigid-flex provides a means to compactly package electronics in three dimensions with dynamic or static bending functions as required, enabling miniaturization and thinness of product design. The simplicity of rigid-flex integration also generally reduces the number of parts and interconnections required, which can improve reliability.

Rigid-flex technology is essential to a broad range of applications including aerospace and defense, industrial and transportation systems requiring high reliability; hand-held and wearable electronics such as, video cameras and music players where thinness and mechanical articulation are essential; and ultra-miniaturized products such as headsets, medical implants and semiconductor packaging where size and reliability are paramount.

Custom assemblies

Our assembly facilities produce custom electronic assemblies. Custom electronic assemblies refers to a variety of PCB assemblies such as backplane and mid-plane assemblies, flexible and rigid-flex assemblies and RF assemblies. Each of these assemblies involves mounting electronic components to a printed circuit board and then testing the assembly for electrical continuity.

IC substrates

IC substrates provide the mechanical support and electrical interconnect used to package ICs (integrated circuits or semiconductors) either in single chip packages or multi-chip modules. IC substrates, also known as chip carriers, are highly miniaturized circuits manufactured by a process largely similar to that for PCBs but requiring the use of ultra-thin materials and including micron-scale features, because they must bridge the gap between sub-micron IC features and millimeter scale PCBs. Consequently, IC substrates are generally manufactured in a clean room environment to ensure products are free of defects and contamination and employ advanced HDI processes and manufacturing approaches used in SLP technology.

Passive RF Components

Our line of products consists of off-the-shelf surface mount microwave components which provide passive microwave signal distribution functions. These products were developed to provide a low-cost high performance signal distribution component, which could be placed on standard printed circuit boards with automated production equipment. The primary applications of these products are currently in equipment for cellular base stations and in WLAN, Bluetooth, and satellite television. In cellular base stations, our surface mount products are utilized in RF power amplifiers, and are also found in low-noise amplifiers, radios, and antennas. 5G advancements and the continued proliferation of wireless technology may create new applications for these products across other end markets.

Advanced Ceramic RF Components

Our ceramic offerings include standard and etched thick-film ceramic substrates. Etched thick-film ceramic circuits compete favorably with thin-film ceramic circuits in cost while providing comparable performance. These products are generally customer designed in close collaboration with our engineering staff to ensure the highest possible performance and manufacturability. These capabilities are aimed at high performance applications in the medical, industrial, and defense markets.

Hi-Reliability Multi-Chip Modules

We offer custom hybrid and multi-chip modules, high-performance radiation-hardened and space-qualified micro-electronics and power management and control electronics.

Beamforming and Switching Networks

Our beamforming technologies are used in military and aerospace applications, offering a variety of active and passive high-performance RF assemblies, including L-band/LEO and L- and S-band/GEO space beamformers, UHF thru Ka-band radar AESA RF networks, Butler matrices, multi-octave, and more.

Quick turnaround services

We refer to our rapid delivery services as “quick turnaround” or “QTA”, because we provide custom-fabricated PCBs to our customers within as little as 24 hours to ten days. As a result of our ability to rapidly and reliably respond to the critical time requirements of our customers, we generally receive premium pricing for our QTA services as compared to standard lead time prices.

7

Thermal management

Increased component density on circuit boards often requires improved thermal dissipation to reduce operating temperatures. We produce printed circuits with heavy copper cores and both embedded and press-fit coins. In addition, we produce PCBs with electrically passive heat sinks laminated externally on a circuit board or between two circuit boards, as well as PCBs with electrically active thermal cores.

Manufacturing Technologies

The market for our products is characterized by rapidly evolving technology. In recent years, the trend in the electronic products industry has been to increase the speed, complexity, and performance of components while reducing their size. We believe our technological capabilities allow us to address the needs of manufacturers to bring complicated electronic products to market faster.

To manufacture PCBs, we generally receive circuit designs directly from our customers in the form of computer data files, which we review to ensure data accuracy and product manufacturability. Processing these data files with computer aided manufacturing (CAM) technology, we generate images of the circuit patterns that we then physically develop on individual layers, using advanced photographic and direct imaging processes. Through a variety of plating and etching processes, we selectively add and remove conductive materials to form horizontal layers of thin circuitry, which are separated by electrical insulating material. A multilayer circuit board is produced by laminating together multiple layers of circuitry, using intense heat and pressure under vacuum. Vertical connections between layers are achieved by drilling and plating through small holes, called vias. Vias are made by highly specialized drilling equipment capable of achieving extremely fine tolerances with high accuracy. We specialize in high layer count PCBs with extremely fine geometries and tolerances. Because of the tolerances involved, we employ clean rooms in certain manufacturing processes where tiny particles might otherwise create defects on the circuit patterns. We also use automated optical inspection systems and electrical testing systems to ensure consistent quality of the circuits we produce.

We believe that our highly specialized equipment and advanced manufacturing processes enable us to reliably produce PCBs with the following characteristics:

8

Our RF Engineering organization principally designs and manufactures state-of-the-art microwave-based hardware for use in advanced radar systems, advanced jamming systems, missiles and decoys, electronic surveillance systems and satellite and ground based communication systems. Several core manufacturing technology areas include:

Customers and Markets

Our customers include both OEMs and EMS companies that primarily serve the aerospace and defense, automotive, computing, medical/industrial/instrumentation, and networking/communications end markets of the electronics industry. Included in the end markets that our OEM and EMS customers serve is the U.S. government. As a result, we are a supplier, primarily as a subcontractor, to the U.S. government. Our five largest OEM customers in 2020 excluding the Mobility business unit were, in alphabetical order, Huawei Technology Co. Ltd., Lockheed Martin Corporation, Northrop Grumman Corporation, Raytheon Technologies and Robert Bosch GmbH.

9

See table in Item 7, Management’s Discussion and Analysis of Financial Condition and Results of Operations for the percentage of our net sales in each of the principal end markets we served.

Sales attributed to OEMs include sales made through EMS providers. Although our contractual relationships are with the EMS companies, we typically negotiate price and volume requirements directly with the OEMs. In addition, we are on the approved vendor lists of several of our EMS providers. This positions us to participate in business that is awarded at the discretion of the EMS provider.

Our sales and marketing strategy focuses on building long-term relationships with our customers’ engineering and new product introduction personnel early in the product development phase, frequently through strategic account management teams. Traditional build-to-print opportunities involve TTM engineering providing design for manufacture reviews and making recommendations for both manufacturability and cost reductions without impacting specifications. Prototype builds to verify design ensue, along with the early stages of production. As the product then matures from the prototype stage to volume production, we shift our focus to the customers’ procurement departments in order to capture sales at each point in the product’s life cycle. Our design to specification capabilities allow us to engage at the onset in the engineering cycle at critical aerospace and defense, automotive, telecommunications, and networking customers as they begin the process of specifying an RF requirement. At that stage, we are able to support our customers by designing a complete or specific portions of an RF solution as well as providing early prototyping and test support for that solution. TTM will then meet the ramp to volume and volume production requirements of our customers.

Our staff of engineers, sales support personnel, and managers assist our sales representatives in advising customers with respect to manufacturing feasibility, design review, and technological capabilities through direct communication and visits. We combine our sales efforts with customer service personnel at each facility to better serve our customers. Each large customer is typically assigned an account manager to coordinate all of the Company’s services across all of our facilities. Additionally, the largest and most strategic customers are also supported by select program management and engineering teams. Our global sales force is comprised of direct sales personnel, complemented by commission-based independent representatives, and supports customers throughout North America, Europe, Asia and the Middle East.

Our North America footprint includes facilities from our PCB and RF&S Components reportable segments with sixteen PCB fabrication plants located in California, Colorado, Connecticut, New Hampshire, New York, Ohio, Oregon, Utah, Virginia, Wisconsin, and Ontario, Canada; and one RF component plant located in New York.

Our China footprint includes facilities from our PCB, RF&S Components and E-M Solutions reportable segments. We have five PCB fabrication plants located in Hong Kong, Huiyang, Dongguan, Guangzhou and Zhongshan, China; one RF component plant located in Suzhou, China; and three custom assembly and system integration operations in Shanghai and Shenzhen, China for most of 2020 until we closed our Shenzhen and Shanghai E-M Solutions facilities in the fourth quarter of 2020. Currently within our E-M Solutions reportable segment, we only have one custom assembly operation in Shanghai, China.

For certain risks attendant to our foreign operations, see Item 1A, Risk Factors.

For information regarding credit to customers, see Note 11 of the Notes to Consolidated Financial Statements.

Suppliers

The primary raw materials we use in PCB manufacturing include copper-clad laminate, chemical solutions such as copper and gold for plating operations, photographic film, carbide drill bits, and plastic for testing fixtures. Although we have preferred suppliers for some raw materials used in the manufacture of PCBs, most of our raw materials are generally readily available in the open market from numerous other potential suppliers.

The primary raw materials we use in RF components, RF subsystems, backplane assemblies and other PCB assemblies are manufactured components such as PCBs, ceramic and ferrite substrates, connectors, capacitors, resistors, diodes and integrated circuits, many of which are custom made and controlled by our customers’ approved vendors. The more complicated RF subsystems may require us to purchase integrated sub-assemblies and super-components such as RF oscillators, frequency converters, power supplies and microprocessors. These components for backplane assemblies and other PCB assemblies in some cases have limited or sole sources of supply. For example, in some instances, our customers will require us to use a specific component from a particular supplier or require us to use a component provided by the customer itself, in which case we may have a single or limited number of suppliers for these specific components. The backplane assemblies, PCB assemblies and precision metal fabricated chassis and enclosures produced by us may be incorporated into a fully integrated and tested system delivered to our customer. These products often incorporate procured power, thermal, interconnect and mechanical components sourced from the customer directed or our selected suppliers.

We typically use just-in-time procurement practices to maintain our raw materials inventory at low levels and work closely with our suppliers to obtain technologically advanced raw materials. In addition, we periodically seek alternative supply sources to ensure that we are receiving competitive pricing and service. While we have experienced shortages in the market place for certain specific raw materials, we believe we can acquire adequate raw materials in the future.

10

Competition

Despite industry consolidation, the PCB industry remains fragmented and characterized by intense competition. There are several competitive factors our customers consider when choosing their supplier including, but not limited to, technical capabilities, pricing, service, support, reliability, quality production and location. Our principal PCB and substrate competitors include AT&S (Austria Technologie & Systemtechnik Aktiengesellschaft), Chin-Poon Industrial Co., Ltd., ISU Petasys Co., Ltd., Sanmina Corporation, Shennan Circuits Co., Ltd., Suzhou Dongshan Precision Manufacturing Co., Ltd., Tripod Technology Corporation, Unimicron Technology Corporation, WUS Printed Circuit Co., Ltd., and Zhen Ding Technology Holding Ltd. Our competition for RF products include Cobham plc, Crane Aerospace & Electronics, Mercury Systems, Inc., RN2 Technologies Co., and Smiths Group plc.

We believe that our key competitive strengths include:

Leading global PCB manufacturer.    We are one of the largest and most diversified PCB manufacturers in the world and enjoy significant economies of scale, with net sales of approximately $2.1 billion for fiscal 2020. The PCB industry is highly fragmented with the top 40 PCB providers comprising approximately 72% of market share based on 2019 revenue, according to Prismark Partners. As our customers consolidate their supply base, we offer the technology breadth and scale to emerge as a preferred partner.

Breadth of technology and products.     We offer a wide range of PCB and RF products, including HDI PCBs, conventional PCBs, flexible PCBs, rigid-flex PCBs, custom assemblies, passive RF components, advanced ceramic RF components, hi-reliability multi-chip modules, beamforming and switching networks and integrated circuit (IC) substrates. We also offer certain value-added services to support our customers’ needs. These include RF design to specification capability, design for manufacturability (DFM), PCB layout design, simulation and testing services, and QTA services. By providing these value-added services to customers, we are able to provide our customers with a “one-stop” manufacturing solution, which we believe enhances our relationships with our customers.

Diversified business model.    Our sales are diversified by a well-balanced portfolio of end markets which we serve and by the customers we sell to within those end markets. We believe this diversity reduces our exposure to, and reliance on, any single end market or customer. We enjoy a large and diverse customer base with over 1,600 customers, as well as long-term relationships in excess of ten years with our ten largest customers. Furthermore, for fiscal 2020, our five largest customers are not concentrated in any single end market, but rather are represented across three of our end markets.

Focused on attractive end markets with a favorable growth outlook and dependence on sophisticated product capabilities.    We believe that our global manufacturing footprint and breadth of capabilities enables us to serve multiple key end markets for the PCB industry. The aerospace & defense industry in particular provides an opportunity for us as we combine our traditional market strength in core PCB technology with the advanced technologies and RF capabilities we offer for growing requirements in AESA radar systems for defense applications.

One-stop solution for customers.    We are capable of providing a one-stop design, manufacturing and test solution to our customers with design services, engineering support and prototype development through final volume production around the globe. This one-stop solution allows us to better serve our customers, many of whom are based in time-critical high growth markets, enabling our customers to reduce the time required to develop new products and bring them to market. We utilize a facility specialization strategy in which each customer is directed to the facility best suited to the customer’s product type, delivery time, complexity and volume needs, which enables us to reduce the time from order placement to delivery. As our commercial customers ramp to volume, we are positioned to seamlessly transition them to one of our volume facilities in China.

Leading aerospace and defense supplier.    We have passed OEM and government certification processes, and administrative requirements associated with participation in government and commercial aerospace programs. When supplying various departments and agencies of the U.S. government, we are required to maintain facility security clearances under the National Industrial Security Program Operating Manual (NISPOM) and International Traffic in Arms Regulations (ITAR). Along with supply of traditional and RF PCBs, we offer a variety of RF components and sub-assemblies, as well as our engineering services and assembly capabilities which allow us to bring additional value to our customers.

Seasonality

Orders for our products generally correspond to the production schedules of our customers. We historically experience seasonal fluctuations in the first quarter due to the Chinese New Year holidays, which typically results in lower net sales for that quarter. We attribute this decline to shutdowns of our customers’ and our own China based manufacturing facilities surrounding the Chinese New Year public holidays, which normally occur in January or February of each year.

Intellectual Property

We now have a total of more than 165 patents, with approximately 20 pending patent applications. Most of these patents stem from our 2018 acquisition of Anaren and 2019 asset and technology acquisition from i3 Electronics, Inc. (i3). Our PCB business depends on the effectiveness of our fabrication techniques, proprietary PCB structures, and our ability to continually improve our manufacturing processes. We rely on the collective experience of our employees in the manufacturing process to ensure that we

11

continuously evaluate and adopt new technologies available within our industry. In addition, we depend on robust training, recruiting, and retention of our employees, who are required to be knowledgeable in the operation of advanced equipment and complicated manufacturing processes. In regards to our RF products, the vast majority are proprietary and protected or covered by approximately thirty-two patents and ten currently pending patent applications directed towards products for both the wireless infrastructure and aerospace and defense markets.

National Security Matters

A portion of our business consists of manufacturing defense and defense-related items for various departments and agencies of the U.S. government, including the U.S. Department of Defense (DoD), which requires that we maintain facility security clearances under the NISPOM. The NISPOM requires that a corporation with significant foreign ownership maintaining a facility security clearance take steps to prevent foreign control or influence, referred to as “FOCI.” Pursuant to these laws and regulations, effective October 2010, we entered into a Special Security Agreement (SSA) with the DoD; Su Sih (BVI) Limited, or Su Sih (a foreign owner of our capital stock), and Mr. Tang Hsiang Chien (as the beneficial owner of Su Sih). At that time, Su Sih owned approximately 35% of the total outstanding shares of our common stock and Mr. Tang was a board member of the Company. Mr. Tang is no longer a member of our board and, based on the most recent filings by Mr. Tang and Su Sih with the SEC, Su Sih owns less than 6% of the Company, thereby reducing the concern of Su Sih or Mr. Tang influencing the Company to compromise classified information or adversely affect the performance of classified contracts.

Other Governmental Regulations

Our operations, particularly those in North America, are subject to a broad range of regulatory requirements relating to export control, environmental compliance, waste management, and health and safety matters. In particular, we are subject to the following:

The process to manufacture PCBs requires adherence to city, county, state, federal, and foreign environmental laws and regulations regarding the storage, use, handling, and disposal of chemicals, solid wastes and other hazardous materials, as well as compliance with wastewater and air quality standards. We believe that our facilities in the United States and Canada comply in all material respects with applicable environmental laws and regulations. In China, the government has a history of changing legal requirements with no or minimal notice. We believe that our facilities in China comply in all material respects with current applicable environmental laws and regulations and has resources in place to maintain compliance to them. The capital expenditure costs expected for environmental improvement initiatives are included in our annual capital expenditure projections.

12

Human Capital

How we manage and leverage our human capital is essential in executing our strategy. At TTM, a key differentiator is our culture, which has been shaped through considerable thought and energy. Our culture has served us well as we integrate acquired companies and optimize our organizational structures and teams to better serve our customers. The following elements underpin our culture:

Commitment to Values and Ethics.     The foundation of TTM’s strategic vision is its corporate culture and its way of doing business with integrity, teamwork, clear communication, and performance excellence. We demonstrate the importance we place on these values through our goal setting and performance management process as well as providing ethics training to employees every year.

Along with the TTM Values and our Leadership Principles, we discuss and act in accordance with, and provide annual training for, our Code of Conduct (“Code of Conduct”), which outlines our expectations and provides guidance for all employees. Our Code of Conduct includes topics such as anti-corruption, discrimination, harassment, privacy, appropriate use of company assets, protecting confidential information, and reporting Code of Conduct violations. Our Code of Conduct reinforces the importance of fostering an open, welcoming environment in which all employees have a voice and a confidential outlet to raise concerns regarding potential violations.

Our commitment to our communities is demonstrated through our volunteer efforts, charitable donations, and sponsorships. As an employer, our local sites choose the organizations to affiliate with that best reflect our values. Some examples are: Second Harvest Food Bank, Toys for Tots, United Way, Ronald McDonald House, and Habitat for Humanity.

Talent Development & Acquisition.     Talent development is a collective and continuous effort of all of our people managers. We engage in regular talent reviews to calibrate on performance and potential development gaps and progress, and evaluate the depth and strength of our integrated succession plans. Our approach to learning is a continuous one, regardless of experience level or tenure. We extend leadership development programs with individually tailored development plans anchored in dedicated coaching and separate internal mentors. Additionally, we extend competency-based training, sponsor job rotations, and form project teams comprised of emerging talents. We provide tuition reimbursement and assistance, as well as a monthly stipend to engineers to pay down student debt. In 2020, we expanded our online learning platforms, offerings, and tools, as we continued our effort to build a global learning management system. While we primarily develop internal talent for expanded roles, we have curated an annual summer technical internship program most recently focused on robotics and automation. Coupled with co-op programs in some locations, this technical talent pipeline feeds our succession planning efforts.

Diversity, Equity and Inclusion (DEI).     Recognizing and respecting our global presence, we strive to maintain a diverse and inclusive workforce that reflects the communities that we serve. As part of our efforts, TTM’s DEI Council works collaboratively across the organization to drive our DEI strategy and support key initiatives focused on continuing to cultivate university partnerships to further shape our early career talent pipeline. Our US workforce is approximately 50% ethnically diverse and comprised of nearly 40% females. We are committed to having a diverse talent pipeline and have trained our talent acquisition team and human resources personnel in diversity sourcing strategies. TTM has memberships with external partner organizations to attract diverse talent. Our targeted outreach to our internship program has yielded over 50% diversity hires. Our sites actively participate in campus hiring and job fairs throughout the year, supporting various events within each region and driving recruitment campaigns that leverage our social media platforms; this is in addition to specific campaigns dedicated to diversity and veteran hiring. We have also expanded and continue to develop our existing policies and training against harassment, bullying and the elimination of bias in the workplace.

13

Employee Engagement & Turnover.     We periodically survey our employees and benefit from favorable participation rates to identify and act on specific opportunities to enhance our work environment, improve communications, and strengthen the connection between supervisors and employees. In the midst of the COVID-19 pandemic, we focused our most recent survey on employee care, our response to COVID-19 including safety protocols and communications, and the transition to remote work for approximately 10% of our workforce.

In 2020, we pivoted to a virtual platform to hold our town hall sessions, change agent network meetings, and quarterly business updates with management teams. Our change agent network was created to improve communications from the factory and office floor up to the senior management team. We select several employees within each site who are respected, influential and representative of the employee base to serve as change agents. This network discusses and then communicates the key initiatives within the sites in addition to raising employee concerns. Additionally, these teams prioritize site initiatives around community activities, site improvement projects, recognition programs, and new communication methods.

We review employee turnover rates paying particular attention to supervisor and technical retention. We believe the emphasis we place on selecting, training and coaching supervisors positively impacts their ability to lead people. Our leadership principles of communications, collaboration and career development are designed to improve the employee experience and strengthen working relationships. Through internal surveys, it is clear our employees value their relationships with their supervisors, career opportunities and the corporate culture.

Compensation and Benefits.     We continually review our compensation and benefit programs to ensure we are in line with market conditions. In addition to competitive wages, all employees participate in one of our variable incentive programs which rewards for performance. These range from comprehensive benefit plans for eligible employees including mental health, employee assistance program (EAP), telemedicine offerings, several medical and dental plans with qualifying employer funded health savings accounts, life insurance, specialty programs for diabetes and weight loss, wellness challenges, and an on-site health & physical therapy center at our largest U.S. facility.

Employee Health & Safety.     TTM moved quickly at the onset of the COVID-19 pandemic to ensure a safe environment for our employees by activating our global pandemic response plan. Early lessons learned from our Asia teams helped shape and guide our progressive safety protocols for the remainder of the Company. Our regional leadership teams, with guidance from executive management, developed and implemented safeguards consisting of policies, procedures, and lessons learned reports covering: COVID-19 symptom awareness, effective hygiene practices, travel restrictions, visitor vetting and screening, social distancing, face covering expectations, temperature and health screening, work-from-home requirements, enhanced workplace cleaning, and large-scale decontamination. Notable achievements from 2020 include:

Employee Data

As of December 28, 2020, we had approximately 16,700 employees. Of our employees, approximately 15,500 were involved in manufacturing and engineering, 500 worked in sales and marketing, and approximately 700 worked in accounting, information systems and other support capacities. Of our 5,500 U.S. employees, none are represented by unions. In China, approximately 10,300 employees are members of the All-China Federation of Trade Unions and accordingly are considered to be represented by a labor union. We believe that our relations with both our union and non-union employees are generally satisfactory.

Availability of Reports Filed with the Securities and Exchange Commission

We are a Delaware corporation founded in 1998, with our principal executive offices located at 200 East Sandpointe, Suite 400, Santa Ana, CA 92707. Our telephone number is (714) 327-3000. Our website address is www.ttm.com. Information included on our website is not incorporated into this report. Our annual reports on Form 10-K, quarterly reports on Form 10-Q, current reports on Form 8-K and amendments to those reports are available without charge on our website at https://investors.ttm.com/, as soon as reasonably practicable after they are filed with or furnished electronically to the Securities and Exchange Commission (SEC). Our SEC filings are also available to the public at www.sec.gov. Copies are also available without charge by (i) telephonic request by calling our Investor Relations Department at (714) 327-3000, (ii) e-mail request to investor@ttmtech.com, or (iii) a written request to TTM Technologies, Inc., Attention: Investor Relations, 200 East Sandpointe, Suite 400, Santa Ana, CA 92707.

14

An investment in our common stock involves a high degree of risk. You should carefully consider the factors described below, in addition to those discussed elsewhere in this report, in analyzing an investment in our common stock. If any of the events described below occurs, our business, financial condition, and results of operations would likely suffer, the trading price of our common stock could fall, and you could lose all or part of the money you paid for our common stock. The risk factors described below are not the only ones we face. Risks and uncertainties not known to us currently, or that may appear immaterial, also may have a material adverse effect on our business, financial condition, and results of operations.

In addition, the following risk factors and uncertainties could cause our actual results to differ materially from those projected in our forward-looking statements, whether made in this report or the other documents we file with the SEC, or our annual or quarterly reports to stockholders, future press releases, or orally, whether in presentations, responses to questions, or otherwise.

Risks Related to our Business

We serve customers and have manufacturing facilities throughout the world and are subject to global pandemic and other similar risks, including without limitation, COVID-19, which could materially adversely affect our business, financial condition, and results of operations.

Global pandemics or other disasters or public health concerns in regions of the world where we have operations or source material or sell products could result in the disruption of our business. Specifically, these pandemics, disasters and health concerns can result in increased travel restrictions and extended shutdowns of certain businesses in the region, as well as social, economic, or labor instability. Disruptions in our product shipments or impacts on our manufacturing in affected regions over a prolonged period could have a material adverse impact on our business and our financial results.

On March 11, 2020, the World Health Organization announced that COVID-19 infections had become a pandemic, and on March 13, 2020, the U.S. President announced a National Emergency relating to the disease. Widespread infection in the United States and abroad has the potential for catastrophic impact. National, state and local authorities have recommended social distancing and have imposed or are considering quarantine and isolation measures on large portions of the population, including mandatory business closures. These measures, while intended to protect human life, are expected to have serious adverse impacts on domestic and foreign economies of uncertain severity and duration. The effectiveness of economic stabilization efforts, including proposed government payments to affected citizens and industries, is uncertain.

In particular, our business may be negatively impacted by the fear of exposure to or actual effects of COVID-19 and other disease outbreaks, epidemics, pandemics and similar widespread public health concerns. These impacts include but are not limited to:

Any of the foregoing factors, or other cascading effects that are not currently foreseeable, could materially increase our costs, negatively impact our sales or damage the Company’s financial condition, results of operations, cash flows and its liquidity position, possibly to a significant degree. The duration of any such impacts cannot be predicted because of the sweeping and uncertain nature of the circumstances involving the COVID-19 pandemic.

Uncertainty and adverse changes in the economy and financial markets, including the worldwide electronics industry, could have an adverse impact on our business and operating results.

Uncertainty or adverse changes in the economy could lead to a significant decline in demand for the end products manufactured by our customers, which, in turn, could result in a decline in the demand for our products and pressure to reduce our prices. Any decrease in demand for our products could have an adverse impact on our financial condition, operating results and cash flows. Uncertainty and adverse changes in the economy could also increase the cost and decrease the availability of potential sources of

15

financing and increase our exposure to losses from bad debts, either of which could have a material adverse effect on our financial condition, operating results and cash flows.

A majority of our revenue is generated from the electronics industry, which is characterized by intense competition, relatively short product life cycles, and significant fluctuations in product demand. The industry is subject to economic cycles and recessionary periods. Due to the uncertainty in the end markets served by most of our customers, we have a low level of visibility with respect to future financial results. Consequently, our past operating results, earnings, and cash flows may not be indicative of our future operating results, earnings, and cash flows.

We serve customers and have manufacturing facilities outside the United States and are subject to the risks characteristic of international operations, including recently imposed tariffs.

We have significant manufacturing operations in Asia and Canada and sales offices located in Asia and Europe. We continue to consider additional opportunities to make foreign investments and construct new foreign facilities.

For the year ended December 28, 2020, we generated approximately 51% of our net sales from non-U.S. operations, and a significant portion of our manufacturing material was provided by international suppliers during this period. The United States’ trade policies and those of foreign countries are subject to change which could adversely affect our ability to purchase and sell goods and materials without significant tariffs, taxes or duties that may be imposed on the materials we purchase or the goods we sell, thereby increasing the cost of such materials and potentially decreasing our margins. Further, our revenues could be impacted if our customers’ ability to sell their goods is reduced by such tariffs, taxes or duties. Both the U.S. and Chinese governments have included PCBs among items subjected to tariffs imposed on imports from such countries, which may negatively impact our revenue and profitability. In addition, we are subject to risks relating to significant international operations, including but not limited to:

We are subject to risks of currency fluctuations.

A portion of our cash, other current assets and current liabilities is held in currencies other than the U.S. dollar. Changes in exchange rates among other currencies and the U.S. dollar will affect the value of these assets or liabilities as re-measured to U.S.

16

dollars on our balance sheet. To the extent that we ultimately decide to repatriate some portion of these funds to the United States, the actual value transferred could be impacted by movements in exchange rates. Any such type of movement could negatively impact the amount of cash available to fund operations or to repay debt. Additionally, we have revenues and costs denominated in currencies other than the U.S. dollar (primarily the Renminbi (RMB)). Fluctuations in the exchange rates between the U.S. dollar and the RMB could result in increases or decreases in our costs or revenues which could negatively impact our business, financial condition, and results of operations. Significant inflation or disproportionate changes in foreign exchange rates could occur as a result of general economic conditions, acts of war or terrorism, changes in governmental monetary or tax policy, or changes in local interest rates Further, China’s government imposes controls over the convertibility of RMB into foreign currencies, which subjects us to further currency exchange risk.

We have pursued and intend to continue to pursue potential divestitures of assets and acquisitions of other businesses and may encounter risks associated with these activities, which could harm our business and operating results. If we are unable to manage our growth effectively, our business, financial condition, and results of operations could be materially adversely affected.

As part of our business strategy, we expect that we will continue to align our strategy by pursuing potential divestitures of assets and acquisitions of businesses, technologies, assets, or product lines that complement or expand our business. Risks related to such activity may include:

Acquisitions may cause us to:

Acquisitions of high technology companies are inherently risky, and no assurance can be given that our recent or future acquisitions will be successful. Failure to manage and successfully integrate acquisitions we make could have a material adverse effect

17

on our business, financial condition, and results of operations. Even when an acquired company has already developed and marketed products, product enhancements may not be made in a timely fashion. In addition, unforeseen issues might arise with respect to such products after any such acquisition.

As we continue to experience growth in the scope and complexity of our operations, we may be required to continue to implement additional operating and financial controls and hire and train additional personnel. There can be no assurance that we will be able to do so in the future, and failure to do so could jeopardize our expansion plans and seriously harm our operations. In addition, growth in our capacity could result in reduced capacity utilization and a corresponding decrease in gross margins.

If we are unable to maintain satisfactory capacity utilization rates, our business, financial condition, and results of operations would be materially adversely affected.

Given the high fixed costs of our operations, decreases in capacity utilization rates can have a significant effect on our business. Accordingly, our ability to maintain or enhance gross margins will continue to depend, in part, on maintaining satisfactory capacity utilization rates. In turn, our ability to maintain satisfactory capacity utilization will depend on the demand for our products, the volume of orders we receive, and our ability to offer products that meet our customers’ requirements at competitive prices. If current or future production capacity fails to match current or future customer demands, our facilities would be underutilized, our sales may not fully cover our fixed overhead expenses, and we would be less likely to achieve expected gross margins. If forecasts and assumptions used to support the realizability of our long-lived assets change in the future, significant impairment charges could result that would materially adversely affect our business, financial condition, and results of operations.

In addition, we generally schedule our quick turnaround production facilities at less than full capacity to retain our ability to respond to unexpected additional quick-turn orders. However, if these orders are not received, we may forego some production and could experience continued excess capacity. If we conclude we have significant, long-term excess capacity, we may decide to permanently close one or more of our facilities and lay off some of our employees. Closures or lay-offs could result in our recording restructuring charges such as severance, other exit costs, and asset impairments, as well as potentially causing disruptions in our ability to supply customers.

We have a significant amount of goodwill and other intangible assets on our consolidated balance sheet. If our goodwill or other intangible assets become impaired in the future, we would be required to record a non-cash charge to earnings, which may be material and would also reduce our stockholders’ equity.

As of December 28, 2020, our consolidated balance sheet included $918.6 million of goodwill and definite-lived intangible assets. During the year ended December 28, 2020, the Company recorded an impairment charge for goodwill of $69.2 million related to its RF and Specialty Components (RF&S Components) reportable segment. We periodically evaluate whether events and circumstances have occurred, such that the potential for reduced expectations for future cash flows coupled with further decline in the market price of our stock and market capitalization may indicate that the remaining balance of goodwill and definite-lived intangible assets may not be recoverable. If factors indicate that assets are impaired, we would be required to reduce the carrying value of our goodwill and definite-lived intangible assets, which could harm our results during the periods in which such a reduction is recognized.

Our results of operations are often subject to demand fluctuations and seasonality. With a high level of fixed operating costs, even small revenue shortfalls would decrease our gross margins.

Our results of operations fluctuate for a variety of reasons, including:

A significant portion of our operating expenses is relatively fixed in nature, and planned expenditures are based in part on anticipated orders. Accordingly, unexpected revenue shortfalls may decrease our gross margins. In addition, we have experienced sales fluctuations due to seasonal patterns in the capital budgeting and purchasing cycles, as well as inventory management practices of our customers and the end markets we serve. These seasonal trends have caused fluctuations in our operating results in the past and may continue to do so in the future. Results of operations in any period should not be considered indicative of the results that may be expected for any future period. In addition, our future quarterly operating results may fluctuate and may not meet the expectations of securities analysts or investors.

18

We participate in the competitive, cyclical automotive industry, which is subject to strict quality control standards. Failure to meet quality standards may adversely affect our business, financial condition and results of operations.

A significant portion of our sales are to customers within the automotive industry. The automotive industry has historically experienced multi-year cycles of growth and decline. If sales of automobiles should decline or go into a cyclical down turn, our sales could decline and this could have a materially adverse impact on our business, financial condition and result of operations.

In addition, for safety reasons, automotive customers have strict quality standards that generally exceed the quality requirements of other customers. If such products do not meet these quality standards, our business, financial condition, and results of operations may be materially adversely affected. These automotive customers may require long periods of time to evaluate whether our manufacturing processes and facilities meet their quality standards. If we were to lose automotive customers due to quality control issues, we might not be able to regain those customers or gain new automotive customers for long periods of time, which could have a material adverse effect on our business, financial condition, and results of operations. Moreover, we may be required under our contracts with automotive industry customers to indemnify them for the cost of warranties and recalls relating to our products.

The prominence of EMS companies as our customers could reduce our gross margins, potential sales, and customers.

Sales to EMS companies represented approximately 37%, 36% and 40% of our net sales for the years ended December 28, 2020, December 30, 2019 and December 31, 2018, respectively. Sales to EMS providers include sales directed by OEMs as well as orders placed with us at the EMS providers’ discretion. EMS providers source on a global basis to a greater extent than OEMs. The growth of EMS providers increases the purchasing power of such providers and has in the past, and could in the future, result in increased price competition or the loss of existing OEM customers. In addition, some EMS providers, including some of our customers, have the ability to directly manufacture PCBs and create backplane assemblies. If a significant number of our other EMS customers were to acquire these abilities, our customer base might shrink, and our sales might decline substantially. Moreover, if any of our OEM customers outsource the production of PCBs and creation of backplane assemblies to these EMS providers, our business, financial condition, and results of operations may be materially adversely affected.

We depend upon a relatively small number of OEM customers for a large portion of our sales, and a decline in sales to major customers would materially adversely affect our business, financial condition, and results of operations.

A small number of customers are responsible for a significant portion of our sales. Our five largest OEM customers accounted for approximately 29%, 27% and 25% of our net sales for the years ended December 28, 2020, December 30, 2019 and December 31, 2018, respectively, and one customer represented 11% of our net sales for the year ended December 28, 2020. Furthermore, our business has benefited from OEMs deciding to outsource their PCB manufacturing and backplane assembly needs to us, and our future revenue growth partially depends on new outsourcing opportunities from OEMs. Sales attributed to OEMs include both direct sales as well as sales that the OEMs place through EMS providers. Our customer concentration could fluctuate, depending on future customer requirements, which will depend in large part on market conditions in the electronics industry segments in which our customers participate. The loss of one or more significant customers or a decline in sales to our significant customers would materially adversely affect our business, financial condition, and results of operations. In addition, we generate significant accounts receivable in connection with providing manufacturing services to our customers. If one or more of our significant customers were to become insolvent or were otherwise unable to pay for the manufacturing services provided by us, our business, financial condition, and results of operations would be materially adversely affected.

In addition, during industry downturns, we may need to reduce prices to limit the level of order losses, and we may be unable to collect payments from our customers. There can be no assurance that key customers would not cancel orders, that they would continue to place orders with us in the future at the same levels as experienced by us in prior periods, that they would be able to meet their payment obligations, or that the end-products that use our products would be successful. This concentration of customer base may materially adversely affect our business, financial condition, and results of operations due to the loss or cancellation of business from any of these key customers, significant changes in scheduled deliveries to any of these customers, or decreases in the prices of the products sold to any of these customers.

We depend on the U.S. government for a significant portion of our business, which involves unique risks. Changes in government defense spending or regulations could have a material adverse effect on our business, financial condition, and results of operations.

A significant portion of our revenues is derived from products and services that are ultimately sold to the U.S. government by our OEM and EMS customers and is therefore affected by, among other things, the federal government budget process. We are a supplier, primarily as a subcontractor, to the U.S. government and its agencies, as well as foreign governments and agencies. The contracts between our direct customers and the government end user are subject to political and budgetary constraints and processes, changes in short-range and long-range strategic plans, the timing of contract awards, the congressional budget authorization and appropriation processes, the government’s ability to terminate contracts for convenience or for default, as well as other risks, such as contractor suspension or debarment in the event of certain violations of legal and regulatory requirements.

19

For the year ended December 28, 2020, aerospace and defense sales accounted for approximately 36% of our total net sales. The substantial majority of aerospace and defense sales are related to both U.S. and foreign military and defense programs. While we do not sell any significant volume of products directly to the U.S. government, we are a supplier to OEMs that sell to the U.S. government and its agencies, as well as foreign governments and agencies. Consequently, our sales are affected by changes in the defense budgets of the U.S. and foreign governments and may be affected by federal budget sequestration measures.

The domestic and international threat of terrorist activity, emerging nuclear states, and conventional military threats have led to an increase in demand for defense products and services and homeland security solutions in the recent past. Although a two-year budget agreement has recently been approved by the U.S. government and the budget agreement includes sustained spending on defense programs, the termination or failure to fund one or more significant contracts by the U.S. government could have a material adverse effect on our business, financial condition, and results of operations.

Future changes to the U.S. Munitions List could reduce or eliminate restrictions that currently apply to some of the products we produce. If these regulations or others are changed in a manner that reduces restrictions on products being manufactured overseas, we would likely face an increase in the number of competitors and increased price competition from overseas manufacturers, who are restricted by the current export laws from manufacturing products for U.S. defense systems.

We are exposed to the credit risk of some of our customers and to credit exposures in weakened markets.

Most of our sales are on an “open credit” basis, with standard industry payment terms. We monitor individual customer payment capability in granting such open credit arrangements, seek to limit such open credit to amounts we believe the customers can pay, and maintain reserves we believe are adequate to cover exposure for doubtful accounts. During periods of economic downturn in the electronics industry and the global economy, our exposure to credit risks from our customers increases. Although we have programs in place to monitor and mitigate the associated risks, such programs may not be effective in reducing our credit risks.

Additionally, our OEM customers often direct a significant portion of their purchases through a relatively limited number of EMS companies. Sales to EMS companies represented approximately 37%, 36% and 40% of our net sales for the years ended December 28, 2020, December 30, 2019 and December 31, 2018, respectively. Our contractual relationship is often with the EMS companies, who are obligated to pay us for our products. Because we expect our OEM customers to continue to direct our sales to EMS companies, we expect to continue to be subject to this credit risk with a limited number of EMS customers. If one or more of our significant customers were to become insolvent or were otherwise unable to pay us, our business, financial condition, and results of operations would be materially adversely affected.

We rely on suppliers and equipment manufacturers for the timely delivery of raw materials, components, equipment and spare parts used in manufacturing our PCBs. If a raw material supplier or equipment manufacturer goes bankrupt, liquidates, consolidates out of existence or fails to satisfy our product quality standards, or if the prices or availability of raw materials change, it could harm our ability to purchase new manufacturing equipment, service the equipment we have, or timely produce our products, thereby affecting our customer relationships.

To manufacture PCBs, we use raw materials such as laminated layers of fiberglass, copper foil, chemical solutions, gold, copper and other commodity products, which we order from our suppliers. For RF components, we use various high-performance materials such as ceramics and printed circuit board materials. In the case of backplane assemblies, components include connectors, sheet metal, capacitors, resistors and diodes, many of which are custom made and controlled by our customers’ approved vendors.

Consolidations and restructuring in our supplier base and equipment fabricators related to our raw materials purchases or the manufacturing equipment we use to fabricate our products may result in adverse changes in pricing of materials due to reduction in competition among our raw material suppliers or an elimination or shortage of equipment and spare parts from our manufacturing equipment supply base. Suppliers and equipment manufacturers may be impacted by other events outside our control including macro-economic events, financial instability, environmental occurrences, or supplier interruptions due to fire, natural catastrophes, public health crises (including, but not limited to, the COVID-19 pandemic) or otherwise. Suppliers and equipment manufacturers may extend lead times, limit supplies, or increase prices due to capacity constraints or other factors, which could harm our ability to deliver our products on a timely basis and negatively impact our financial results. In addition, in extreme circumstances, the suppliers we purchase from could cease production due to a fire, natural disaster, consolidation or liquidation of their businesses. As such, this may impact our ability to deliver our products on a timely basis, harm our customer relationships and negatively impact our financial results.

If raw material and component prices increase or if there is inflationary pressure on the cost of the metals that we use to produce our product, especially if the prices of copper, gold, palladium and other precious metals we use to manufacture our products increase, it may reduce our gross margins. Should the supply of materials used in the above manufacturing processes become limited, our ability to obtain the quantities necessary to meet our customers’ demand may be impacted which could cause us to encounter reduced revenue levels or price increases which would impact our profit margins. If either of these situations occurs, our financial condition and results of operations could be negatively impacted.

20

Our business, financial condition, and results of operations could be materially adversely affected by climate change initiatives.

Our manufacturing processes require that we purchase significant quantities of energy from third parties, which results in the generation of greenhouse gases, either directly on-site or indirectly at electric utilities. Both domestic and international legislation to address climate change by reducing greenhouse gas emissions could create increases in energy costs and price volatility. Considerable international attention is now focused on development of an international policy framework to guide international action to address climate change. Proposed and existing legislative efforts to control or limit greenhouse gas emissions could affect our energy sources and supply choices, as well as increase the cost of energy and raw materials that are derived from sources that generate greenhouse gas emissions.

Competition in the PCB market is intense, and we could lose market share, or our profit margins may decrease, if we are unable to maintain our current competitive position in end markets using our quick-turn, high technology, and high-mix manufacturing services.

The PCB industry is intensely competitive, highly fragmented, and rapidly changing. We expect competition to continue, which could result in price reductions, reduced gross margins, and loss of market share. In addition, we increasingly compete on an international basis, and new and emerging technologies may result in new competitors entering our markets.

Some of our competitors and potential competitors have advantages over us, including:

In addition, these competitors may respond more quickly to new or emerging technologies or adapt more quickly to changes in customer requirements than we do. We must continually develop improved manufacturing processes to meet our customers’ needs for complex products, and our manufacturing process technology is generally not subject to significant proprietary protection. During recessionary periods in the electronics industry, our strategy of providing quick-turn services, an integrated manufacturing solution, and responsive customer service may take on reduced importance to our customers. As a result, we may need to compete more on the basis of price, which would cause our gross margins to decline.

We and some of our competitors have reduced average selling prices in the past. In addition, competitors may reduce their average selling prices faster than our ability to reduce costs, which can also accelerate the rate of decline of our selling prices. When prices decline, we may also be required to write down the value of our inventory.

If we are unable to adapt our design and production processes in response to rapid technological change and process development, we may not be able to compete effectively.

The markets for our products and manufacturing services are characterized by rapidly changing technology and continual implementation of new designs and production processes. The future success of our business will depend in large part upon our ability to maintain and enhance our technological capabilities, to design and manufacture products that meet changing customer needs, and to successfully anticipate or respond to technological changes on a cost-effective and timely basis. We expect that the investment necessary to maintain our technological position will increase as customers make demands for products and services requiring more advanced technology on a quicker turnaround basis. For example, in 2021 in our PCB segment, we expect to continue to make significant capital expenditures to expand our HDI, RF technology, and other advanced manufacturing capabilities while in our RF&S Components segment, we are designing products that we hope our customers adopt and incorporate into their products. We may not be able to obtain access to additional sources of funds in order to respond to technological changes as quickly as our competitors. In addition, our failure to adopt and implement technological improvements quickly may cause inefficiencies in our production process as our product yields or quality may decrease, resulting in increased costs, and may lead to customers not adopting our product designs.

We also could encounter competition from new or revised manufacturing, production and design technologies that render existing manufacturing, production and design technology less competitive or obsolete. We may not respond effectively to the technological requirements of the changing market. If we need new technologies and equipment or if we are not able to design new

21

products acceptable to customers to remain competitive, the development, acquisition, and implementation of those designs, technologies and equipment may require us to make significant capital investments.

Products we manufacture may contain design or manufacturing defects, which could result in reduced demand for our services and liability claims against us.

We manufacture products to our customers’ specifications, which are highly complex and may contain design or manufacturing errors or failures, despite our quality control and quality assurance efforts. Defects in the products we manufacture, whether caused by a design, manufacturing, or materials failure or error, may result in delayed shipments, customer dissatisfaction, a reduction or cancellation of purchase orders, or liability claims against us. If these defects occur either in large quantities or too frequently, our business reputation may be impaired. Since our products are used in products that are integral to our customers’ businesses, errors, defects, or other performance problems could result in financial or other damages to our customers beyond the cost of the PCB, for which we may be liable. Although our invoices and sales arrangements generally contain provisions designed to limit our exposure to product liability and related claims, existing or future laws or unfavorable judicial decisions could negate these limitation of liability provisions. In addition, we manufacture products for a range of automotive customers. If any of our products are or are alleged to be defective, we may be required to participate in a recall of such products. As suppliers become more integral to the vehicle design process and assume more of the vehicle assembly functions, vehicle manufacturers are increasingly looking to their suppliers for contributions when faced with product liability claims or recalls. In addition, vehicle manufacturers, which have traditionally borne the costs associated with warranty programs offered on their vehicles, are increasingly requiring suppliers to guarantee or warrant their products and may seek to hold us responsible for some or all of the costs related to the repair and replacement of parts supplied by us to the vehicle manufacturer.

We may be unable to hire and retain sufficient qualified personnel, and the loss of any of our key executive officers could materially adversely affect our business, financial condition, and results of operations.

We believe that our future success will depend in large part on our ability to attract and retain highly skilled, knowledgeable, sophisticated, and qualified managerial and professional personnel. Furthermore, we have limited patent or trade secret protection for our manufacturing processes and rely on the collective experience of our employees involved in our manufacturing processes to ensure that we continuously evaluate and adopt new technologies in our industry. We may not be able to retain our executive officers and key personnel or attract additional qualified management in the future. We can make no assurances that future changes in executive management will not have a material adverse effect on our business, financial condition, or results of operations. Our business also depends on our continuing ability to recruit, train, and retain highly qualified employees, particularly engineering and sales and marketing personnel. The competition for these employees is intense, and the loss of these employees could harm our business. Further, our ability to successfully integrate acquired companies depends in part on our ability to retain key management and existing employees at the time of the acquisition.

Rising labor costs, including due to employee strikes and other labor-related disruptions may materially adversely affect our business, financial condition, and results of operations.

Our business is labor intensive, utilizing large numbers of engineering and manufacturing personnel. There is uncertainty with respect to rising labor costs. Furthermore, labor disputes and strikes based partly on wages have in the past slowed or stopped production by certain manufacturers in China. In some cases, employers have responded by significantly increasing the wages of workers at such plants. Any increase in labor costs due to minimum wage laws or customer requirements about scheduling and overtime that we are unable to recover in our pricing to our customers could materially adversely affect our business, financial condition, and results of operations. In addition, the high turnover rate and our difficulty in recruiting and retaining qualified employees and the other labor trends we are noting in China could result in a potential for defects in our products, production disruptions or delays, or the inability to ramp production to meet increased customer orders, resulting in order cancellation or imposition of customer penalties if we are unable to deliver products in a timely manner.

To respond to competitive pressures and customer requirements, we may further expand internationally in lower-cost locations. If we pursue such expansions, we may be required to make additional capital expenditures. In addition, the cost structure in certain countries that are now considered to be favorable may increase as economies develop or as such countries join multinational economic communities or organizations, causing local wages to rise. As a result, we may need to continue to seek new locations with lower costs and the employee and infrastructure base to support PCB manufacturing. We cannot assure investors that we will realize the anticipated strategic benefits of our international operations or that our international operations will contribute positively to our operating results.

In North America, we are experiencing wage inflation pressures, some of which are mandated by local and state governments. Further, we are experiencing rising health care costs. While we strive to manage these challenges, there can be no assurance that our efforts will succeed which would result in higher costs and lower profits.

Strikes or labor disputes with our unionized employees, primarily in China, may adversely affect our ability to conduct our business. If we are unable to reach agreement with any of our unionized work groups on future negotiations regarding the terms of their collective bargaining agreements, we may be subject to work interruptions or stoppages. Any of these events could be disruptive

22

to our operations and could result in negative publicity, loss of contracts, and a decrease in revenues. We may also become subject to additional collective bargaining agreements in the future if more employees or segments of our workforce become unionized, including any of our employees in the United States.

Infringement of our intellectual property rights could negatively affect us, and we may be exposed to intellectual property infringement claims from third parties that could be costly to defend, could divert management’s attention and resources, and if successful, could result in liability.

We rely on a combination of copyright, patent, trademark, and trade secret laws, confidentiality procedures, contractual provisions, and other measures to establish and protect our proprietary and confidential information. All of these measures afford only limited protection. These measures may be invalidated, circumvented, breached, or challenged, and others may develop intellectual property, technologies or processes that are similar, or superior to, our intellectual property or technology. We may not have adequate controls and procedures in place to protect our proprietary and confidential information. Despite our efforts to protect our intellectual property and proprietary rights, unauthorized parties may attempt to copy, and succeed in copying, our products or may obtain or use information that we regard as proprietary or confidential. If it becomes necessary for us to resort to litigation to protect our intellectual property rights, any proceedings could be burdensome, costly, and distracting to management, and we may not prevail. Further, adequate remedies may not be available in the event of an unauthorized use or disclosure of our proprietary or confidential information. Failure to successfully establish or enforce our intellectual property rights could materially and adversely affect our business, financial condition, and results of operations. Furthermore, there is a risk that we may infringe on the intellectual property rights of others. As is the case with many other companies in the PCB industry, we from time to time receive communications from third parties asserting patent rights over our products and enter into discussions with such third parties. Irrespective of the validity or the successful assertion of such claims, we could incur costs in either defending or settling any intellectual property disputes alleging infringement. If any claims, whether or not they have merit, are brought against our customers for such infringement, we could be required to expend significant resources in defending such claims, developing non-infringing alternatives or obtaining licenses. We may not be successful in developing such alternatives or in obtaining such licenses on reasonable terms, or at all, and may be required to modify or cease marketing our products or services, which could disrupt the production processes, damage our reputation, and materially and adversely affect our business, financial condition, and results of operations.

Foreign laws may not afford us sufficient protections for our intellectual property, and we may not be able to obtain patent protection outside of the United States.

Certain nations that we operate in may not grant us certain intellectual property rights that are customarily granted in more developed legal systems. Patent law reform in the United States and other countries may also weaken our ability to enforce our patent rights or make such enforcement financially unattractive. For example, despite continuing international pressure on the Chinese government, intellectual property rights protection continues to present significant challenges to foreign investors and, increasingly, Chinese companies. Chinese commercial law is relatively undeveloped compared to the commercial law in our other major markets and only limited protection of intellectual property is available in China as a practical matter. Although we have taken precautions in the operations of our Chinese subsidiaries and in our joint venture agreements to protect our intellectual property, any local design or manufacture of products that we undertake in China could subject us to an increased risk that unauthorized parties will be able to copy or otherwise obtain or use our intellectual property, which could harm our business. We may also have limited legal recourse in the event we encounter patent or trademark infringement. Uncertainties with respect to the Chinese legal system may adversely affect the operations of our Chinese subsidiaries. China has put in place a comprehensive system of intellectual property laws; however, incidents of infringement are common, and enforcement of rights can, in practice, be difficult. If we are unable to manage our intellectual property rights, our business and operating results may be seriously harmed.

Damage to our manufacturing facilities due to fire, natural disaster, or other events could materially adversely affect our business, financial condition, and results of operations.

The destruction or closure of any of our facilities for a significant period of time as a result of fire, explosion, blizzard, act of war or terrorism, flood, tornado, earthquake, lightning, other natural disasters, required maintenance, or other events could harm us financially, increasing our costs of doing business and limiting our ability to deliver our manufacturing services on a timely basis.

Our insurance coverage with respect to damages to our facilities or our customers’ products caused by natural disasters is limited and is subject to deductibles and coverage limits. Such coverage may not be adequate or continue to be available at commercially reasonable rates and terms.

In the event one or more of our facilities is closed on a temporary or permanent basis as a result of a natural disaster, required maintenance or other event, our operations could be significantly disrupted. Such events could delay or prevent product manufacturing and shipment for the time required to transfer production or repair, rebuild or replace the affected manufacturing facilities. This time frame could be lengthy and result in significant expenses for repair and related costs. While we have disaster recovery plans in place, there can be no assurance that such plans will be sufficient to allow our operations to continue in the event of every natural or man-made disaster, required repair or other extraordinary event. Any extended inability to continue our operations at unaffected facilities following such an event would reduce our revenue and potentially damage our reputation as a reliable supplier.

23

Risks Related to Our Indebtedness

We have substantial outstanding indebtedness, and our outstanding indebtedness could adversely impact our liquidity and flexibility in obtaining additional financing, our ability to fulfill our debt obligations and our financial condition and results of operations.

We have substantial debt and, as a result, we have significant debt service obligations. We maintain $405.9 million outstanding in a Term Loan Facility due 2024 (Term Loan Facility) at a floating rate of LIBOR plus 2.5%, $375.0 million of Senior Notes due 2025 (Senior Notes) at an interest rate of 5.63%, $40.0 million outstanding under a $150.0 million U.S. Asset-Based Lending Credit Agreement (U.S. ABL), and $30.0 million outstanding under a $150.0 million Asia Asset-Based Lending Credit Agreement (Asia ABL). We and a number of our direct and indirect subsidiaries also have various credit facilities and letters of credit. Such agreements also contain certain financial covenants which require us to maintain, under the occurrence of certain events, a consolidated fixed charge coverage ratio.

Subject to the limits contained in the credit agreements governing the Term Loan Facility, the U.S. ABL, the Asia ABL, the indenture governing the Senior Notes, and our other debt instruments, we may be able to incur substantial additional debt from time to time to finance working capital, capital expenditures, investments or acquisitions, or for other purposes. If we do so, the risks related to our high level of debt could intensify. Specifically, our high level of debt could have important consequences to us and our shareholders. For example, it could:

In addition, the indenture governing the Senior Notes and the credit agreements governing the Term Loan Facility, the U.S. ABL and the Asia ABL contain restrictive covenants that will limit our ability to engage in activities that may be in our long-term best interest. Our failure to comply with those covenants could result in an event of default which, if not cured or waived, could result in the acceleration of all our debt.

Furthermore, we and our subsidiaries may decide to incur significant additional indebtedness in the future. Although the indenture governing the Senior Notes and the credit agreements governing the Term Loan Facility, the U.S. ABL and the Asia ABL will contain restrictions on the incurrence of additional indebtedness, these restrictions are subject to a number of qualifications and exceptions, and the additional indebtedness incurred in compliance with these restrictions could be substantial. These restrictions also will not prevent us from incurring obligations that do not constitute indebtedness.

Servicing our debt requires a significant amount of cash and we may not be able to generate sufficient cash to service all of our debt and may be forced to take other actions to satisfy our obligations under our debt, which may not be successful.

Based on certain parameters defined in the Term Loan Facility, including a First Lien Leverage Ratio, we may be required to make an additional principal payment on an annual basis if our First Lien Leverage Ratio is greater than 2.0.

Our ability to make scheduled payments on or to refinance our debt obligations and to fund planned capital expenditures and expansion efforts depends on our ability to generate cash in the future and our financial condition and operating performance, which are subject to prevailing economic and competitive conditions and to certain regulatory, competitive, financial, business and other factors beyond our control. We cannot assure you that we will maintain a level of cash flows from operating activities sufficient to permit us to pay the principal, premium, if any, and interest on our debt.

If our cash flows and capital resources are insufficient to fund our debt service obligations, we could face substantial liquidity problems and could be forced to reduce or delay investments and capital expenditures or to dispose of material assets or operations,

24

seek additional capital (which could include obtaining additional equity capital on terms that may be onerous or highly dilutive) or restructure or refinance our indebtedness. We may not be able to effect any such alternative measures, if necessary, on commercially reasonable terms or at all and, even if successful, those alternative actions may not allow us to meet our scheduled debt service obligations. The credit agreements governing the Term Loan Facility, the U.S. ABL and the Asia ABL and the indenture governing the Senior Notes will restrict our ability to dispose of assets and use the proceeds from those dispositions and may also restrict our ability to raise debt or equity capital to be used to repay other indebtedness when it becomes due. We may not be able to consummate those dispositions or to obtain proceeds in an amount sufficient to meet any debt service obligations then due.

In addition, we conduct certain of our operations through our subsidiaries. Accordingly, repayment of our indebtedness may be dependent on the generation of cash flow by our subsidiaries and their ability to make such cash available to us, by dividend, debt repayment or otherwise. Unless they are guarantors of the Senior Notes or our other indebtedness, our subsidiaries do not have any obligation to pay amounts due on our indebtedness or to make funds available for that purpose. Our subsidiaries may not be able to, or may not be permitted to, make distributions to enable us to make payments in respect of our indebtedness. Each subsidiary is a distinct legal entity, and under certain circumstances, legal and contractual restrictions may limit our ability to obtain cash from our subsidiaries. While the indenture governing the Senior Notes and the credit agreements governing the Term Loan Facility, the U.S. ABL and the Asia ABL will limit the ability of our subsidiaries to incur consensual restrictions on their ability to pay dividends or make other intercompany payments to us, these limitations are subject to qualifications and exceptions. In the event that we do not receive distributions from our subsidiaries, we may be unable to make required principal and interest payments on our indebtedness.

Our inability to generate sufficient cash flows to satisfy our debt obligations, or to refinance our indebtedness on commercially reasonable terms or at all, would materially and adversely affect our financial position and results of operations and our ability to satisfy our obligations under our indebtedness.

If we cannot make scheduled payments on our debt, we will be in default and holders of the Senior Notes could declare all outstanding principal and interest to be due and payable, the lenders under the Term Loan Facility, the U.S. ABL and the Asia ABL could terminate their commitments to loan money, the lenders could foreclose against the assets securing their borrowings and we could be forced into bankruptcy or liquidation.

Regulatory Risks

We are subject to the requirements of the National Industrial Security Program Operating Manual (NISPOM) for our facility security clearance, which is a prerequisite to our ability to perform on classified contracts for the U.S. government.

A facility security clearance is required in order to be awarded and perform on classified contracts for the Department of Defense and certain other agencies of the U.S. government. As a cleared entity, we must comply with the requirements of the NISPOM, and any other applicable U.S. government industrial security regulations. Further, due to the fact that a portion of our voting equity is owned by a non-U.S. entity, we are required to be governed by and operate in accordance with the terms and requirements of a Special Security Agreement (SSA). The terms of the SSA have been previously disclosed in our SEC filings.

If we were to violate the terms and requirements of the SSA, the NISPOM, or any other applicable U.S. government industrial security regulations (which may apply to us under the terms of classified contracts), we could lose our security clearance. We cannot be certain that we will be able to maintain our security clearance. If for some reason our security clearance is invalidated or terminated, we may not be able to continue to perform on classified contracts and would not be able to enter into new classified contracts, which could materially adversely affect our business, financial condition, and results of operations.

Our operations in China and Hong Kong subject us to risks and uncertainties relating to the laws and regulations of China and Hong Kong.

Under its current leadership, the government of China has been pursuing economic reform policies, including the encouragement of foreign trade and investment. No assurance can be given, however, that the government of China will continue to pursue such policies, that such policies will be successful if pursued, or that such policies will not be significantly altered from time to time, particularly in light of the increasingly tense trade climate with the United States. Despite progress in developing its legal system, China does not have a comprehensive and highly developed system of laws, particularly with respect to foreign investment activities and foreign trade. Enforcement of existing and future laws and contracts is uncertain, and implementation and interpretation thereof may be inconsistent. As the Chinese legal system develops, the promulgation of new laws, changes to existing laws, and the preemption of local regulations by national laws may adversely affect foreign investors. Further, any litigation in China may be protracted and may result in substantial costs and diversion of resources and management’s attention. Also, the evolving landscape of the interrelation between China and Hong Kong may have an adverse impact on our operations in Hong Kong and may impact our ability to attract and maintain necessary talent in that area. In addition, though changes in government policies and rules are timely published or communicated, there is usually no indication of the duration of any grace period before which full implementation and compliance will be required. As a result, it is possible that we might operate our business in violation of new rules and policies before full compliance can be achieved. These uncertainties could limit the legal protections available to us and adversely impact our results of operations.

25

We are subject to risks for the use of certain metals from “conflict minerals” originating in the Democratic Republic of the Congo.

During the third quarter of 2012, the SEC adopted rules implementing the Dodd-Frank Wall Street Reform and Consumer Protection Act (Dodd-Frank). These rules impose diligence and disclosure requirements regarding the use of “conflict minerals” mined from the Democratic Republic of Congo and neighboring countries. While these new rules continue to be the subject of ongoing litigation and, as a result, uncertainty, we submitted a conflict minerals report on Form SD with the SEC for the past seven years, most recently on May 29, 2020. Compliance with these rules results in additional costs and expenses, including costs and expenses incurred for due diligence to determine and verify the sources of any conflict minerals used in our products, in addition to the costs and expenses of remediation and other changes to products, processes, or sources of supply as a consequence of such verification efforts. These rules may also affect the sourcing and availability of minerals used in the manufacture of our PCBs, as there may be only a limited number of suppliers offering “conflict free” minerals that can be used in our products. There can be no assurance that we will be able to obtain such minerals in sufficient quantities or at competitive prices. Also, since our supply chain is complex, we may, at a minimum, face reputational challenges with our customers, stockholders, and other stakeholders if we are unable to sufficiently verify the origins of the minerals used in our products. We may also encounter customers who require that all of the components of our products be certified as conflict free. If we are not able to meet customer requirements, such customers may choose to disqualify us as a supplier, which could impact our sales and the value of portions of our inventory.

Our failure to comply with the requirements of environmental laws could result in litigation, fines, revocation of permits necessary to our manufacturing processes, or debarment from our participation in federal government contracts.

Our operations are regulated under a number of domestic and foreign environmental and safety laws and regulations that govern, among other things, the discharge of hazardous materials into the air and water, as well as the handling, storage, recycling, and disposal of such materials. These laws and regulations include the Clean Air Act, the Clean Water Act, the Resource Conservation and Recovery Act, the Superfund Amendment and Reauthorization Act, the Comprehensive Environmental Response, Compensation and Liability Act, the Toxic Substances Control Act, and the Federal Motor Carrier Safety Improvement Act, as well as analogous state, local, and foreign laws. Compliance with these environmental laws is a major consideration for us because our manufacturing processes use and generate materials classified as hazardous. Because we use hazardous materials and generate hazardous wastes in our manufacturing processes, we may be subject to potential financial liability for costs associated with the investigation and remediation of our own sites, or sites at which we have arranged for the disposal of hazardous wastes, if such sites become contaminated. Even if we fully comply with applicable environmental laws and are not directly at fault for the contamination, we may still be liable. The wastes we generate include spent ammoniacal and cupric etching solutions, metal stripping solutions, waste acid solutions, waste alkaline cleaners, waste oil, and waste waters that contain heavy metals such as copper, tin, lead, nickel, gold, silver, cyanide, and fluoride, and both filter cake and spent ion exchange resins from equipment used for on-site waste treatment.

Environmental law violations, including the failure to maintain required environmental permits, could subject us to fines, penalties, and other sanctions, including the revocation of our effluent discharge permits. This could require us to cease or limit production at one or more of our facilities and could have a material adverse effect on our business, financial condition, and results of operations. Even if we ultimately prevail, environmental lawsuits against us would be time consuming and costly to defend.

Environmental laws have generally become more stringent and we expect this trend to continue over time, especially in developing countries, imposing greater compliance costs and increasing risks and penalties associated with violation. We operate in environmentally sensitive locations, and we are subject to potentially conflicting and changing regulatory agendas of political, business, and environmental groups. Changes or restrictions on discharge limits, emissions levels, material storage, handling, or disposal might require a high level of unplanned capital investment or relocation to another global location where prohibitive regulations do not exist. It is possible that environmental compliance costs and penalties from new or existing regulations may materially adversely affect our business, financial condition, and results of operations.

We are increasingly required to certify compliance with various material content restrictions in our products based on laws of various jurisdictions or territories such as the Restriction of Hazardous Substances (RoHS) and Registration, Evaluation, Authorization and Restriction of Chemicals, or REACH directives in the European Union and China’s RoHS legislation. Similar laws have been adopted in other jurisdictions and may become increasingly prevalent. In addition, we must also certify as to the non-applicability of the EU’s Waste Electrical and Electronic Equipment directive for certain products that we manufacture. The REACH directive requires the identification of Substances of Very High Concern, or SVHCs periodically. We must survey our supply chain and certify to the non-presence or presence of SVHCs to our customers. As with other types of product certifications that we routinely provide, we may incur liability and pay damages if our products do not conform to our certifications.

We are also subject to an increasing variety of environmental laws and regulations in China, which impose limitations on the discharge of pollutants into the air and water and establish standards for the treatment, storage, and disposal of solid and hazardous wastes for us and our vendors that assist us in managing the waste generated by our manufacturing processes. The manufacturing of our products generates gaseous chemical wastes, liquid wastes, waste water, and other industrial wastes from various stages of the manufacturing process. Production sites, waste collectors, and vendors in China are subject to increasing regulation and periodic monitoring by the relevant environmental protection authorities. Environmental claims or the failure to comply with current or future

26

regulations could result in the assessment of damages or imposition of fines against us, suspension of production, or cessation of operations.

The process to manufacture PCBs requires adherence to city, county, state, federal, and foreign environmental laws and regulations regarding the storage, use, handling, and disposal of chemicals, solid wastes, and other hazardous materials, as well as compliance with wastewater and air quality standards. We rely on our vendors for the transportation and disposal of our solid and hazardous wastes generated by our manufacturing processes. If we are not able to find such services, our ability to conduct our business and our results of operations may be adversely impacted. In China, the government has a history of changing legal requirements with no or minimal notice. We believe that our facilities in China comply in all material respects with current applicable environmental laws and regulations and have resources in place to maintain compliance to them. The capital expenditure costs expected for environmental improvement initiatives are included in our annual capital expenditure projections.

Our international sales are subject to laws and regulations relating to corrupt practices, trade, and export controls and economic sanctions. Any non-compliance could have a material adverse effect on our business, financial condition, and results of operations.

We operate on a global basis and are subject to anti-corruption, anti-bribery, and anti-kickback laws and regulations, including restrictions imposed by the Foreign Corrupt Practices Act (FCPA). The FCPA and similar anti-corruption, anti-bribery, and anti-kickback laws in other jurisdictions generally prohibit companies and their intermediaries and agents from making improper payments to government officials or any other persons for the purpose of obtaining or retaining business. We operate and sell our products in many parts of the world that have experienced governmental corruption to some degree and, in certain circumstances, strict compliance with anti-corruption, anti-bribery, and anti-kickback laws may conflict with local customs and practices. We also, from time to time, undertake business ventures with state-owned companies or enterprises.

Our global business operations must also comply with all applicable domestic and foreign export control laws, including International Traffic In Arms Regulations (ITAR) and Export Administration Regulations (EAR). Some items we manufacture are controlled for export by the U.S. Department of Commerce’s Bureau of Industry and Security under EAR.

We train our employees concerning anti-corruption, anti-bribery, and anti-kickback laws and compliance with international regulations regarding trades and exports, and we have policies in place that prohibit employees from making improper payments. We cannot provide assurances that our internal controls and procedures will guarantee compliance by our employees or third parties with whom we work. If we are found to be liable for violations of the FCPA or similar anti-corruption, anti-bribery, or anti-kickback laws in international jurisdictions or for violations of ITAR, EAR, or other similar regulations regarding trades and exports, either due to our own acts or out of inadvertence, or due to the inadvertence of others, we could suffer criminal or civil fines or penalties or other repercussions, including reputational harm, which could have a material adverse effect on our business, financial condition, and results of operations.

Our global business operations also must be conducted in compliance with applicable economic sanctions laws and regulations, such as laws administered by the U.S. Department of the Treasury’s Office of Foreign Asset Control, the U.S. State Department, and the U.S. Department of Commerce. We must comply with all applicable economic sanctions laws and regulations of the United States and other countries. Imposition of economic sanction laws and regulations on a company or country could impact our revenue levels. Violations of these laws or regulations could result in significant additional sanctions including criminal or civil fines or penalties, more onerous compliance requirements, more extensive debarments from export privileges, or loss of authorizations needed to conduct aspects of our international business.

In certain countries, we may engage third-party agents or intermediaries, such as customs agents, to act on our behalf, and if these third-party agents or intermediaries violate applicable laws, their actions may result in criminal or civil fines or penalties or other sanctions being assessed against us. We take specific measures designed to ensure our compliance with U.S. export and economic sanctions laws, anti-corruption laws and regulations, and export control laws. However, it is possible that some of our products were sold or will be sold to distributors or other parties, without our knowledge or consent, in violation of applicable law. There can be no assurances that we will be in compliance in the future. Any such violation could result in significant criminal or civil fines, penalties, or other sanctions and repercussions, including reputational harm, which could have a material adverse effect on our business, financial condition, and results of operations.

Other Risks

We may need additional capital in the future to fund investments in our operations, refinance our indebtedness, and to maintain and grow our business, and such capital may not be available on a timely basis, on acceptable terms, or at all.

Our business is capital-intensive, and our ability to increase revenue, profit, and cash flow depends upon continued capital spending. To the extent that the funds generated by our ongoing operations are insufficient to cover our liquidity requirements, we may need to raise additional funds through financings. If we are unable to fund our operations and make capital expenditures as currently planned or if we do not have sufficient liquidity to service the interest and principal payments on our debt, it would have a material adverse effect on our business, financial condition, and results of operations. If we do not achieve our expected operating results, we would need to reallocate our sources and uses of operating cash flows. This may include borrowing additional funds to

27

service debt payments, which may impair our ability to make investments in our business. Looking ahead at long-term needs, we may need to raise additional funds for a number of purposes, including the following:

Should we need to raise funds through incurring additional debt, we may become subject to covenants even more restrictive than those contained in our current debt instruments. There can be no assurance that additional capital, including any future equity or debt financing, would be available on a timely basis, on favorable terms, or at all. If such funds are not available to us when required or on acceptable terms, our business, financial condition, and results of operations could be materially adversely affected.

Outages, computer viruses, break-ins, and similar events could disrupt our operations, and breaches of our security systems may cause us to incur significant legal and financial exposure.

We rely on information technology networks and systems, some of which are owned and operated by third parties, to collect, process, transmit, and store electronic information. In particular, we depend on our information technology infrastructure for a variety of functions, including worldwide financial reporting, inventory management, procurement, invoicing, and email communications. Any of these systems may be susceptible to outages due to fire, floods, power loss, telecommunications failures, hacking, terrorist attacks, and similar events. In addition, in the ordinary course of our business, we collect and store sensitive data in our data centers and on our networks, including intellectual property, our proprietary and confidential business information and that of our customers, suppliers and business partners, and personally identifiable information of our employees. The secure collection, processing, storage, maintenance and transmission of this information is critical to our operations. Despite the implementation of network security measures, our systems and those of third parties on which we rely may also be vulnerable to computer viruses, break-ins, cyber-attacks, attacks by hackers or breaches due to employee or third party (including suppliers and business partners) error, malfeasance or other disruptions. If we or our vendors are unable to prevent such outages and breaches, our operations could be disrupted. If unauthorized parties gain access to our information systems or such information is used in an unauthorized manner, misdirected, altered, lost, or stolen during transmission, any theft or misuse of such information could result in, among other things, unfavorable publicity, governmental inquiry and oversight, difficulty in marketing our services, allegations by our customers that we have not performed our contractual obligations, loss of customers, litigation by affected parties, and possible financial obligations for damages related to the theft or misuse of such information, any of which could have a material adverse effect on our business, financial condition, and results of operations.

Issues arising during the upgrade of our enterprise resource planning system could affect our operating results and ability to manage our business effectively.

We are continuing the process of upgrading our enterprise resource planning, or ERP, management system to enhance operating efficiencies and provide more effective management of our business operations. We are investing significant financial and personnel resources into this project. However, there is no assurance that the system upgrade will meet our current or future business needs or that it will operate as designed. The transition to the new ERP system will affect numerous systems necessary for our operation. If we fail to correctly implement one or more components of the ERP system, we could experience significant disruption to our operations. Such disruptions could include, among other things, temporary loss of data, inability to process certain orders, failure of systems to communicate with each other and the inability to track or reconcile key data. We are heavily dependent on automated management systems, and any significant failure or delay in the system upgrade could cause a substantial interruption to our business and additional expense, which could result in an adverse impact on our operating results, cash flows or financial condition.

Our ability to use net operating loss carryforwards to offset future taxable income for U.S. federal, state and foreign income tax purposes is subject to limitations, and future transfers of shares of our common stock could cause us to experience an “ownership change” that could further limit our ability to utilize our net operating losses.

Under U.S. federal income tax law, a corporation’s ability to utilize its net operating losses (NOL’s) to offset future taxable income may be significantly limited if it experiences an “ownership change” as defined in Section 382 of the Internal Revenue Code of 1986, as amended. In general, an ownership change will occur if there is a cumulative change in a corporation’s ownership by “5-percent shareholders” that exceeds 50 percentage points over a rolling three-year period.

28

A corporation that experiences an ownership change will generally be subject to an annual limitation on its pre-ownership change NOLs equal to the value of the corporation immediately before the ownership change, multiplied by the long-term tax-exempt rate (subject to certain adjustments). The annual limitation for a taxable year is generally increased by the amount of any “recognized built-in gains” for such year and the amount of any unused annual limitation in a prior year. As a result of our acquisition of Viasystems, the NOLs acquired were subject to this limitation. Future transfers or sales of our common stock during a rolling three-year period by any of our “5-percent shareholders” could cause us to experience an ownership change under Section 382, which could further limit our use of NOL.

If our net earnings do not remain at or above recent levels, or we are not able to predict with a reasonable degree of probability that they will continue, we may have to record a valuation allowance against our net deferred income tax assets.

Our U.S. entities and certain of our foreign subsidiaries have deferred income tax assets. Based on our forecast for future taxable earnings, we believe we will utilize the deferred income tax assets in future periods except with respect to certain amounts where we have recorded valuation allowances. If our estimates of future earnings decline, we may have to increase our valuation allowance against our net deferred income tax assets, resulting in a higher income tax provision, which would reduce our results of operations.

Unanticipated changes in our tax rates or in our assessment of the realizability of our deferred income tax assets or exposure to additional income tax liabilities could affect our business, financial condition, and results of operations.

We are subject to income taxes in the United States and various foreign jurisdictions. Significant judgment is required in determining our provision for income taxes and, in the ordinary course of business, there are many transactions and calculations in which the ultimate tax determination is uncertain. Our effective tax rates could be materially adversely affected by changes in the mix of earnings in countries and states with differing statutory tax rates, changes in the valuation of deferred income tax assets and liabilities, changes in tax laws, as well as other factors. Our tax determinations are regularly subject to audit by tax authorities, and developments in those audits could adversely affect our income tax provision. Although we believe that our tax estimates are reasonable, the final determination of tax audits or tax disputes may be different from what is reflected in our historical income tax provisions, which could materially adversely affect our business, financial condition, and results of operations.

None.

29

The following table describes our headquarters and our principal manufacturing facilities.

We maintain our properties in good operating condition. We believe that our properties are suitable and adequate for us to operate at present levels, and the productive capacity and extent of utilization of the facilities are appropriate for our existing manufacturing requirements.

From time to time, we may become a party to various legal proceedings arising in the ordinary course of our business. There can be no assurance that we will prevail in any such litigation. We believe that the amount of any reasonably possible or probable loss for known matters would not be material to our financial statements; however, the outcome of these actions is inherently difficult to predict. In the event of an adverse outcome, the ultimate potential loss could have a material adverse effect on our financial condition, results of operations, or cash flows in a particular period.

30

Not applicable.

31

PART II

Market Information

Our common stock has been listed on the Nasdaq Global Select Market under the symbol “TTMI” since September 21, 2000.

As of February 17, 2021, there were approximately 281 holders of record of our common stock. The closing sale price of our common stock on the Nasdaq Global Select Market on February 17, 2021 was $14.33.

STOCK PRICE PERFORMANCE GRAPH

The performance graph below compares, for the period from December 28, 2015 to December 28, 2020, the cumulative total stockholder return on our common stock against the cumulative total return of:

The graph assumes $100 was invested in our common stock on December 28, 2015, and an investment in NASDAQ Composite Index and the Dow Jones US Electrical Components & Equipment Index. The stock performance shown on the graph below represents historical stock performance and is not necessarily indicative of future stock performance.

COMPARISON OF 5 YEAR CUMULATIVE TOTAL RETURN*

Among TTM Technologies, Inc., the NASDAQ Composite Index

and the Dow Jones US Electrical Components & Equipment Index

The performance graph above shall not be deemed “filed” for purposes of Section 18 of the Exchange Act, or otherwise subject to the liability of that section. The performance graph above will not be deemed incorporated by reference into any filing of our company under the Securities Act of 1933, as amended, or the Exchange Act.

Dividends

We have never declared or paid cash dividends on our common stock. We currently expect to retain future earnings for use in capital expenditures, for acquisitions, fund working capital requirements, repay existing debt, and potentially for share repurchases

32

and do not anticipate paying cash dividends in the foreseeable future. Additionally, our ability to pay dividends is limited pursuant to covenants contained in our various debt agreements.

Omitted pursuant to our election to apply rules adopted by the SEC effective February 10, 2021 to eliminate Item 301 of Regulation S-K.

33