November 8, 2010 - 10-Q: Quarterly report pursuant to Section 13 or 15(d)

UNITED STATES
SECURITIES AND EXCHANGE COMMISSION

Washington, DC 20549

Form 10-Q


þ		QUARTERLY REPORT UNDER SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the quarterly period ended September 27, 2010

Commission File Number: 0-31285

TTM TECHNOLOGIES, INC.

(Exact name of registrant as specified in its charter)


DELAWARE (State or other jurisdiction of incorporation or organization)		91-1033443 (I.R.S. Employer Identification No.)

2630 South Harbor Boulevard, Santa Ana, California 92704
(Address of principal executive offices)

(714) 327-3000
(Registrants telephone number, including area code)

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes þ No o

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files). Yes o No o

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company. See the definitions of large accelerated filer, accelerated filer and smaller reporting company in Rule 12b-2 of the Exchange Act. (Check one):


Large accelerated filer o		Accelerated filer þ		Non-accelerated filer o (Do not check if a smaller reporting company)		Smaller reporting company o

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Act). Yes o No þ

Number of shares of common stock, $0.001 par value, of registrant outstanding at November 3, 2010: 80,070,669

TABLE OF CONTENTS


	Page
PART I: FINANCIAL INFORMATION
Item 1. Financial Statements (unaudited)
Consolidated Condensed Balance Sheets as of September 27, 2010 and December 31, 2009		3
Consolidated Condensed Statements of Operations for the quarter and three quarters ended September 27, 2010 and September 28, 2009		4
Consolidated Condensed Statements of Cash Flows for the three quarters ended September 27, 2010 and September 28, 2009		5
Notes to Consolidated Condensed Financial Statements		7
Item 2. Managements Discussion and Analysis of Financial Condition and Results of Operations		30
Item 3. Quantitative and Qualitative Disclosures About Market Risk		42
Item 4. Controls and Procedures		44
PART II: OTHER INFORMATION
Item 1. Legal Proceedings		45
Item 1A. Risk Factors		46
Item 2. Unregistered Sales of Equity Securities and Use of Proceeds		46
Item 6. Exhibits		46
SIGNATURES		47
EX-31.1
EX-31.2
EX-32.1
EX-32.2

TTM TECHNOLOGIES, INC.

Consolidated Condensed Balance Sheets
As of September 27, 2010 and December 31, 2009


	September 27,		December 31,
	2010		2009
	(Unaudited)
	(In thousands)
ASSETS
Current assets:
Cash and cash equivalents	$	164,230	$	94,347
Short-term investments				1,351
Restricted cash				120,000
Accounts and notes receivable, net of allowances of $6,440 in 2010 and $3,651 in 2009		299,786		89,519
Inventories		133,399		60,153
Prepaid expenses and other current assets		23,156		2,669
Assets held for sale		4,249		7,875
Deferred income taxes		6,645		6,645
Foreign deferred income taxes		2,075

Total current assets		633,540		382,559
Property, plant and equipment, net of accumulated depreciation of $119,795 in 2010 and $108,118 in 2009		701,549		88,577
Debt issuance costs, net		5,485		3,542
Deferred income taxes		28,983		37,430
Goodwill		200,208		14,130
Definite-lived intangibles, net		93,613		15,111
Deposits and other non-current assets		32,575		1,709

	$	1,695,953	$	543,058

LIABILITIES AND EQUITY
Current liabilities:
Current portion of long-term debt	$	66,944	$
Accounts payable		151,602		37,867
Accounts payable due to related parties		51,610
Accrued salaries, wages and benefits		44,337		19,253
Equipment payable		61,249
Other accrued expenses		29,651		2,327

Total current liabilities		405,393		59,447

Convertible senior notes, net of discount		143,890		139,882
Long-term debt, net of discount		312,859
Foreign deferred income taxes		12,129
Related party financing obligation		20,230
Other long-term liabilities		16,041		2,812

Total long-term liabilities		505,149		142,694

Commitments and contingencies (Note 14)
Equity:
TTM Technologies, Inc. stockholders equity
Common stock, $0.001 par value; 100,000 shares authorized, 80,059 and 43,181 shares issued and outstanding in 2010 and 2009, respectively		80		43
Additional paid-in capital		514,907		215,461
Retained earnings		160,788		122,283
Accumulated other comprehensive income		8,442		3,130

Total TTM Technologies, Inc. stockholders equity		684,217		340,917
Noncontrolling interest		101,194

Total equity		785,411		340,917

	$	1,695,953	$	543,058

See accompanying notes to consolidated condensed financial statements.

TTM TECHNOLOGIES, INC.

Consolidated Condensed Statements of Operations
For the Quarter and Three Quarters Ended September 27, 2010 and September 28, 2009
(Unaudited)
(In thousands, except per share data)


	Quarter Ended						Three Quarters Ended
	September 27,			September 28,			September 27,			September 28,
	2010			2009			2010			2009
Net sales	$	357,813		$	139,075		$	806,280		$	432,552
Cost of goods sold		277,478			114,868			641,878			357,017

Gross profit		80,335			24,207			164,402			75,535

Operating expenses:
Selling and marketing		9,055			6,546			24,885			20,037
General and administrative		21,922			9,403			56,308			25,460
Amortization of definite-lived intangibles		3,653			860			9,065			2,580
Restructuring charges					2,501			449			5,009
Impairment of long-lived assets					10,293			766			10,636

Total operating expenses		34,630			29,603			91,473			63,722

Operating income (loss)		45,705			(5,396	)		72,929			11,813

Other income (expense):
Interest expense		(6,690	)		(2,919	)		(15,882	)		(8,396	)
Interest income		164			196			360			356
Other, net		2,405			57			2,382			96

Total other expense, net		(4,121	)		(2,666	)		(13,140	)		(7,944	)

Income (loss) before income taxes		41,584			(8,062	)		59,789			3,869
Income tax (provision) benefit		(9,439	)		3,177			(16,419	)		(1,379	)

Net income (loss)		32,145			(4,885	)		43,370			2,490
Less: Net income attributable to the noncontrolling interest		(3,054	)					(4,865	)

Net income (loss) attributable to TTM Technologies, Inc. stockholders	$	29,091		$	(4,885	)	$	38,505		$	2,490


Earnings (loss) per share attributable to TTM Technologies, Inc. stockholders:
Basic earnings (loss) per share	$	0.36		$	(0.11	)	$	0.58		$	0.06

Diluted earnings (loss) per share	$	0.36		$	(0.11	)	$	0.57		$	0.06

See accompanying notes to consolidated condensed financial statements.

TTM TECHNOLOGIES, INC.

Consolidated Condensed Statements of Cash Flows
For the Three Quarters Ended September 27, 2010 and September 28, 2009


	Three Quarters Ended
	September 27,			September 28,
	2010			2009
	(Unaudited)
	(In thousands)
Cash flows from operating activities:
Net income	$	43,370		$	2,490
Adjustments to reconcile net income to net cash provided by operating activities:
Depreciation of property, plant and equipment		32,113			14,491
Amortization of definite-lived intangible assets		9,152			2,678
Amortization of convertible notes, debt discount and debt issuance costs		4,947			4,059
Non-cash interest imputed on other long-term liabilities and related party financing obligation		698			112
Income tax benefit from restricted stock units released and common stock options exercised		(436	)		(17	)
Deferred income taxes		6,796			(1,078	)
Stock-based compensation		4,660			4,698
Impairment of long-lived assets		766			10,636
Net loss on sale of property, plant and equipment		291			84
Net unrealized loss on derivative assets and liabilities		300
Net unrealized foreign currency exchange loss		263
Changes in operating assets and liabilities, net of acquisition:
Accounts and notes receivable, net		(78,001	)		19,292
Inventories		(6,962	)		9,273
Prepaid expenses and other current assets		(9,199	)		154
Accounts payable		4,051			(12,294	)
Accrued salaries, wages and benefits and other accrued expenses		23,763			2,717

Net cash provided by operating activities		36,572			57,295

Cash flows from investing activities:
Acquisition, net of cash acquired		(28,529	)
Restricted cash released to cash and cash equivalents		120,000
Purchase of property, plant and equipment and equipment deposits		(25,178	)		(9,301	)
Proceeds from sale of property, plant and equipment and assets held for sale		4,351			663
Purchase of license agreement					(350	)
Proceeds from redemption of short-term investments		1,351			2,238

Net cash provided by (used in) investing activities		71,995			(6,750	)

Cash flows from financing activities:
Repayment of assumed long-term debt in acquisition		(387,980	)
Proceeds from new long-term borrowings		387,980
Net repayments of revolving loan		(37,987	)
Proceeds from exercise of common stock options		197			297
Excess income tax benefit from restricted stock units released and common stock options exercised		436			17

Net cash (used in) provided by financing activities		(37,354	)		314

Effect of foreign currency exchange rates on cash and cash equivalents		(1,330	)		(6	)

Net increase in cash and cash equivalents		69,883			50,853
Cash and cash equivalents at beginning of period		94,347			148,465

Cash and cash equivalents at end of period	$	164,230		$	199,318

Supplemental cash flow information:
Cash paid for income taxes	$	11,157		$	3,331
Cash paid for interest		9,204			2,855

Supplemental disclosures of non-cash investing and financing activities:

The Company issued common stock and replacement awards with a fair value of $294,382 in connection with the PCB Subsidiaries acquisition, (as defined in the accompanying notes.) See Note 2.

As of September 27, 2010 and September 28, 2009, accrued purchases of equipment totaled $70,799 and $272, respectively.

During the three quarters ended September 28, 2009, the Company commenced the process of selling the building at its Redmond, Washington production facility and as a result classified such assets to assets held for sale. See Note 9.

See accompanying notes to consolidated condensed financial statements.

TTM TECHNOLOGIES, INC.

Notes to Consolidated Condensed Financial Statements
(unaudited)
(Dollars and shares in thousands, except per share data)

(1) Nature of Operations and Basis of Presentation

TTM Technologies, Inc. (the Company or TTM) is a world-wide manufacturer of complex printed circuit boards (PCBs) used in sophisticated electronic equipment and provides backplane and sub-system assembly services for both standard and specialty products in defense and commercial operations. The Company sells to a variety of customers located both within and outside of the United States of America. The Companys customers include both original equipment manufacturers (OEMs) and electronic manufacturing services (EMS) companies. The Companys OEM customers often direct a significant portion of their purchases through EMS companies.

The accompanying consolidated condensed financial statements have been prepared by the Company, without audit, pursuant to the rules and regulations of the Securities and Exchange Commission (SEC). Certain information and disclosures normally included in financial statements prepared in accordance with accounting principles generally accepted in the United States of America have been condensed or omitted pursuant to such rules and regulations. These consolidated condensed financial statements reflect all adjustments (consisting only of normal recurring adjustments) which, in the opinion of management, are necessary to present fairly the financial position, the results of operations and cash flows of the Company for the periods presented. It is suggested that these consolidated condensed financial statements be read in conjunction with the consolidated financial statements and the notes thereto included in the Companys most recent Annual Report on Form 10-K. The results of operations for the interim periods are not necessarily indicative of the results to be expected for the full year. The preparation of financial statements in accordance with U.S. generally accepted accounting principles requires management to make estimates and assumptions that affect the amounts reported in the Companys consolidated condensed financial statements and accompanying notes. Actual results could differ materially from those estimates. The Company uses a 13-week fiscal quarter accounting period with the first quarter ending on the Monday closest to April 1 and the fourth quarter always ending on December 31. The third quarters ended September 27, 2010 and September 28, 2009 each contained 91 days. The three quarters ended September 27, 2010 and September 28, 2009 contained 270 and 271 days, respectively.

(2) Acquisition of PCB Subsidiaries

On the evening of April 8, 2010 (in the morning of April 9, 2010. Hong Kong time), the Company acquired from Meadville Holdings Limited (Meadville), an exempted company incorporated under the laws of the Cayman Islands, and MTG Investment (BVI) Limited (MTG), a company incorporated under the laws of the British Virgin Islands and a wholly owned subsidiary of Meadville, all of the issued and outstanding capital stock of four wholly owned subsidiaries of MTG. These four companies, through their respective subsidiaries, engage in the business of manufacturing and distributing printed circuit boards, including circuit design, quick-turn-around services, and drilling and routing services. Subsequent to the acquisition, these four companies and their subsidiaries (together, the PCB Subsidiaries) are subsidiaries of the Company and represent the Asia Pacific operating segment of the Company.

The Company purchased the PCB Subsidiaries for a total consideration of $114,034 in cash and 36,334 shares of TTM common stock, of which approximately 26,225 are subject to restrictions. After taking into account the 36,334 shares of TTM common stock issued in the acquisition and based on the number of shares outstanding on April 8, 2010, the date the Company acquired the PCB Subsidiaries, approximately 46% of TTM common stock outstanding was held by Meadville, its shareholders, or their transferees.

Bank fees and legal and accounting costs associated with the acquisition of the PCB Subsidiaries of $428 and $9,212 for the quarter and three quarters ended September 27, 2010, have been expensed and recorded as general and administrative expense in the consolidated condensed statement of operations in accordance with ASC Topic 805, Business Combinations.

As part of the consideration for the purchase of all of the outstanding capital stock of the PCB Subsidiaries as described above, the Company was required to maintain approximately $120,000 in cash and cash equivalents in various accounts, which were restricted in nature and therefore recorded as restricted cash in the consolidated balance sheet as of December 31, 2009.

TTM TECHNOLOGIES, INC.

Notes to Consolidated Financial Statements (Continued)

The following summarizes the components of the PCB Subsidiaries purchase price:


	(In thousands)
Value of TTM shares issued:
TTM shares issued with restrictions	$	201,959
TTM shares issued without restrictions		89,965
Foreign employee replacement share awards		2,458

		294,382
Cash consideration		114,034

Total	$	408,416

The value of the shares of the Companys common stock used in determining the purchase price was $9.06 per share, the closing price of the Companys common stock on April 8, 2010, the effective date of the acquisition. Additionally, approximately 26,225 of the Companys shares issued and subsequently distributed to the principal shareholders in the acquisition of the PCB Subsidiaries maintain certain restrictions, including a lock-up transfer restriction during the 18-month period following the closing of the acquisition of the PCB Subsidiaries and therefore, the fair value of these shares has been determined considering the restrictions, resulting in a discount of 15% from the closing share price.

The foreign employee share awards were transferred to certain employees involved in the PCB Subsidiaries business by a related party and controlling shareholder of the PCB Subsidiaries. The fair value of the share awards included as purchase consideration was determined using a $9.06 per share price plus cash prorated for the pre-combination service period. See Note 16.

The purchase price of the PCB Subsidiaries was allocated to tangible and intangible assets acquired, liabilities assumed and noncontrolling interests based on their estimated fair value at the date of the acquisition (April 8, 2010). The excess of the purchase price over the fair value of net assets acquired and noncontrolling interests was allocated to goodwill.

The fair values assigned are based on reasonable methods applicable to the nature of the assets acquired, liabilities assumed and noncontrolling interests. The following summarizes the preliminary estimated fair values of net assets acquired and noncontrolling interests:


	(In thousands)
Cash	$	85,505
Trade and notes receivables ($139,398 contractual gross receivables)		131,844
Inventories		66,150
Other current assets		12,762
Property, plant, and equipment		576,454
Identifiable intangible assets		87,565
Goodwill		185,623
Other assets		13,013
Current liabilities		(196,866	)
Long-term debt, net of discount		(417,414	)
Related party financing obligation		(19,381	)
Other liabilities		(21,945	)
Noncontrolling interest		(94,894	)

Total	$	408,416

During the third quarter ended September 27, 2010, certain equipment payables approximating $7,936 were reclassified to current liabilities due to the short-term nature of these obligations.

Due to the fact that the acquisition of the PCB Subsidiaries occurred in the previous interim period, the magnitude of the transaction, and because significant information to be obtained and analyzed resides in a foreign jurisdiction, the Company's fair value estimates for the purchase price allocation are preliminary and may change during the allowable measurement period, which is up to the point the Company obtains and analyzes the information that existed as of the date of the acquisition necessary to determine the fair values, but in no case to exceed more than one year from the date of acquisition. As of September 27, 2010, the fair values of property, plant and equipment and noncontrolling interests are preliminary as the Company continues to accumulate and analyze information necessary to finalize the fair values.

TTM TECHNOLOGIES, INC.

Notes to Consolidated Financial Statements (Continued)

Equipment payables

Equipment payables represent equipment purchases, some with extended payment terms. Equipment purchases, some with payment terms less than one year are reported as Equipment payables in the consolidated condensed balance sheet and those with payment terms greater than one year are included in Other long-term liabilities in the consolidated condensed balance sheet.

Property, plant and equipment

The fair value of property, plant and equipment was determined by utilizing three approaches: the cost, sales comparison, and income capitalization approaches combined with management assumptions. Each approach assumes valuation of the property at the propertys highest and best use.

Long-term debt, net of discount

On the acquisition date, the Company became a party to the PCB Subsidiaries November 16, 2009 Credit Agreement with various lenders. The credit agreement was put in place in contemplation of the acquisition in order to refinance existing credit facilities consisting of a term and revolving loan and factoring and letter of credit facilities. The amount drawn under this credit agreement to refinance and extinguish the existing credit facilities was approximately $388,000 after the completion of the acquisition of the PCB Subsidiaries. The fair value of existing debt assumed was based on its contractual provisions that required it to be repaid upon a change in control.

Additionally, certain bank loans maintained by the PCB Subsidiaries within the Peoples Republic of China (PRC) were kept in place after the Companys completion of the acquisition of the PCB Subsidiaries. The amount drawn under these lines as of the acquisition date amounted to approximately $30,000. The Company determined the fair value of the assumed debt using a present value analysis based on market rates of LIBOR plus spread for the debt.

Related party financing obligation

The related party financing obligation consists of a put and call option agreement which grants the noncontrolling interest a put option to sell, and to one of the PCB Subsidiaries a call option to purchase, the remaining 20% equity interest in one of its majority owned subsidiaries. The exercise price of the put option is the greater of (i) an enterprise value calculation, which uses earnings before income taxes, depreciation and amortization projections on the extrapolation of the latest unaudited combined financial results of the majority owned subsidiary to a four-year period and an enterprise value of 5.5 times, or (ii) the net asset value based on the extrapolation of the latest unaudited combined financial results of the majority owned subsidiary as at end of the fiscal year 2012; or (iii) the minimum price of approximately 15,384 EUR plus interest which will accrue at a rate of 2.5% compounded annually until the option is exercised. Fair value as of the acquisition date of the financial liability was based upon the minimum price as the other two scenarios were determined to be nonsubstantive due to the challenging current and expected future operations of the subsidiary. As the minimum price represents a fixed obligation, the noncontrolling interest was accounted for as a financing obligation rather than a noncontrolling interest and 100% of the subsidiary is consolidated. The fair value of the related party financial liability was estimated based on the minimum price of the obligation plus 2.5% interest discounted at the liabilitys discount rate based on the Companys adjusted cost of borrowing as of the acquisition date.

Noncontrolling Interest

Noncontrolling interests consist of a 29.8% equity interest in one PCB manufacturing subsidiary and a 20.0% equity interest in one other PCB manufacturing subsidiary held by third parties. The fair value was determined by utilizing a combination of income and market comparable approaches. The income approach was used to estimate the total enterprise value of each noncontrolling interest by estimating discounted future cash flows. The market comparable approach indicates the fair value of the noncontrolling interest based on a comparison to comparable enterprises in similar lines of business that are publicly traded or are part of a public or private transaction.

TTM TECHNOLOGIES, INC.

Notes to Consolidated Financial Statements (Continued)

Identifiable Intangible Assets

Acquired identifiable intangible assets include customer relationships, trade name and order backlog. The fair value of the identifiable intangible assets was determined using various income approach methods, including excess earnings and relief from royalties, as appropriate to determine the present value of expected future cash flows for each identifiable intangible asset based on discount rates which incorporate a risk premium to take into account the risks inherent in those expected cash flows. The expected cash flows were estimated using available historical data adjusted based on the Companys historical experience and the expectations of market participants. The amounts assigned to each class of intangible assets and the related weighted average amortization periods are as follows:


	Intangible asset		Weighted-average
	acquired		amortization period
	(In thousands)
Customer relationships	$	75,975	8.0 years
Trade name		10,302	6.0 years
Order backlog		1,288	0.2 years

	$	87,565

Goodwill

Goodwill represents the excess of the PCB Subsidiaries purchase price over the fair value of assets acquired, liabilities assumed and noncontrolling interests. During the quarter ended September 27, 2010, goodwill was adjusted to reflect:

a decrease in fair value of inventory by $358 as a result of additional information received regarding the existence of certain inventory;

a decrease in minority interest by $11,214 resulting from the completion of the valuation for one of the noncontrolling interests;

a decrease in property, plant and equipment by $3,074 due to the identification of an asset held for sale and the completion of the valuation of certain property acquired;

a decrease in the related party financing obligation by $1,156 resulting from the completion of its valuation;

an increase in other current assets by $1,006 and other non current assets by $207 due to completion of the compilation of deferred tax assets and reclassification of non current deferred taxes of $7,671 from other assets to other liabilities; and

an increase in current liabilities of $914 and other non current liabilities of $764 related to other lease obligations.

The Company believes that the acquisition of the PCB Subsidiaries will produce the following significant benefits:

Create a Leading Global PCB Company. The combination of the Company and the PCB Subsidiaries has created a leading global PCB company with high-technology capabilities and highly diversified revenue mix by geographic region and end market. Additionally, the combination resulted in a one-stop global solution from quick-turn through volume production and a focused facility specialization strategy.

Increased Market Presence and Opportunities. The combination of the Company and the PCB Subsidiaries has created an opportunity to capture additional business globally from both existing and new customers, particularly in North America and Europe.

TTM TECHNOLOGIES, INC.

Notes to Consolidated Financial Statements (Continued)

Operating Efficiencies. The combination of the Company and the PCB Subsidiaries has also provided the opportunity for potential economies of scale, cost savings and access to a highly trained PCB Subsidiary workforce, resulting from a global sales force and manufacturing platform; complementary footprints, customers and end markets; and talented management teams with leading expertise in the Asian market.

The Company believes that these primary factors support the amount of goodwill recognized as a result of the purchase price paid for the PCB Subsidiaries, in relation to other acquired tangible and intangible assets. The goodwill acquired in the acquisition is not deductible for income tax purposes.

Results of Operations

Included in the consolidated condensed statement of operations are net sales of $209,551 and $380,874 for the quarter and three quarters ended September 27, 2010, respectively, and net income of $23,382 and $29,559 for the quarter and three quarters ended September 27, 2010, respectively, from the PCB Subsidiaries operations.

Pro forma Results of Operations

Unaudited pro forma operating results for the Company, assuming the acquisition of the PCB Subsidiaries occurred on January 1, 2010 and 2009 are as follows:


	Quarter Ended				Three Quarters Ended
	September 27,		September 28,		September 27,		September 28,
	2010		2009		2010		2009
			(In thousands, except per share data)
Net sales	$	357,813	$	301,660	$	989,899	$	884,280
Net income		29,091		4,661		45,184		20,629
Basic earnings per share	$	0.36	$	0.06	$	0.57	$	0.26

Dilutive earnings per share	$	0.36	$	0.06	$	0.56	$	0.26

The pro forma information is not necessarily indicative of the actual results that would have been achieved had the PCB Subsidiaries acquisition occurred as of January 1, 2010 and 2009, or the results that may be achieved in future periods.

(3) Accounts Receivable Factoring Arrangements

In the normal course of business, the Companys foreign subsidiaries utilize accounts receivable factoring arrangements. Under these arrangements, the Company may sell certain of its trade or notes receivable to financial institutions, which are accounted for as a sale, at a discount ranging from 1% to 2% of the trade or notes receivable. In all arrangements there is no recourse against the Company for its customers failure to pay. The Company sold approximately $19,167 and $38,904 of accounts and notes receivable for the quarter and three quarters ended September 27, 2010, respectively.

(4) Inventories

Inventories as of September 27, 2010 and December 31, 2009 consist of the following:


	September 27,		December 31,
	2010		2009
	(In thousands)
Raw materials	$	47,534	$	21,758
Work-in-process		50,139		27,296
Finished goods		35,726		11,099

	$	133,399	$	60,153

TTM TECHNOLOGIES, INC.

Notes to Consolidated Financial Statements (Continued)

(5) Goodwill and Definite-lived Intangibles

As of September 27, 2010 and December 31, 2009, goodwill by operating segment and the components of definite-lived intangibles were as follows:

Goodwill


	North			Asia
	America			Pacific		Total
				(In thousands)
Balance as of December 31, 2009
Goodwill	$	131,148		$		$	131,148
Accumulated impairment losses		(117,018	)				(117,018	)

		14,130					14,130


Goodwill acquired during the three quarters ended September 27, 2010					185,623		185,623
Foreign currency translation adjustment during the three quarters ended September 27, 2010		261			194		455

Balance as of September 27, 2010
Goodwill		131,409			185,817		317,226
Accumulated impairment losses		(117,018	)				(117,018	)

	$	14,391		$	185,817	$	200,208

Definite-lived Intangibles


											Weighted
						Foreign			Net		Average
	Gross		Accumulated			Currency			Carrying		Amortization
	Amount		Amortization			Rate Change			Amount		Period
			(In thousands)								(years)
September 27, 2010:
Strategic customer relationships	$	35,429	$	(23,224	)	$	269		$	12,474		12.0
Licensing agreements		350		(157	)					193		3.0
*Acquired intangibles from the acquisition of the PCB Subsidiaries:*
Strategic customer relationships		75,975		(4,559	)		65			71,481		8.0
Trade name		10,302		(845	)		8			9,465		6.0
Order backlog		1,288		(1,286	)		(2	)				0.2

	$	123,344	$	(30,071	)	$	340		$	93,613

All of the definite-lived intangibles are amortized using the straight line method of amortization over the useful life, with the exception of the strategic customer relationship intangibles, which are amortized using an accelerated method of amortization based on cash flows. Amortization expense was $3,682 and $890 for the quarters ended September 27, 2010 and September 28, 2009, respectively, and $9,152 and $2,678 for the three quarters ended September 27, 2010 and September 28, 2009, respectively. Amortization expense related to acquired licensing agreements is classified as cost of goods sold.

TTM TECHNOLOGIES, INC.

Notes to Consolidated Financial Statements (Continued)

Estimated aggregate amortization for definite-lived intangible assets for the next five years is as follows:


	(In thousands)
Remaining 2010	$	3,820
2011		16,136
2012		15,254
2013		14,350
2014		12,858

	$	62,418

(6) Long-term Debt and Letters of Credit

The following table summarizes the long-term debt of the Company as of September 27, 2010. No long-term debt was outstanding at December 31, 2009.


	Average Effective
	Interest Rate
	as of September 27,			September 27,
	2010			2010
				(In thousands)
Bank loans, due various dates through May 2012		3.18	%	$	30,174
Term loan due November 2013		2.26	%		350,000

					380,174
Less Unamortized discount					(371	)

					379,803
Less current maturities					(66,944	)

Long-term debt, less current maturities				$	312,859

The maturities of long-term debt through 2013 are as follows:


	(In thousands)
2012	$	120,359
2013		192,500

	$	312,859

Bank loans are made up of bank lines of credit in mainland China and are used for working capital and capital investment for the Companys mainland China facilities acquired in conjunction with the acquisition of the PCB Subsidiaries. These facilities are denominated in either U.S. Dollars or Chinese Renminbi (RMB), with interest rates tied to either the LIBOR or Peoples Bank of China rates. These bank loans expire at various dates through May 2012.

On April 9, 2010, in conjunction with the acquisition of the PCB Subsidiaries, the Company became a party to a credit agreement (Credit Agreement), entered into on November 16, 2009 by the PCB Subsidiaries, which are now foreign subsidiaries of the Company. The Credit Agreement consists of a $350,000 senior secured term loan (Term Loan), a $87,500 senior secured revolving loan (Revolving Loan), a $65,000 factoring facility (Factoring Facility), and a $80,000 letters of credit facility (Letters of Credit Facility), all of which mature on November 16, 2013. The Credit Agreement is secured by substantially all of the assets of the PCB Subsidiaries, and the Company has fully and unconditionally guaranteed the Credit Agreement for full and prompt payment when due of all present and future payment obligations.

Borrowings under the Credit Agreement bear interest at a floating rate of LIBOR (term election by Company) plus an applicable interest margin. Borrowings under the Term Loan will bear interest at a rate of LIBOR plus 2.0%, LIBOR plus 2.25% under the Revolving Loan, and LIBOR plus 1.25% under the Factoring Facility. There is no provision, other than an event of default, for these interest margins to increase. At September 27, 2010, the weighted average interest rate on the outstanding borrowings under the Credit Agreement was 2.26%.

TTM TECHNOLOGIES, INC.

Notes to Consolidated Financial Statements (Continued)

The Company is required to make scheduled payments of the outstanding Term Loan balance beginning in 2011. All and any other outstanding balances under the Credit Agreement are due at the maturity date of November 16, 2013. Borrowings under the Credit Agreement are subject to certain financial and operating covenants that include, among other provisions, limitations on dividends or other distributions, in addition to maintaining maximum total leverage ratios and minimum net worth, current assets, and interest coverage ratios at both the Company and PCB Subsidiaries level. On August 3, 2010, the Company entered into a waiver and amendment letter with Hong Kong and Shanghai Banking Corporation Limited, as Facility Agent for and on behalf of the other lenders named in the Credit Agreement, as amended March 30, 2010, which amended certain financial covenants applicable to the Company. Pursuant to the waiver and amendment letter, the lenders under the Credit Agreement agreed to amend the financial covenants related to consolidated tangible net worth, gearing ratio (the ratio of consolidated net borrowings to consolidated tangible net worth), and leverage. The Company is in compliance with the amended covenants.

The Company is also required to pay a commitment fee of 0.20% per annum on any unused portion of loan or facility under the Credit Agreement. As of September 27, 2010, all of the Term Loan was outstanding, none of the Revolving Loan or Factoring Facility was outstanding, and $62,735 of the Letters of Credit Facility was outstanding. Available borrowing capacity under the Revolving Loan and Factoring Facility was $87,500 and $65,000, respectively, at September 27, 2010.

On April 9, 2010, the Company entered into an interest rate swap arrangement with an initial notional amount of $146,500, for the period beginning April 18, 2011 and ending on April 16, 2013. See Note 11 Financial Instruments.

Other Letters of Credit

The Company maintains several letters of credit: a $1,494 standby letter of credit expiring December 31, 2010 associated with its insured workers compensation program, a $1,000 standby letter of credit expiring February 28, 2011 related to the lease of one of its production facilities, and various other letters of credits aggregating to approximately $654 maintained by the Companys foreign subsidiaries related to purchases of machinery and equipment with various expiration dates through June 2011.

(7) Convertible Senior Notes

In May 2008, the Company issued 3.25% Convertible Senior Notes (Convertible Notes) due May 15, 2015, in a public offering for an aggregate principal amount of $175,000. The Convertible Notes bear interest at a rate of 3.25% per annum. Interest is payable semiannually in arrears on May 15 and November 15 of each year, beginning November 15, 2008. The Convertible Notes are senior unsecured obligations and rank equally to the Companys future unsecured senior indebtedness and senior in right of payment to any of the Companys future subordinated indebtedness. The liability and equity components of the Convertible Notes are separately accounted for in a manner that reflects the Companys non-convertible debt borrowing rate when interest costs are recognized.

TTM TECHNOLOGIES, INC.

Notes to Consolidated Financial Statements (Continued)

The Company received proceeds of $169,249 after the deduction of offering expenses of $5,751 upon issuance of the Convertible Notes. The Company has allocated the Convertible Notes offering costs to the liability and equity components in proportion to the allocation of proceeds and accounted for them as debt issuance costs and equity issuance costs, respectively. At September 27, 2010 and December 31, 2009, the following summarizes the liability and equity components of the Convertible Notes:


	September 27,			December 31,
	2010			2009
	(In thousands)
Liability components:
Convertible Notes	$	175,000		$	175,000
Less: Convertible Notes unamortized discount		(31,110	)		(35,118	)

Convertible Notes, net of discount	$	143,890		$	139,882

Equity components:
Additional paid-in capital:
Embedded conversion option Convertible Notes	$	43,000		$	43,000
Embedded conversion option Convertible Notes issuance costs		(1,413	)		(1,413	)

	$	41,587		$	41,587

At September 27, 2010 and December 31, 2009, remaining unamortized debt issuance costs included in other non-current assets were $3,138 and $3,542, respectively. The debt issuance costs and debt discount are being amortized to interest expense over the term of the Convertible Notes using the effective interest rate method. At September 27, 2010, the remaining amortization period for the unamortized Convertible Note discount and debt issuance costs was 4.6 years.

The components of interest expense resulting from the Convertible Notes for the quarter and three quarters ended September 27, 2010 and September 28, 2009 are as follows:


	Quarter Ended				Three Quarters Ended
	September 27,		September 28,		September 27,		September 28,
	2010		2009		2010		2009
			(In thousands)
Contractual coupon interest	$	1,422	$	1,422	$	4,266	$	4,266
Amortization of Convertible Notes debt discount		1,364		1,255		4,008		3,687
Amortization of debt issuance costs		137		126		404		372

	$	2,923	$	2,803	$	8,678	$	8,325

For the quarter and three quarters ended September 27, 2010 and September 28, 2009, the amortization of the Convertible Notes debt discount and debt issuance costs are based on an effective interest rate of 8.37%.

Conversion

At any time prior to November 15, 2014, holders may convert their Convertible Notes into cash and, if applicable, into shares of the Companys common stock based on a conversion rate of 62.6449 shares of the Companys common stock per $1 principal amount of Convertible Notes, subject to adjustment, under the following circumstances: (1) during any calendar quarter beginning after June 30, 2008 (and only during such calendar quarter), if the last reported sale price of our common stock for at least 20 trading days during the 30 consecutive trading days ending on the last trading day of the immediately preceding calendar quarter is greater than or equal to 130% of the applicable conversion price on each applicable trading day of such preceding calendar quarter; (2) during the five business day period after any 10 consecutive trading day period in which the trading price per note for each day of that 10 consecutive trading day period was less than 98% of the product of the last reported sale price of the Companys common stock and the conversion rate on such day; or (3) upon the occurrence of specified corporate transactions described in the prospectus supplement. As of September 27, 2010, none of the conversion criteria had been met.

TTM TECHNOLOGIES, INC.

Notes to Consolidated Financial Statements (Continued)

combinations, other distributions of shares, cash or other assets to stockholders, including self-tender transactions (Other Conversion Rate Adjustments), the conversion rate may be modified to adjust the number of shares per $1 principal amount of the notes. As of September 27, 2010, none of the criteria for a fundamental change or a conversion rate adjustment had been met.

The maximum number of shares issuable upon conversion, including the effect of a fundamental change and subject to Other Conversion Rate Adjustments, would be 13,978.

Note Repurchase

The Company is not permitted to redeem the Convertible Notes at any time prior to maturity. In the event of a fundamental change or certain default events, as defined in the prospectus supplement, holders may require the Company to repurchase for cash all or a portion of their Convertible Notes at a price equal to 100% of the principal amount, plus any accrued and unpaid interest.

Convertible Note Hedge and Warrant Transaction

In connection with the issuance of the Convertible Notes, the Company entered into a convertible note hedge and warrant transaction (Call Spread Transaction), with respect to the Companys common stock. The convertible note hedge, which cost an aggregate of $38,257 and was recorded, net of tax, as a reduction of additional paid-in capital, consists of the Companys option to purchase up to 10,963 shares of common stock at a price of $15.96 per share. This option expires on May 15, 2015 and can only be executed upon the conversion of the above mentioned Convertible Notes. Additionally, the Company sold warrants to purchase 10,963 shares of its common stock at a price of $18.15 per share. The warrants expire on August 17, 2015. Proceeds from the sale of warrants of $26,197 was recorded as an addition to additional paid-in capital. The Call Spread Transaction has no effect on the terms of the Convertible Notes and reduces potential dilution by effectively increasing the conversion price of the Convertible Notes to $18.15 per share of the Companys common stock.

(8) Comprehensive Income

The following table summarizes the components of comprehensive income (loss) for the quarter and three quarters ended September 27, 2010 and September 28, 2009:


	Quarter Ended						Three Quarters Ended
	September 27,			September 28,			September 27,			September 28,
	2010			2009			2010			2009
				(In thousands)
Net income (loss)	$	32,145		$	(4,885	)	$	43,370		$	2,490
Other comprehensive income:
Foreign currency translation adjustments, net of tax expense of $202 and $10 for the quarters ended September 27, 2010 and September 28, 2009, respectively, and net of tax expense (benefit) of $271 and ($26) for the three quarters ended September 27, 2010 and September 28, 2009, respectively		7,384			17			9,772			(42	)
Unrealized loss on effective cash flow hedges, net of tax benefit of $228 and $608 for the quarter and three quarters ended September 27, 2010		(1,101	)					(3,025	)

Total other comprehensive income (loss), net of tax		6,283			17			6,747			(42	)

Comprehensive income		38,428			(4,868	)		50,117			2,448
Comprehensive income attributable to noncontrolling interests		(4,048	)					(6,300	)

Comprehensive income (loss) attributable to TTM Technologies, Inc. stockholders	$	34,380		$	(4,868	)	$	43,817		$	2,448

TTM TECHNOLOGIES, INC.

Notes to Consolidated Financial Statements (Continued)

The following provides a summary of the activity associated with the designated cash flow hedges reflected in accumulated other comprehensive income for the three quarters ended September 27, 2010:


	September 27, 2010
	(in thousands)
Beginning balance, net of tax	$
Changes in fair value loss, net of tax		(3,025	)
Reclassification to earnings, net of tax

Ending balance, net of tax	$	(3,025	)

The amount recorded in accumulated other comprehensive income for the cash flow hedges is expected to be reclassified into the consolidated condensed statement of operations when the forecasted transaction affects earnings. The Company expects that approximately $1,004 will be reclassified into the statement of operations, net of tax, in the next 12 months (see Note 11).

(9) Restructuring Charges and Impairment of Long-lived Assets

Restructuring Charges

On September 1, 2009 the Company announced its plan to close its Hayward and Los Angeles, California facilities and lay off approximately 340 employees at these sites. As a result, the Company recorded $2,501 in separation costs for the quarter and three quarters ended September 28, 2009, related to this restructuring. These charges are presented as restructuring charges in the consolidated condensed statement of operations. As of September 27, 2010, $57 of accrued separation costs remain for employees yet to be separated. The Company expects the remaining employees to be separated and the remaining accrued restructuring costs to be paid during the fourth quarter of 2010. Accrued restructuring costs are included as a component of accrued salaries, wages and benefits in the consolidated condensed balance sheet.

During the three quarters ended September 27, 2010, the Company incurred $399 in contract termination costs related to building operating leases associated with the closure of its Hayward, California manufacturing facility, which the Company ceased use. These accrued contract termination costs are included as a component of other accrued expenses in the consolidated balance sheet.

The Hayward and Los Angeles, California facilities were part of the Companys North America operating segment.

The below table shows the utilization of the accrued restructuring costs during the three quarters ended September 27, 2010:


				Contract
	Severance			Termination			Total
				(In thousands)
Accrued at December 31, 2009	$	702		$	529		$	1,231
Estimated liabilities					399			399
Change in estimates		50						50
Amount paid		(695	)		(436	)		(1,131	)

Accrued at September 27, 2010	$	57		$	492		$	549

In January 2009, the Company announced its plan to close its Redmond, Washington facility and lay off approximately 370 employees at this site. In addition, the Company laid off about 140 employees at various other U.S. facilities in January 2009. As a result, the Company recorded $2,508 in separation costs for the three quarters ended September 28, 2009, related to this restructuring. These charges are presented as restructuring charges in the consolidated condensed statement of operations. As of December 31, 2009, the Redmond, Washington facility had been closed, all employees related to the January 2009 restructuring had been separated, and all accrued separation costs had been paid. The Redmond, Washington facility was part of the Companys North America operating segment.

TTM TECHNOLOGIES, INC.

Notes to Consolidated Financial Statements (Continued)

Impairment of Long-lived Assets

During the three quarters ended September 27, 2010, the Company reduced the carrying value of the Dallas, Oregon facility, which was classified as an asset held for sale in a prior period, to record the estimated fair value less costs to sell, resulting in an impairment of $766 due to a depressed real estate market in the surrounding Dallas, Oregon region. During the third quarter ended September 27, 2010, the Dallas Oregon facility was sold for $234.

During the quarter and three quarters ended September 28, 2009, the Company recorded the impairment of certain long-lived assets, including assets held for sale, for its Redmond, Washington, Dallas, Oregon, and two California facilities in the amount of $10,293 and $10,636 for the quarter and three quarters ended September 28, 2009, respectively. The impairment for the Redmond, Washington and the two California facilities of $8,043 and $8,386 for the quarter and three quarters ended September 28, 2009, respectively, is directly related to facility closures and consisted of buildings and machinery and equipment. Additionally, in the third quarter of 2009, the Company reduced the carrying value of the Dallas, Oregon facility, which was classified as an asset held for sale, by $2,250 to record the estimated fair value less costs to sell given current market conditions. These charges are presented as impairment of long-lived assets in the Companys consolidated condensed statement of operations.

The Dallas, Oregon, Redmond, Washington and the two California facilities were part of the Companys North America operating segment.

(10) Income Taxes

The Companys effective tax rate was 22.7% and (39.4%) for the quarters ended September 27, 2010 and September 28, 2009, respectively, and 27.5% and 35.6% for the three quarters ended September 27, 2010 and September 28, 2009, respectively. The Companys effective tax rate decreased primarily due to the impact of an increase in total earnings earned in lower-tax jurisdictions resulting from the acquisition of the PCB Subsidiaries, partially offset by the discrete tax expense associated with non-deductible acquisition-related costs. Additionally, certain foreign losses generated are not more than likely to be realizable, and thus, no income tax benefit has been recognized on these losses. The Companys effective tax rate will generally differ from the U.S. federal statutory rate of 35% due to favorable tax rates associated with certain earnings from the Companys operations in lower-tax jurisdictions in China. The Companys foreign earnings attributable to the Asia Pacific operating segment will be permanently reinvested in such foreign jurisdictions and, therefore, no deferred tax liabilities for U.S. income taxes on undistributed earnings are recorded.

(11) Financial Instruments

Derivatives

As a matter of policy, the Company uses derivatives for risk management purposes, and does not use derivatives for speculative purposes. Derivatives are typically entered into as hedges against changes in interest rates, currency exchange rates, and other risks. All derivative instruments are recognized as either assets or liabilities in the balance sheet at their respective fair values. For derivatives that are designated as a cash flow hedge, changes in the fair value of the derivative are recognized in accumulated other comprehensive income, to the extent the derivative is effective at offsetting the changes in cash flow being hedged until the hedged item affects earnings. To the extent there is any hedge ineffectiveness, changes in fair value relating to the ineffective portion are immediately recognized in earnings. Changes in the fair value of derivatives that are not designated as hedges are recorded in earnings each period.

Interest Rate Swaps

The Companys business is exposed to interest rate risk resulting from fluctuations in interest rates on certain variable rate LIBOR debt. Increases in interest rates would increase interest expenses relating to the outstanding variable rate borrowings of certain foreign subsidiaries and increase the cost of debt. Fluctuations in interest rates can also lead to significant fluctuations in the fair value of the debt obligations.

On April 9, 2010, the Company entered into a two-year pay-fixed, receive floating (1-month LIBOR), amortizing interest rate swap arrangement with an initial notional amount of $146,500, for the period beginning April 18, 2011 and ending on April 16, 2013. The interest rate swap will apply a fixed interest rate against the first interest payments of a portion of the $350,000 Term Loan over

TTM TECHNOLOGIES, INC.

Notes to Consolidated Financial Statements (Continued)

the term of the interest rate swap. As part of the Companys risk management strategy, the Company chose not to hedge its initial year interest payment cash flows of its Term Loan because of low current LIBOR rates which would have initially resulted in locking in a fixed rate higher than LIBOR spot rate at the onset.

The notional amount of the interest rate swap decreases to zero over its term, consistent with the Companys risk management objectives. The notional value underlying the hedge at September 27, 2010 was $146,500. Under the terms of the interest rate swap, the Company will pay a fixed rate of 2.50% and will receive floating 1-month LIBOR during the swap period. The Company has designated this interest rate swap as a cash flow hedge.

At inception, the fair value of the interest rate swap was zero. As of September 27, 2010, the fair value of the swap was recorded as a liability of $3,684 in other long-term liabilities. The change in the fair value of the interest rate swap is recorded as a component of accumulated other comprehensive income, net of tax, in the Companys consolidated balance sheet. No ineffectiveness was recognized for the quarter ended September 27, 2010. There was no impact to interest expense for the quarter ending September 27, 2010 as the interest rate swap does not hedge interest rate cash flows until the period beginning April 18, 2011.

Additionally, the Company, through its acquisition of the PCB Subsidiaries, assumed a long term pay-fixed, receive floating (1-month LIBOR), amortizing interest rate swap arrangement with an initial notional amount of $40,000, for the period beginning October 8, 2008 and ending on July 30, 2012. This interest rate swap applied to the PCB Subsidiaries pre-acquisition, long-term borrowings, which were paid-off on the acquisition date. The notional amount of the interest rate swap decreases to zero over its term. Under the terms of the interest rate swap, the Company will pay a fixed rate of 3.43% and will receive floating 1-month LIBOR during the swap period. As the borrowings attributable to this interest rate swap were paid off upon acquisition, the Company did not designate this interest rate swap as a cash flow hedge. As of September 27, 2010, the fair value of the swap was recorded as a liability of $1,553 in other long-term liabilities. The change in the fair value of this interest rate swap is recorded as other, net in the consolidated condensed statement of operations.

Foreign Exchange Contracts

The Company enters into foreign currency forward contracts to mitigate the impact of changes in foreign currency exchange rates and to reduce the volatility of purchases and other obligations generated in currencies other than the functional currencies. Our foreign subsidiaries may at times purchase forward exchange contracts to manage their foreign currency risks in relation to particular purchases or obligations, such as the related party financing obligation arising from the put call option to purchase the remaining 20% of a majority owned subsidiary in 2013 (Note 2), and certain purchases of machinery denominated in foreign currencies other than the Companys foreign functional currency. The notional amount of the foreign exchange contracts at September 27, 2010 was approximately $30,145. The Company did not have any foreign exchange contracts as of December 31, 2009. The Company has designated certain of these foreign exchange contracts as cash flow hedges, with the exception of the foreign exchange contracts in relation to the related party financing obligation. In this instance, the hedged item is a recognized liability subject to foreign currency transaction gains and losses and, therefore, changes in the hedged item due to foreign currency exchange rates are already recorded in earnings. Therefore, hedge accounting has not been applied.

TTM TECHNOLOGIES, INC.

Notes to Consolidated Financial Statements (Continued)

The Company only had derivative instruments during the three quarters ended September 27, 2010. The fair values of derivative instruments in the consolidated condensed balance sheet are as follows:


		Asset /
		(Liability)
		Fair Value
		September 27,
	Balance Sheet Location	2010
		(In thousands)
Cash flow derivative instruments designated as hedges:
Foreign exchange contracts	Prepaid expenses and other current assets	$	51
Interest rate swap	Other long-term liabilities		(3,684	)
Cash flow derivative instruments not designated as hedges:
Foreign exchange contracts	Prepaid expenses and other current assets		456
Foreign exchange contracts	Other accrued expenses		(3	)
Foreign exchange contracts	Deposits and other non-current assets		797
Interest rate swap	Other long-term liabilities		(1,553	)

		$	(3,936	)

TTM TECHNOLOGIES, INC.

Notes to Consolidated Financial Statements (Continued)

The following tables provide information about the amounts recorded in accumulated other comprehensive income related to derivatives designated as cash flow hedges, as well as the amounts recorded in each caption in the consolidated condensed statement of operations when derivative amounts are reclassified out of accumulated other comprehensive income:

Quarter Ended September 27, 2010

Effective Portion

Ineffective Portion

Gain/ (Loss)

Recognized in Other

Reclassified into

Recognized into

Financial Statement Caption

Comprehensive Income

Income

(In thousands)

Cash flow hedge:

Interest rate swap

Interest expense

(1,403

)

Foreign currency forward

Other, net

(1,329

)

Three Quarters Ended September 27, 2010

Effective Portion

Ineffective Portion

Gain/ (Loss)

Recognized in Other

Reclassified into

Recognized into

Financial Statement Caption

Comprehensive Income

Income

(In thousands)

Cash flow hedge:

Interest rate swap

Interest expense

(3,684

)

Foreign currency forward

Other, net

(3,633

)

The net gain recognized in the consolidated condensed statement of operations on derivative instruments not designated as hedges is as follows:

Three

Quarter Ended

Quarters Ended

September 27,

Financial Statement Caption

2010

(In thousands)

Derivative instruments not designated as hedges:

Interest rate swap

Other, net

145

Foreign exchange contracts

Other, net

2,030

400

2,124

545

Other Financial Instruments

The carrying amount and estimated fair value of the Companys financial instruments at September 27, 2010 and December 31, 2009 were as follows:


	September 27, 2010				December 31, 2009
	Carrying		Fair		Carrying		Fair
	Amount		Value		Amount		Value
			(In thousands)
Short-term investments	$		$		$	1,351	$	1,351
Short-term derivative assets		507		507
Short-term derivative liabilities		3		3
Noncurrent derivative assets		797		797
Long-term derivative liabilities		5,237		5,237
Long-term equity investment		2,718		2,283
Related party financing obligation		20,230		20,214
Long-term debt		379,803		372,345
Convertible senior notes		143,890		167,510		139,882		174,340

The fair value of the derivative instruments was determined using pricing models developed based on the LIBOR swap rate, foreign currency exchange rates, and other observable market data, including quoted market prices, as appropriate. The values were adjusted to reflect nonperformance risk of both the counterparty and the Company.

The fair value of equity securities accounted for under the cost method (nonmarketable equity securities) was determined using market multiples derived from comparable companies. Under that approach, the identification of comparable companies requires significant judgment. Additionally, multiples might lie in ranges with a different multiple for each comparable company. The selection of where the appropriate multiple falls within that range also requires significant judgment, considering both qualitative and quantitative factors.

The related party financing obligation fair value was estimated based on the minimum price of the obligation plus 2.5% interest discounted at the liabilitys discount rate based on the Companys adjusted cost of borrowing.

TTM TECHNOLOGIES, INC.

Notes to Consolidated Financial Statements (Continued)

The fair value of the long-term debt was estimated based on discounting the par value of the debt over its life for the difference between the debt stated interest rate and current market rates for similar debt at September 27, 2010.

The fair value of the convertible senior notes was estimated based on quoted market prices.

The fair value of short-term investments was estimated based on a court order issued by a U.S. District Court prescribing amounts to be distributed which resulted in sufficient information available to determine the investment fair value.

At September 27, 2010 and December 31, 2009, the Companys financial instruments included cash and cash equivalents, short-term investments, restricted cash, accounts receivable, accounts payable and equipment payables. Due to short-term maturities, the carrying amount of these instruments approximates fair value.

(12) Concentration of Credit Risk

In the normal course of business, the Company extends credit to its customers, which are concentrated primarily in the computer and electronics instrumentation and aerospace/defense industries, and most of which are located outside the United States. The Company performs ongoing credit evaluations of customers and does not require collateral. The Company also considers the credit risk profile of the entity from which the receivable is due in further evaluating collection risk.

As of September 27, 2010 and December 31, 2009, the Companys 10 largest customers in the aggregate accounted for 54% and 57%, respectively, of total accounts receivable. If one or more of the Companys significant customers were to become insolvent or were otherwise unable to pay for the manufacturing services provided, it would have a material adverse effect on the Companys financial condition and results of operations.

(13) Fair Value Measures

The Company measures at fair value its financial and non-financial assets by using a fair value hierarchy that prioritizes the inputs to valuation techniques used to measure fair value. Fair value is the price that would be received to sell an asset or paid to transfer a liability in an orderly transaction between market participants at the measurement date, essentially an exit price, based on the highest and best use of the asset or liability. The levels of the fair value hierarchy are:

Level 1 Quoted market prices in active markets for identical assets or liabilities;

Level 2 Significant other observable inputs (e.g., quoted prices for similar items in active markets, quoted prices for identical or similar items in markets that are not active, inputs other than quoted prices that are observable such as interest rate and yield curves, and market-corroborated inputs); and

Level 3 Unobservable inputs in which there is little or no market data, which require the reporting unit to develop its own assumptions.

TTM TECHNOLOGIES, INC.

Notes to Consolidated Financial Statements (Continued)

At September 27, 2010 and December 31, 2009, the following financial assets and liabilities were measured at fair value on a recurring basis using the type of inputs shown:


	September 27,		Fair Value Measurements Using:
	2010		Level 1 Inputs		Level 2 Inputs		Level 3 Inputs
	(In thousands)
Cash equivalents	$	39,986	$	39,986
Foreign exchange derivative assets		1,304				1,304
Interest rate swap derivative liabilities		5,237				5,237
Foreign exchange derivative liabilities		3				3


	December 31,		Fair Value Measurements Using:
	2009		Level 1 Inputs		Level 2 Inputs	Level 3 Inputs
	(In thousands)
Cash equivalents	$	70,794	$	70,794
Short-term investments		1,351					1,351
Restricted cash		120,000		120,000

There were no transfers of financial assets or liabilities between Level 1 and Level 2 inputs for the quarter and three quarters ended September 27, 2010.

The following is a summary of activity for fair value measurements using Level 3 inputs for the three quarters ended September 27, 2010 and September 28, 2009:


	Three Quarters Ended
	September 27, 2010			September 28, 2009
Fair Value Measurement using Significant Unobservable Inputs (Level 3)
	(In thousands)
Beginning balance	$	1,351		$	3,657
Transfers to level 3
Settlement		(1,351	)		(2,238	)
Changes in fair value included in earnings

Ending balance	$			$	1,419

The majority of the Companys non-financial instruments, which include goodwill, intangible assets, inventories, and property, plant and equipment, are not required to be carried at fair value on a recurring basis. However, if certain triggering events occur (or tested at least annually for goodwill) such that a non-financial instrument is required to be evaluated for impairment, based upon a comparison of the non-financial instruments fair value to its carrying value, an impairment is recorded to reduce the carrying value to the fair value, if the carrying value exceeds the fair value.

TTM TECHNOLOGIES, INC.

Notes to Consolidated Financial Statements (Continued)

For the three quarters ended September 27, 2010 and September 28, 2009, the following non-financial instruments were measured at fair value on a nonrecurring basis using the type of inputs shown:

Fair Value Measurements Using:

Total losses for

the three quarters

September 27,

Level 1

Level 2

Level 3

ended

2010

Inputs

September 27, 2010

(In thousands)

Asset held for sale

766


	Fair Value Measurements Using:
							Total losses for
							the three quarters
	September 28,		Level 1	Level 2		Level 3	ended
	2009		Inputs	Inputs		Inputs	September 28, 2009
				(In thousands)
Long-lived assets held and used	$	1,516		$	1,516		$	8,386

Asset held for sale		1,000			1,000			2,250

							$	10,636

The fair values of long-lived assets held and used and the asset held for sale were primarily determined using appraisals and comparable prices of similar assets, which are considered to be Level 2 inputs.

(14) Commitments and Contingencies

Legal Matters

Prior to the Companys acquisition of the PCB Subsidiaries of Meadville Holdings Ltd., two of the PCB Subsidiaries were involved in various legal and arbitration proceedings instituted in the Peoples Republic of China by a former customer. The proceedings related to quality claims about certain products supplied by the PCB Subsidiaries. In May 2010, the parties entered into a settlement agreement whereby the PCB Subsidiaries agreed to pay approximately $2,500 as the final settlement and the former customer withdrew all the legal and arbitration proceedings against the PCB Subsidiaries after receipt of the settlement funds.

Prior to the Companys acquisition of Tyco Printed Circuit Group LP (PCG) in October 2006, PCG made legal commitments to the U.S. Environmental Protection Agency (U.S. EPA) and the State of Connecticut regarding settlement of enforcement actions against the PCG operations in Connecticut. On August 17, 2004, PCG was sentenced for Clean Water Act violations and was ordered to pay a $6,000 fine and an additional $3,700 to fund environmental projects designed to improve the environment for Connecticut residents. In September 2004, PCG agreed to a stipulated judgment with the Connecticut Attorney Generals office and the Connecticut Department of Environmental Protection (Connecticut DEP) under which PCG paid a $2,000 civil penalty and agreed to implement capital improvements of $2,400 to reduce the volume of rinse water discharged from its manufacturing facilities in Connecticut. The obligations to the U.S. EPA were completed as of July 1, 2009. The Connecticut DEP obligation involves the installation of rinse water recycling systems at the Stafford, Connecticut facilities. As of September 27, 2010, one recycling system was completed and placed into operation, and approximately $93 remains to be expended in the form of capital improvements to meet the second rinse water recycling system requirement which is expected to be completed by December 2010. The Company has assumed these legal commitments as part of its purchase of PCG. Failure to meet the remaining commitment could result in further costly enforcement actions.

The Company is subject to various other legal matters, which it considers normal for its business activities. While the Company currently believes that the amount of any ultimate potential loss for known matters would not be material to the Companys financial condition, the outcome of these actions is inherently difficult to predict. In the event of an adverse outcome, the ultimate potential loss could have a material adverse effect on the Companys financial condition or results of operations in a particular period. The Company has accrued amounts for its loss contingencies which are probable and estimable at September 27, 2010 and December 31, 2009. However, these amounts are not material to the condensed consolidated financial statements.

TTM TECHNOLOGIES, INC.

Notes to Consolidated Financial Statements (Continued)

Environmental Matters

The process to manufacture PCBs requires adherence to city, county, state, federal and foreign jurisdiction environmental regulations regarding the storage, use, handling and disposal of chemicals, solid wastes and other hazardous materials as well as air quality standards. Management believes that its facilities comply in all material respects with environmental laws and regulations. The Company has in the past received certain notices of violations and has implemented certain required minor corrective activities. There can be no assurance that violations will not occur in the future.

The Company is involved in various stages of investigation and cleanup in Connecticut related to environmental remediation matters for two of the sites and has investigated a third site. The ultimate cost of site cleanup is difficult to predict given the uncertainties regarding the extent of the required cleanup, the interpretation of applicable laws and regulations, and alternative cleanup methods. The third Connecticut site was investigated under Connecticuts Land Transfer Act and no contamination above applicable standards was found. The Company is also involved in additional investigation and remediation of former manufacturing sites in Washington and California. The Company concluded that it was probable that it would incur remediation and monitoring costs for these sites of approximately $755 and $720 as of September 27, 2010 and December 31, 2009, respectively, the liability for which is included in other long-term liabilities. The Company estimates that it will incur the remediation costs over the next 12 to 84 months. This accrual was discounted at 8% per annum to determine the Companys best estimate of the liability, which the Company estimated as ranging from $839 to $1,274 on an undiscounted basis.

The liabilities recorded do not take into account any claims for recoveries from insurance or third parties and none are anticipated. These costs are mostly comprised of estimated consulting costs to evaluate potential remediation requirements, completion of the remediation, and monitoring of results achieved. Subject to the imprecision in estimating future environmental remediation costs, the Company does not expect the outcome of the environmental remediation matters, either individually or in the aggregate, to have a material adverse effect on its financial position, results of operations, or cash flows.

(15) Earnings Per Share

The following is a reconciliation of the numerator and denominator used to calculate basic earnings per share and diluted earnings per share for the quarter and three quarters ended September 27, 2010 and September 28, 2009:


	Quarter Ended					Three Quarters Ended
	September 27,		September 28,			September 27,		September 28,
	2010		2009			2010		2009
	(In thousands, except per share amounts)
Net income (loss) attributable to TTM Technologies, Inc. stockholders	$	29,091	$	(4,885	)	$	38,505	$	2,490


Weighted average shares outstanding		80,059		43,142			66,730		43,048
Dilutive effect of stock options, restricted stock units, and performance-based restricted units		462					521		410

Diluted shares		80,521		43,142			67,251		43,458

Earnings per share attributable to TTM Technologies, Inc stockholders:
Basic	$	0.36	$	(0.11	)	$	0.58	$	0.06

Dilutive	$	0.36	$	(0.11	)	$	0.57	$	0.06

Stock options, restricted stock units, and performance-based restricted stock units to purchase 1,853 shares of common stock for the quarter ended September 27, 2010 and 1,960 and 2,223 shares of common stock for the three quarters ended September 27, 2010 and September 28, 2009, respectively, were not considered in calculating diluted earnings per share because the options exercise prices or the total expected proceeds under the treasury stock method for stock options or restricted stock units and performance-based restricted stock units was greater than the average market price of common shares during the period and, therefore, the effect would be anti-dilutive. For the third quarter ended September 28, 2009 potential shares of common stock consisting of stock options to purchase approximately 2,122 shares of common stock at exercise prices ranging from $2.76 to $16.82 per share and 1,185 restricted stock units, were not included in the computation of diluted earnings per share because the Company incurred a net loss from operations and, as a result, the impact would be anti-dilutive.

TTM TECHNOLOGIES, INC.

Notes to Consolidated Financial Statements (Continued)

Additionally, for the quarter and three quarters ended September 27, 2010, the effect of 10,963 shares of common stock related to the Companys Convertible Notes, the effect of the convertible note hedge to purchase 10,963 shares of common stock and the warrants sold to purchase 10,963 shares of the Companys common stock were not included in the computation of dilutive earnings per share because the conversion price of the Convertible Notes and the strike price of the warrants to purchase the Companys common stock were greater than the average market price of common shares during the period, and therefore, the effect would be anti-dilutive.

(16) Stock-Based Compensation

Stock-based compensation expense is recognized in the accompanying consolidated condensed statements of operations as follows:


	Quarter Ended						Three Quarters Ended
	September 27,			September 28,			September 27,			September 28,
	2010			2009			2010			2009
	(In thousands)
Cost of goods sold	$	309		$	413		$	964		$	1,263
Selling and marketing		105			133			321			413
General and administrative		1,241			980			3,375			3,022

Stock-based compensation expense recognized		1,655			1,526			4,660			4,698
Income tax benefit recognized		(557	)		(548	)		(1,447	)		(1,602	)

Total stock-based compensation expense after income taxes	$	1,098		$	978		$	3,213		$	3,096

Performance-based Restricted Stock Units

During the first quarter ended March 29, 2010, the Company implemented a new long-term incentive program for executive officers that provides for the issuance of performance-based restricted stock units (PRUs), representing hypothetical shares of the Companys common stock that may be issued under the Companys 2006 Incentive Compensation Plan. Under the PRU program, a target number of PRUs are awarded at the beginning of each three-year performance period. The number of shares of our common stock released at the end of the performance period will range from zero to 2.4 times the target number depending on performance during the period. The performance metrics of the PRU program are based on (a) annual financial targets, which for 2010 are based on revenue and earnings before interest, tax, depreciation, and amortization expense, each equally weighted, and (b) an overall modifier based on the Companys total stockholder return (TSR) relative to the S&P SmallCap 600 over the three-year performance period.

Under the PRU program, financial goals are set at the beginning of each fiscal year and performance is reviewed at the end of that year. The percentage to be applied to each participants target award ranges from zero to 160% based upon the extent to which the annual financial performance goals are achieved. If specific performance threshold levels for the annual financial goals are met, the amount earned for that element will be applied to one-third of the participants PRU award to determine the number of units earned.

At the end of the three-year performance period, the total units earned, if any, are adjusted by applying a modifier, ranging from zero to 150% based on the Companys TSR based on stock price changes relative to the TSR of S&P SmallCap 600 companies for the same three-year period.

The TSR modifier is intended to ensure that there are limited or no payouts under the PRU program if the Companys stock performance is below the median TSR of S&P SmallCap 600 companies for the three-year performance period. Where the annual financial goals have been met and where there has been strong relative TSR performance over the three-year performance period, the PRU program may provide substantial rewards to participants with a maximum payout of 2.4 times the initial PRU award. However, even if all of the annual financial metric goals are achieved in each of the three years, there may be limited or no payouts if the Companys stock performance is below that of the median TSR of S&P SmallCap 600 companies.

Recipients of PRU awards generally must remain employed by the Company on a continuous basis through the end of the three-year performance period in order to receive any amount of the PRUs covered by that award. Target shares subject to PRU awards do not have voting rights of common stock until earned and issued following the end of the three-year performance period.

TTM TECHNOLOGIES, INC.

Notes to Consolidated Financial Statements (Continued)

During the three quarters ended September 27, 2010, the Company granted 48 PRUs, representing the first one-third of the 143 target PRUs, with an estimated weighted average fair value per unit of $10.11 at the date of grant. There were no PRUs granted during the quarter ended September 27, 2010. The fair value for PRUs granted is calculated using the Monte Carlo simulation model, as the TSR modifier contains a market condition. For the three quarters ended September 27, 2010 the following assumptions were used in determining the fair value:


	September 27,
	2010
Risk-free interest rate		1.3	%
Dividend yield
Expected volatility		65	%
Expected term in months		33

The expected term of the PRUs reflects the performance period for the PRUs granted on March 25, 2010. Expected volatility is calculated using the Companys historical stock price to calculate expected volatility over the expected term of each grant. The risk-free interest rate for the expected term of PRUs is based on the U.S Treasury yield curve in effect at the time of grant. As of September 27, 2010, $392 of total unrecognized compensation cost related to PRUs is expected to be recognized over a weighted-average period of 2.3 years.

Restricted Stock Units

The Company granted 66 restricted stock units during the quarter ended September 27, 2010, and 442 and 684 restricted stock units during the three quarters ended September 27, 2010 and September 28, 2009, respectively. There were no restricted stock units granted during the quarter ended September 28, 2009. The units granted were estimated to have a weighted-average fair value per unit of $9.46 for the quarter ended September 27, 2010, and $9.19 and $4.54 for the three quarters ended September 27, 2010 and September 28, 2009, respectively. The fair value for restricted stock units granted is based on the closing share price of the Companys common stock on the date of grant. As of September 27, 2010, $5,095 of total unrecognized compensation cost related to restricted stock units is expected to be recognized over a weighted-average period of 0.9 years.

Stock Options

The Company granted 60 and 28 stock option awards during the quarters ended September 27, 2010 and September 28, 2009, respectively, and 60 and 83 stock option awards during the three quarters ended September 27, 2010 and September 28, 2009, respectively. The stock awards granted were estimated to have a weighted-average fair value per unit of $6.74 and $6.12 for the quarters ended September 27, 2010 and September 28, 2009, respectively, and $6.74 and $4.52 for the three quarters ended September 27, 2010 and September 28, 2009, respectively. The fair value for stock options granted is calculated using the Black-Scholes option-pricing model on the date of grant. For the quarter and three quarters ended September 27, 2010 and September 28, 2009 the following assumptions were used in determining the fair value:


	For the Quarter			For the			For the Three
	and Three			Quarter Ended			Quarters Ended
	Quarters Ended			September 28,			September 28,
	September 27, 2010			2009			2009
Risk-free interest rate		2.7	%		2.9	%		2.4	%
Dividend yield
Expected volatility		69	%		60	%		60	%
Expected term in months		96			66			66

As of September 27, 2010, $816 of total unrecognized compensation cost related to stock options is expected to be recognized over a weighted-average period of 1.0 year.

TTM TECHNOLOGIES, INC.

Notes to Consolidated Financial Statements (Continued)

Foreign Employee Share Awards

The PCB Subsidiaries, prior to their acquisition by the Company, maintained employee share award grants whereby a related party and controlling shareholder of the PCB Subsidiaries transferred Meadville Holdings shares to certain employees involved in the PCB Subsidiaries business to incentivize and reward such employees if stated service periods were completed by the employee. At the acquisition date of the PCB Subsidiaries, the unvested Meadville Holdings shares transferred by this entity were exchanged for the right to earn fractional shares of TTM common stock plus cash equal to the cash dividend to be received by Meadville Holdings shareholders as a dividend after the close of the acquisition. These remaining grants, with the condition of employment and cliff vesting, will vest in five tranches, with two tranches vesting in 2011 and the remaining three tranches vesting annually thereafter, through 2014. As per ASC Topic 805, Business Combinations, the fair value of the common stock plus cash consideration to be received by the employee participating in the employee share award grants, after adjustment for estimated forfeiture, that is attributed to pre combination service, is recognized as purchase consideration. The fair value, after adjustment for estimated forfeiture, attributed to post combination service is recognized as an expense over the remaining vesting period and is included as a component of total stock-based compensation expense. At September 27, 2010, there were approximately 179 shares, net of estimated forfeitures, in the employee share award grants. As of September 27, 2010, $946 of total unrecognized compensation cost related to these employee share award grants is expected to be recognized over a weighted-average period of 1.4 years.

(17) Segment Information

The operating segments reported below are the Companys segments for which separate financial information is available and upon which operating results are evaluated by the chief operating decision maker on a timely basis to assess performance and to allocate resources.

Prior to the Companys acquisition of the PCB Subsidiaries, the Company had two operating segments, PCB Manufacturing and Backplane Assembly, consistent with the nature of its operations. Due to the acquisition, the Company has reassessed its operating segments and concluded that it will analyze its worldwide operations based on two geographic operating segments: 1) North America, which consists of six domestic PCB fabrication plants, including a facility that provides follow-on value-added services primarily for one of the domestic PCB manufacturing plants, and the Companys Shanghai, China backplane assembly plant and its related Ireland sales support infrastructure, and 2) Asia Pacific, which consists of the newly acquired PCB Subsidiaries. Each segment operates predominantly in the same industry with production facilities that produce similar customized products for its customers and use similar means of product distribution in their respective geographic regions.

The Company evaluates segment performance based on operating segment income, which is operating income before amortization of intangibles. Interest expense and interest income are not presented by segment since they are not included in the measure of segment profitability reviewed by the chief operating decision maker. All inter-segment transactions have been eliminated.


	Quarter Ended						Three Quarters Ended
	September 27,			September 28,			September 27,			September 28,
	2010			2009			2010			2009
	(In thousands)
Net Sales:
North America	$	148,263		$	139,075		$	425,407		$	432,552
Asia Pacific		211,463						384,536

Total sales		359,726			139,075			809,943			432,552
Inter-segment sales		(1,913	)					(3,663	)

Total net sales	$	357,813		$	139,075		$	806,280		$	432,552

Operating Segment Income (Loss):
North America	$	17,147		$	(4,536	)	$	34,012		$	14,393
Asia Pacific		32,211						47,982

Total operating segment income		49,358			(4,536	)		81,994			14,393
Amortization of intangibles		(3,653	)		(860	)		(9,065	)		(2,580	)

Total operating income		45,705			(5,396	)		72,929			11,813
Total other expense		(4,121	)		(2,666	)		(13,140	)		(7,944	)

Income before income taxes	$	41,584		$	(8,062	)	$	59,789		$	3,869

TTM TECHNOLOGIES, INC.

Notes to Consolidated Financial Statements (Continued)


	September 27,		December 31,
	2010		2009
	(In thousands)
Segment Assets:
North America	$	394,998	$	543,058
Asia Pacific		1,300,955

Total assets	$	1,695,953	$	543,058

The Companys customers include both OEMs and EMS companies. The Companys OEM customers often direct a significant portion of their purchases through EMS companies. While the Companys customers include both OEM and EMS providers, the Company measures customer concentration based on OEM companies, as they are the ultimate end customers.

For the quarters and three quarters ended September 27, 2010 and September 28, 2009, no one customer accounted for 10% or more of net sales. Sales to the Companys 10 largest OEM customers for the quarters ended September 27, 2010 and September 28, 2009 were 42% and 57%, respectively. Sales to the Companys 10 largest OEM customers for the three quarters ended September 27, 2010 and September 28, 2009 were 41% and 56%, respectively. The loss of one or more major customers or a decline in sales to the Companys major customers would have a material adverse effect on the Companys financial condition and results of operations.

(18) Related Party Transactions

Long-term Equity Investment

The Company, through its acquisition of the PCB Subsidiaries, acquired a 10% equity interest in a private company, Aspocomp Oulu Oy (Oulu), which is located in Finland. The majority owner of this private company is Aspocomp Group Oyj (Aspocomp), a Helsinki Stock Exchange traded Finnish company, which is therefore a related party. Aspocomp is also the 20% minority shareholder in Meadville Aspocomp (BVI) Holdings Limited, a majority-owned subsidiary of the Company. The Company consolidates the financial results of this majority-owned Company.

The Company accounts for this 10% investment in Oulu using the cost method of accounting. Under the cost method of accounting, the investment is measured at cost subsequent to initial measurement, which for the Company was April 8, 2010, the acquisition date of the PCB Subsidiaries. The fair value assigned to this investment was $2,718, which was based on a market approach to estimate the enterprise value calculation and recorded as a component of non-current assets.

The equity investment is tested for impairment if there are impairment triggers. There was no impairment of the equity investment for the quarter and three quarters ended September 27, 2010.

Supply and Lease Arrangements

In December 2009, one of the Companys foreign subsidiaries (on behalf of itself and other foreign subsidiaries) entered into long-term supply arrangements to purchase laminate and prepregs from a related party (and its subsidiary) in which a significant shareholder of the Company holds an approximate 18% share. These arrangements commenced on January 1, 2010, and expire on December 31, 2012. The Companys foreign subsidiaries also purchase laminate and prepregs from Meadville. For the quarter and three quarters ended September 27, 2010, the Company purchased $33,329 and $60,190, respectively, of laminate and prepregs from these related parties. These supply arrangements contain terms and prices for laminate and prepregs comparable to those charged by and contracted with other third party suppliers.

Additionally, a foreign subsidiary of the Company also leases warehouse space from a related party controlled by a significant shareholder of the Company. Likewise, a related party leases employee housing space from a foreign subsidiary. For the quarter and three quarters ended September 27, 2010, the net income for these activities was $74 and $154, respectively.

At September 27, 2010, the Company had $51,610 in accounts payable due to and $65 in accounts receivable due from the related party, in the consolidated condensed balance sheet, for the supply and lease arrangements.

Item 2. Managements Discussion and Analysis of Financial Condition and Results of Operations

The following discussion of our financial condition and results of operations should be read in conjunction with our consolidated condensed financial statements and the related notes and the other financial information included in this Quarterly Report on Form 10-Q. This discussion and analysis contains forward-looking statements that involve risks and uncertainties. Our actual results may differ materially from those anticipated in these forward-looking statements as a result of specified factors, including those set forth in Item 1A Risk Factors of Part II below and elsewhere in this Quarterly Report on Form 10-Q.

This discussion and analysis should be read in conjunction with Managements Discussion and Analysis of Financial Condition and Results of Operations set forth in our annual report on Form 10-K for the year ended December 31, 2009, filed with the Securities and Exchange Commission.

Overview

We are a one-stop provider of time-critical and technologically complex printed circuit boards (PCBs) and backplane assemblies, which serve as the foundation of sophisticated electronic products. We serve high-end commercial and aerospace/defense markets including the networking/communications infrastructure, defense, high-end computing, and industrial/medical markets which are characterized by high levels of complexity and moderate production volumes. Our customers include original equipment manufacturers (OEMs), electronic manufacturing services (EMS) providers, and aerospace/defense companies. Our time-to-market and high technology focused manufacturing services enable our customers to reduce the time required to develop new products and bring them to market.

On the evening of April 8, 2010 (April 9, 2010 at approximately 9:00 a.m. Hong Kong time), the Company acquired from Meadville and MTG all of the issued and outstanding capital stock of the PCB Subsidiaries. The PCB Subsidiaries, through their respective subsidiaries, engage in the business of manufacturing and distributing PCBs, including circuit design, quick-turn-around services, and drilling and routing services. The PCB Subsidiaries are wholly owned subsidiaries of the Company and represent the Companys Asia Pacific operating segment.

We believe that the combination of our legacy business and the PCB Subsidiaries will increase our diversification and allow us to better address a number of industry trends and other operational challenges impacting us:

Ability to meet customer demand for one-stop manufacturing solution. As a result of the business combination, we are now a leading global PCB company with high-technology capabilities and a highly diversified revenue mix by geographic region and end market. In addition, we can now offer our customers a one-stop global solution from quick-turn through volume production and a focused facility specialization strategy.

Ability to continue expanding market presence and capitalizing on new opportunities. We can now capture additional business globally from both existing and new customers, particularly in North America and Europe.

Ability to respond to increasing global competition. We now can capitalize on potential economies of scale, cost savings and access to a highly trained PCB Subsidiaries workforce resulting from a global sales force and flexible manufacturing platform; complementary footprints, customers and end markets; and talented management teams with leading expertise in the Asian market.

We believe that these factors position us to compete effectively in our industry by allowing us to respond to technologically complex and time-sensitive customer demands and increasing competition from Asian manufacturers.

While our customers include both OEM and EMS providers, we measure customers based on OEM companies as they are the ultimate end customers. We measure customers as those companies that have placed orders of $2,000 or more in the preceding 12-month period. As of September 27, 2010, we had approximately 1,137 customers and approximately 843 as of September 28, 2009. Sales to our 10 largest OEM customers accounted for 42% and 57% of our net sales in the third quarter ended September 27, 2010 and September 28, 2009, respectively. Sales to our 10 largest OEM customers accounted for 41% and 56% of our net sales for the three quarters ended September 27, 2010 and September 28, 2009, respectively.

The following table shows the percentage of our net sales attributable to each of the principal end markets we served for the periods indicated.


	Quarter Ended						Three Quarters Ended
	September 27,			September 28,			September 27,			September 28,
End Markets(1)	2010			2009			2010			2009
Aerospace/Defense		17	%		44	%		22	%		45	%
Cellular Phone		11						9
Computing/Storage/Peripherals		21			12			21			11
Medical/Industrial/Instrumentation/Other		9			8			9			8
Networking/Communications		36			35			34			35
Other		6			1			5			1

Total		100	%		100	%		100	%		100	%


(1)		Sales to EMS companies are classified by the end markets of their OEM customers.

For PCBs, we measure the time sensitivity of our products by tracking the quick-turn percentage of our work. We define quick-turn orders as those with delivery times of 10 days or less, which typically captures research and development, prototype, and new product introduction work, in addition to unexpected short-term demand among our customers. Generally, we quote prices after we receive the design specifications and the time and volume requirements from our customers. Our quick-turn services command a premium price as compared to standard lead-time products.

We also deliver a significant percentage of compressed lead-time work with lead times of 11 to 20 days. We typically receive a premium price for this work as well. Purchase orders may be cancelled prior to shipment. We charge customers a fee, based on percentage completed, if an order is cancelled once it has entered production. We derive revenues primarily from the sale of PCBs and backplane assemblies using customer-supplied engineering and design plans. We recognize revenues when persuasive evidence of a sales arrangement exists, the sales terms are fixed and determinable, title and risk of loss have transferred, and collectibility is reasonably assured generally when products are shipped to the customer. Net sales consist of gross sales less an allowance for returns, which typically has been less than 2% of gross sales. We provide our customers a limited right of return for defective PCBs and backplane assemblies. We record an estimated amount for sales returns and allowances at the time of sale based on historical information.

Cost of goods sold consists of materials, labor, outside services, and overhead expenses incurred in the manufacture and testing of our products as well as stock-based compensation expense. Many factors affect our gross margin, including capacity utilization, product mix, production volume, and yield. We generally do not participate in any significant long-term contracts with suppliers, with the exception of the supply arrangement to purchase laminate and prepregs from a related party controlled by a significant shareholder, and we believe there are a number of potential suppliers for the raw materials we use.

Selling and marketing expenses consist primarily of salaries and commissions paid to our internal sales force and independent sales representatives, salaries paid to our sales support staff, stock-based compensation expense as well as costs associated with marketing materials and trade shows. We generally pay higher commissions to our independent sales representatives for quick-turn work, which generally has a higher gross profit component than standard lead-time work.

General and administrative costs primarily include the salaries for executive, finance, accounting, information technology, facilities and human resources personnel, as well as insurance expenses, expenses for accounting and legal assistance, incentive compensation expense, stock-based compensation expense, bad debt expense, gains or losses on the sale or disposal of property, plant and equipment, and acquisition related expenses.

CRITICAL ACCOUNTING POLICIES AND ESTIMATES

Our consolidated condensed financial statements included in this report have been prepared in accordance with accounting principles generally accepted in the United States of America. The preparation of these financial statements requires management to make estimates and assumptions that affect the reported amounts of assets, liabilities, net sales and expenses, and related disclosure of contingent assets and liabilities.

A critical accounting policy is defined as one that is both material to the presentation of our consolidated condensed financial statements and requires management to make difficult, subjective or complex judgments that could have a material effect on our financial condition or results of operations. These policies require us to make assumptions about matters that are highly uncertain at the time of the estimate. Different estimates we could reasonably have used, or changes in the estimates that are reasonably likely to occur, would have a material effect on our financial condition or results of operations.

Management bases its estimates on historical experience and on various other assumptions that are believed to be reasonable under the circumstances, the results of which form the basis for making judgments about the carrying values of assets and liabilities that are not readily apparent from other sources. Management has discussed the development, selection and disclosure of these estimates with the audit committee of our board of directors. Actual results may differ from these estimates under different assumptions or conditions.

Our critical accounting policies include asset valuation related to bad debts and inventory; sales returns and allowances; impairment of long-lived assets, including goodwill and intangible assets; derivative instruments and hedging activities; realizability of deferred tax assets; establishing the fair value of individual assets acquired, liabilities assumed, and noncontrolling interest when we acquire other businesses; and determining self-insured reserves, asset retirement obligations and environmental liabilities.

Allowance for Doubtful Accounts

We provide customary credit terms to our customers and generally do not require collateral. We perform ongoing credit evaluations of the financial condition of our customers and maintain an allowance for doubtful accounts based upon historical collections experience and expected collectibility of accounts. Our actual bad debts may differ from our estimates.

Inventories

In assessing the realization of inventories, we are required to make judgments as to future demand requirements and compare these with current and committed inventory levels. Provision is made to reduce excess and obsolete inventories to their estimated net realizable value thereby establishing a new cost basis. Our inventory requirements may change based on our projected customer demand, market conditions, technological and product life cycle changes, longer or shorter than expected usage periods, and other factors that could affect the valuation of our inventories. We maintain certain finished goods inventories near certain key customer locations in accordance with agreements with those customers. Although this inventory is typically supported by valid purchase orders, should these customers ultimately not purchase these inventories, our results of operations and financial condition would be adversely affected.

Revenue Recognition

We derive revenues primarily from the sale of printed circuit boards and backplane assemblies using customer-supplied engineering and design plans. We provide our customers a limited right of return for defective printed circuit boards and backplane assemblies. We accrue an estimated amount for sales returns and allowances at the time of sale based on historical information. To the extent actual experience varies from our historical experience, revisions to these allowances may be required.

Long-lived Assets

We have significant long-lived tangible and intangible assets consisting of property, plant and equipment, definite-lived intangibles, and goodwill. We review these assets for impairment whenever events or changes in circumstances indicate that the carrying amount of such assets may not be recoverable. In addition, we perform an impairment test related to goodwill at least annually. Our goodwill and intangibles are largely attributable to our acquisitions of other businesses. We have two operating segments, North America and Asia Pacific.

During the fourth quarter of each year, and when events and circumstances warrant an evaluation, we perform our annual impairment assessment of goodwill, which requires the use of a fair-value based analysis. We determine the fair value of our reporting units based on discounted cash flows and market approach analyses as considered necessary and consider factors such as a weakened economy, reduced expectations for future cash flows coupled with a decline in the market price of our stock and market capitalization for a sustained period as indicators for potential goodwill impairment. If the reporting units carrying amount exceeds its estimated fair

value, a second step must be performed to measure the amount of the goodwill impairment loss, if any. The second step compares the implied fair value of the reporting units goodwill, determined in the same manner as the amount of goodwill recognized in a business combination, with the carrying amount of such goodwill. If the carrying amount of the reporting units goodwill exceeds the implied fair value of that goodwill, an impairment loss is recognized in an amount equal to that excess.

We also assess other long-lived assets, specifically definite-lived intangibles and property, plant and equipment, for potential impairment given similar impairment indicators. When indicators of impairment exist related to our long-lived tangible assets and definite-lived intangible assets, we use an estimate of the undiscounted net cash flows in measuring whether the carrying amount of the assets is recoverable. Measurement of the amount of impairment, if any, is based upon the difference between the assets carrying value and estimated fair value. Fair value is determined through various valuation techniques, including market and income approaches as considered necessary.

If forecasts and assumptions used to support the realizability of our goodwill and other long-lived assets change in the future, significant impairment charges could result that would adversely affect our results of operations and financial condition.

Derivative Instruments and Hedging Activities

As a matter of policy, we use derivatives for risk management purposes, and we do not use derivatives for speculative purposes. Derivatives are typically entered into as hedges of changes in interest rates, currency exchange rates, and other risks.

When we determine to designate a derivative instrument as a cash flow hedge, we formally document the hedging relationship and its risk management objective and strategy for undertaking the hedge, the hedging instrument, the hedged item, the nature of the risk being hedged, how the hedging instruments effectiveness in offsetting the hedged risk will be assessed, and a description of the method of measuring ineffectiveness. We also formally assess, both at the hedges inception and on an ongoing basis, whether the derivative that is used in hedging transactions is highly effective in offsetting changes in cash flows of hedged items.

Derivative financial instruments are recognized as either assets or liabilities on the consolidated balance sheet with measurement at fair value. Fair value of the derivative instruments is determined using pricing models developed based on the underlying swap interest rate, foreign currency exchange rates, and other observable market data as appropriate. The values are also adjusted to reflect nonperformance risk of both the counterparty and the Company. For derivatives that are designated as a cash flow hedge, changes in the fair value of the derivative are recognized in accumulated other comprehensive income, to the extent the derivative is effective at offsetting the changes in cash flow being hedged until the hedged item affects earnings. To the extent there is any hedge ineffectiveness, changes in fair value relating to the ineffective portion are immediately recognized in earnings. Changes in the fair value of derivatives that are not designated as hedges are recorded in earnings each period.

Income Taxes

Deferred income tax assets are reviewed for recoverability, and valuation allowances are provided, when necessary, to reduce deferred income tax assets to the amounts that are more likely than not to be realized based on our estimate of future taxable income. Should our expectations of taxable income change in future periods, it may be necessary to establish a valuation allowance, which could affect our results of operations in the period such a determination is made. In addition, we record income tax provision or benefit during interim periods at a rate that is based on expected results for the full year. If future changes in market conditions cause actual results for the year to be more or less favorable than those expected, adjustments to the effective income tax rate could be required.

Business Combinations

We allocate the purchase price of acquired companies to the tangible and intangible assets acquired, liabilities assumed and noncontrolling interest, based on their estimated fair values. The excess of the purchase price over these fair values is recorded as goodwill. We engage independent third-party appraisal firms to assist us in determining the fair values of assets acquired, liabilities assumed, and noncontrolling interest. Such valuations require management to make significant estimates and assumptions, especially with respect to intangible assets. The significant purchased intangible assets recorded by us include customer relationships, trade name, and order backlog. The fair values assigned to the identified intangible assets are discussed in Note 2 to the consolidated condensed financial statements.

Critical estimates in valuing certain intangible assets include but are not limited to: future expected cash flows from customer relationships, estimating cash flows from existing backlog, market position of the trade name, as well as assumptions about cash flow savings from the trade name, and discount rates. Managements estimates of fair value are based upon assumptions believed to be reasonable, but which are inherently uncertain and unpredictable and, as a result, actual results may differ from estimates.

Estimates associated with the accounting for acquisitions may change during the measurement period as additional information becomes available regarding the assets acquired, liabilities assumed, and noncontrolling interest as discussed in Note 2 to the consolidated condensed financial statements.

Self Insurance

We are primarily self-insured for group health insurance and workers compensation benefits provided to our U.S. employees, and we purchase insurance to protect against annual claims at the individual and aggregate level. The insurance carrier adjudicates and processes employee claims and is paid a fee for these services. We reimburse our insurance carriers for paid claims subject to variable monthly limitations. We estimate our exposure for claims incurred but not reported at the end of each reporting period. We use our judgment using our historical claim data and information and analysis provided by actuarial and claim advisors, our insurance carriers and brokers on an annual basis to estimate our liability for these claims. This liability is subject to an individual insured stop-loss coverage that ranges from $175,000 to $250,000 per individual. Our actual claims experience may differ from our estimates.

Asset Retirement Obligations and Environmental Liabilities

We establish liabilities for the costs of asset retirement obligations when a legal or contractual obligation exists to dispose of or restore an asset upon its retirement and the timing and cost of such work can be reasonably estimated. The Company capitalizes the associated asset retirement costs as part of the carrying amount of the long-lived asset. The liability is initially measured at fair value and subsequently is adjusted for accretion expense and changes in the amount or timing of the estimated cash flows. In addition, we accrue an estimate of the costs of site closure environmental investigations and environmental remediation for work at identified sites where an assessment has indicated it is probable that cleanup costs are or will be required and may be reasonably estimated. In making these estimates, we consider information that is currently available, existing technology, enacted laws and regulations, and our estimates of the timing of the required remedial actions, and we discount these estimates at 8%. We also are required to estimate the amount of any probable recoveries, including insurance recoveries.

Results of Operations

Quarter and Three Quarters Ended September 27, 2010 Compared to the Quarter and Three Quarters Ended September 28, 2009

The third quarter and the three quarters ended September 28, 2009 do not include the results of operations from our acquired PCB Subsidiaries, as the acquisition occurred on April 8, 2010. The acquisition has had and will continue to have a significant effect on our operations as discussed in the various comparisons noted below.

There were 91 days in each of the third quarters ended September 27, 2010 and September 28, 2009 and 270 and 271 days in the three quarters ended September 27, 2010 and September 28, 2009, respectively. Included in the consolidated statement of operations for both the quarter and three quarters ended September 27, 2010 are 91 and 172 days, respectively, of results of operations for the Asia Pacific operations for the period from April 9, 2010 through September 27, 2010.

The following table sets forth statement of operations data expressed as a percentage of net sales for the periods indicated:


	Quarters Ended						Three Quarters Ended
	September 27,			September 28,			September 27,			September 28,
	2010			2009			2010			2009
Net sales		100.0	%		100.0	%		100.0	%		100.0	%
Cost of goods sold		77.5			82.6			79.6			82.5

Gross profit		22.5			17.4			20.4			17.5

Operating expenses:
Selling and marketing		2.5			4.7			3.1			4.6
General and administrative		6.1			6.8			7.0			5.9
Amortization of definite-lived intangibles		1.1			0.6			1.1			0.6
Restructuring charges					1.8			0.1			1.2
Impairment of long-lived assets					7.4			0.1			2.5

Total operating expenses		9.7			21.3			11.4			14.8

Operating income (loss)		12.8			(3.9	)		9.0			2.7
Other income (expense):
Interest expense		(1.9	)		(2.1	)		(2.0	)		(1.9	)
Interest income					0.1			0.1			0.1
Other, net		0.7			0.1			0.3

Total other expense, net		(1.2	)		(1.9	)		(1.6	)		(1.8	)

Income (loss) before income taxes		11.6			(5.8	)		7.4			0.9
Income tax (provision) benefit		2.6			2.3			2.0			(0.3	)

Net income (loss)		9.0			(3.5	)		5.4			0.6
Net income attributable to the noncontrolling interest		(0.9	)					(0.6	)

Net income (loss) attributable to TTM Technologies, Inc, stockholders		8.1	%		(3.5	)%		4.8	%		0.6	%

Prior to our acquisition of the PCB Subsidiaries, we had two operating segments, PCB Manufacturing and Backplane Assembly, consistent with the nature of our operations. Due to the acquisition, we have reassessed our operating segments and concluded that we will analyze our worldwide operations based on two geographic operating segments: 1) North America, which consists of six domestic PCB fabrication plants, including a facility that provides follow-on value-added services primarily for one of the PCB manufacturing plants, and one backplane assembly plant in Shanghai, China, which is managed in conjunction with the U.S. operations, and its related Ireland sales support infrastructure; and 2) Asia Pacific, which consists of the newly acquired PCB Subsidiaries. Each segment operates predominantly in the same industry with production facilities that produce similar customized products for our customers and use similar means of product distribution in their respective geographic regions.

The following table compares net sales by reportable segment for the quarters and three quarters ended September 27, 2010 and September 28, 2009:


	Quarter Ended					Three Quarters Ended
	September 27,			September 28,		September 27,			September 28,
	2010			2009		2010			2009
	(In thousands)
Net Sales:
North America	$	148,263		$	139,075	$	425,407		$	432,552
Asia Pacific		211,463					384,536

Total sales		359,726			139,075		809,943			432,552
Inter-segment sales		(1,913	)				(3,663	)

Total net sales	$	357,813		$	139,075	$	806,280		$	432,552

Net Sales

Net sales increased $218.7 million, from $139.1 million in the third quarter of 2009 to $357.8 million in the third quarter of 2010 and $373.7 million from $432.6 million for the three quarters ended 2009 to $806.3 million for the three quarters ended 2010 primarily due to our acquisition of the PCB Subsidiaries, which comprise our Asia Pacific reporting segment.

Revenue for the North America segment increased $9.2 million, or 6.6%, from $139.1 million in the third quarter 2009 to $148.3 million in the third quarter of 2010 primarily due to increased sales volume at a number of our facilities due to the improving economy and the transfer of work from our closed facilities, partially offset by lost revenue resulting from the closure of our Los Angeles, California facility in November 2009, and our Hayward, California facility in March 2010. The revenue increase reflects an unchanged average PCB selling price from the third quarter of 2009 and an increase in PCB volume of 12% during the same period due to the improving economy.

Revenue for the North America segment decreased $7.2 million, or 1.7%, from $432.6 million in the first three quarters of 2009 to $425.4 million in the first three quarters of 2010 primarily due to lower volume of backplane assemblies partially offset by higher PCB manufacturing revenue. PCB revenue reflects an increase in PCB volume of 7% during the first three quarters of 2010 due to the improving economy. Partially offsetting this increase in volume was a 4% decrease in PCB selling price during the same period due largely to a shift in production mix.

Cost of Goods Sold

Cost of goods sold increased $162.6 million from $114.9 million in the third quarter of 2009 to $277.5 million in the third quarter of 2010 and $284.9 million from $357.0 million for the first three quarters of 2009 to $641.9 million for the first three quarters of 2010 primarily due to our acquisition of the PCB Subsidiaries, which comprise our Asia Pacific reporting segment.

Cost of goods sold for the North America segment increased $1.6 million, or 1.4%, from $114.9 million for the third quarter of 2009 to $116.5 million for the third quarter of 2010 due primarily to increased production volume partially offset by reduced overhead from the facility closures discussed above, as well as lower direct material costs due to lower volumes of backplane assemblies, which inherently have a higher material content. As a percentage of net sales, cost of goods sold decreased from 82.6% for the third quarter of 2009 to 78.6% for the third quarter of 2010, primarily due to cost savings from our closed facilities and increased absorption of fixed costs across a smaller plant footprint following the closure of our Los Angeles and Hayward, California facilities.

Cost of goods sold for the North America segment decreased $18.0 million, or 5.0%, from $357.0 million for the first three quarters of 2009 to $339.0 million for the first three quarters of 2010 due primarily to lower demand for backplane assemblies. Additionally, lower labor and direct material expenses due to the facility closures discussed above, partially offset by higher costs at our remaining facilities due to increased PCB production contributed to the decrease in our cost of goods sold. As a percentage of net sales, cost of goods sold decreased from 82.5% for the three quarters of 2009 to 79.7% for the first three quarters of 2010, primarily due to cost savings from our closed facilities and increased absorption of fixed costs across a smaller plant footprint following the closure of our Redmond, Washington, and Los Angeles and Hayward, California facilities.

Cost of goods sold for the Asia Pacific segment for the first three quarters of 2010 were higher than expected due to the fair value mark up of the acquired PCB Subsidiaries inventory of approximately $6.7 million. There were no such fair value changes in the third quarter ended 2010, and we do not expect any further purchase price adjustments related to inventory in the future.

Gross Profit

As a result of the foregoing, gross profit increased $56.1 million from $24.2 million for the third quarter of 2009 to $80.3 million for the third quarter of 2010 and $88.9 million from $75.5 million for the first three quarters of 2009 to $164.4 million for the three quarters of 2010. The increase in our gross profit was due primarily to our acquisition of the PCB Subsidiaries.

Gross margin increased from 17.4% in the third quarter of 2009 to 22.5% in the third quarter of 2010 due to higher overall profit margins for the Asia Pacific segment and higher fixed cost absorption on higher volumes in our North America segment as well as cost savings from our closed facilities. Gross margin increased from 17.5% for the first three quarters of 2009 to 20.4% for the first three quarters of 2010 due to cost savings from our closed facilities and higher fixed cost absorption on higher volumes in our North America segment and higher overall profit margins for the Asia Pacific segment, partially offset by $6.7 million of increased costs in the Asia Pacific segment due to the fair value mark up of acquired PCB Subsidiaries inventory.

Gross profit increased $7.5 million, or 31.0%, from $24.2 million for the third quarter of 2009 to $31.7 million for the third quarter of 2010 for the North America segment due primarily to higher revenue as described above. Gross margin increased from 17.4% in the third quarter of 2009 to 21.4% in the third quarter of 2010 due to cost savings from our closed facilities and higher fixed cost absorption on higher volumes.

Gross profit increased $10.9 million, or 14.4%, from $75.5 million for the first three quarters of 2009 to $86.4 million for the first three quarters of 2010 for the North America segment due to lower cost of goods sold as described above. Gross margin increased from 17.5% for the first three quarters of 2009 to 20.3% for the first three quarters of 2010 due to cost savings from our closed facilities and higher fixed cost absorption on higher volumes.

Selling and Marketing Expenses

Selling and marketing expenses increased $2.6 million, or 40.0%, from $6.5 million for the third quarter of 2009 to $9.1 million for the third quarter of 2010 due to our acquisition of the PCB Subsidiaries. As a percentage of net sales, selling and marketing expenses were 4.7% in the third quarter of 2009 as compared to 2.5% in the third quarter of 2010. Additionally, selling and marketing expenses increased $4.9 million, or 24.5%, from $20.0 million for the first three quarters of 2009 to $24.9 million for the first three quarters of 2010 due to our acquisition of the PCB Subsidiaries. As a percentage of net sales, selling and marketing expenses were 4.6% in the first three quarters of 2009 as compared to 3.1% in the first three quarters of 2010. The decline in selling and marketing expense as a percentage of net sales is due to our acquisition of the PCB Subsidiaries, which have lower selling labor and commission expense than our North America reporting segment.

General and Administrative Expenses

General and administrative expenses increased $12.5 million from $9.4 million, or 6.8% of net sales, for the third quarter of 2009 to $21.9 million, or 6.1% of net sales, for the third quarter of 2010. Additionally, general and administrative expenses increased $30.8 million from $25.5 million, or 5.9% of net sales, for the first three quarters ended September 28, 2009 to $56.3 million, or 7.0% of net sales, for the first three quarters ended September 27, 2010. The increase in expense primarily relates to our acquisition of the PCB Subsidiaries for the quarter and three quarters ended September 27, 2010, as well as an increase in transaction related costs of $7.8 million from $1.4 million for the first three quarters ended September 28, 2009 to $9.2 million for the first three quarters ended September 27, 2010.

Amortization of Definite-Lived Intangibles

Intangible amortization expense increased $2.8 million from $0.9 million, or 0.6% of net sales, for the third quarter of 2009 to $3.7 million, or 1.1% of net sales, for the third quarter of 2010. This expense increased $6.5 million from $2.6 million, or 0.6% of net sales, for the first three quarters of 2009 to $9.1 million, or 1.1% of net sales, for the first three quarters of 2010. The increase in both periods was due to our acquisition of the PCB Subsidiaries. Acquired identifiable intangible assets include customer relationships, trade name and order backlog.

Restructuring Charges

Restructuring charges recorded for the first three quarters of 2010 are related to contract termination costs related to building operating leases associated with the closure of our Hayward, California facility, which the Company ceased use. For the third quarter of 2009 and first three quarters of 2009, the restructuring charges recorded related mainly to the closure of the Hayward and Los Angeles, California facilities and other Company-wide employee reduction actions during 2009.

Impairment of Long-lived Assets

Impairment of long-lived assets of $0.8 million for the first three quarters of 2010 relates to the further reduction in the value of the Dallas, Oregon facility to record the estimated fair value less cost to sell given current market conditions. We sold this facility in July 2010. Impairment of long-lived assets of $10.3 million and $10.6 million for the third quarter of 2009 and for the first three quarters of 2009, respectively, was related to the impairment of certain long-lived assets, including assets held for sale, for our Redmond, Washington; Dallas, Oregon; and Hayward and Los Angeles, California facilities.

Other Expense

Other expense increased $1.4 million from $2.7 million for the third quarter of 2009 to $4.1 million for the third quarter of 2010. Other expense increased $5.2 million from $7.9 million for the first three quarters of 2009 to $13.1 million for the first three quarters of 2010. The increase in other expense primarily relates to interest expense related to the debt assumed at the date of acquisition of the PCB Subsidiaries, as well as increased amortization of costs related to the issuance of this debt. For the quarter and three quarters of 2010, the increase in interest expense is partially offset by foreign currency transaction gains.

Income Tax Provision

The provision for income taxes increased $12.6 million from a benefit of $3.2 million for the third quarter of 2009 to a provision of $9.4 million for the third quarter of 2010 primarily due to higher pre-tax income. Our effective tax rate was 22.7% in the third quarter of 2010 and (39.4)% in the third quarter of 2009. The provision for income taxes increased $15.0 million from $1.4 million for the first three quarters of 2009 to $16.4 million for the first three quarters of 2010 primarily due to higher pre-tax income. Our effective tax rate was 27.5% in the first three quarters of 2010 and 35.6% in the first three quarters of 2009. Our effective tax rate decreased in 2010 primarily due to the acquisition of the PCB Subsidiaries, which have a lower effective tax rate than our North America operations, offset by the impact of the non-deductibility of certain transaction costs. Additionally, certain foreign losses generated are not more than likely to be realizable, and thus no income tax benefit has been recognized on these losses. Our effective tax rate is primarily impacted by the U.S. federal income tax rate, apportioned state income tax rates, tax rates in China and Hong Kong, generation of other credits and deductions available to us, and certain non-deductible items.

Net Income Attributable to the Noncontrolling Interests

Net income attributable to noncontrolling interests was $3.1 million and $4.9 million for the quarter and three quarters ended September 27, 2010, respectively. This income relates to two majority-owned companies in China included in the PCB Subsidiaries acquisition.

Liquidity and Capital Resources

General

Our principal sources of liquidity have been cash provided by operations, the issuance of Convertible Notes and, more recently, the issuance of term and revolving debt. Our principal uses of cash have been to meet debt service requirements, finance capital expenditures, fund working capital requirements and finance acquisitions. We anticipate that servicing debt, funding working capital requirements and financing capital expenditures will continue to be the principal demands on our cash in the future.

As of September 27, 2010, we had net working capital, including restricted cash, of approximately $228.1 million, compared to $323.1 million as of December 31, 2009.

Our annual 2010 capital expenditure plan is expected to total approximately $80 million (of which approximately $65 million relates to our Asia Pacific segment) and will fund capital equipment purchases to meet evolving customer needs, expand our technological capabilities throughout our facilities and replace aging equipment.

The following table provides information on contractual obligations as of September 27, 2010:


			Less Than						After
Contractual Obligations(1)(2)	Total		1 Year		1 - 3 Years		4 - 5 Years		5 Years
	(In thousands)
Long-term debt obligations	$	380,174	$	66,944	$	225,730	$	87,500	$
Convertible debt obligations		175,000						175,000
Interest on debt obligations		46,555		13,896		20,981		11,678
Interest rate swap liabilities		6,823		2,446		4,377
Foreign currency forward contract liabilities		3		3
Equipment payables		70,176		61,249		8,927
Purchase obligations		2,927		2,927
Operating lease commitments		4,289		1,679		1,105		451		1,054

Total contractual obligations	$	685,947	$	149,144	$	261,120	$	274,629	$	1,054


(1)		Unrecognized uncertain tax benefits of $0.1 million are not included in the table above as we are not sure when the amount will be paid.

(2)		Environmental liabilities of $0.8 million, not included in the table above, are accrued and recorded as liabilities in the consolidated balance sheet.

We are involved in various stages of investigation and cleanup related to environmental remediation at various production sites. We currently estimate that we will incur total remediation costs of $0.8 million over the next 12 to 84 months related to three Connecticut production sites.

For our Connecticut production sites, we are involved in various stages of investigation and cleanup related to environmental remediation matters for two of the sites and have investigated a third site, where no contamination above applicable standards was found. Further, we are investigating and remediating former production sites in Washington and California We currently estimate that we will incur remediation costs of $0.8 million to $1.3 million for these sites. In addition, we have obligations to the Connecticut DEP to make certain environmental asset improvements to the waste water treatment systems in two Connecticut plants. These costs are estimated to be $0.1 million and have been considered in our capital expenditure plan for 2010.

Based on our current level of operations, we believe that cash generated from operations, available cash and the proceeds from the issuance of Convertible Notes and Term and Revolving Loan; will be adequate to meet our currently anticipated debt service, capital expenditure, and working capital needs for the next 12 months and beyond. Our principal liquidity needs for periods beyond the next 12 months are to meet debt service requirements as well as for other contractual obligations as indicated in our contractual obligations table above and for capital purchases under our annual capital expenditure plan.

Cash Flows

Net cash provided by operating activities was $36.6 million for the first three quarters of 2010, compared to $57.3 million for the first three quarters of 2009. Our 2010 operating cash flow of $36.6 million primarily reflects net income of $43.4 million, $46.2 million of depreciation and amortization, $4.7 million of stock-based compensation, a net increase in deferred income taxes of $6.8 million, and other items totaling $1.8 million, partially offset by a net decrease in working capital of $66.3 million primarily reflecting an increase in accounts receivable.

Net cash provided by investing activities was $72.0 million for the first three quarters of 2010, compared to cash used of $6.8 million for the first three quarters of 2009. Net cash provided by investing activities in 2010 consisted of proceeds from the release of restricted cash to cash and cash equivalents of $120.0 million, proceeds from the sale of property, plant and equipment and assets held for sale of $4.3 million, and $1.4 million from the redemption of short-term investments, somewhat offset by $28.5 million for the PCB Subsidiaries acquisition and purchases of property, plant and equipment of $25.2 million.

Net cash used by financing activities was $37.4 million for the first three quarters of 2010 and consisted primarily of $38.0 million of net repayments of borrowings on the revolving loan.

Credit Agreement

The Credit Agreement consists of a $350.0 million senior secured Term Loan, a $87.5 million senior secured Revolving Loan, a $65.0 million Factoring Facility, and a $80.0 million Letters of Credit Facility, all of which mature on November 16, 2013. The Credit Agreement is secured by substantially all of the assets of the PCB Subsidiaries. The Company has fully and unconditionally guaranteed the Credit Agreement for full and prompt payment when due of all present and future payment obligations.

We are required to make scheduled payments of the outstanding Term Loan balance beginning in 2011 under the Credit Agreement. All and any other outstanding balances under the Credit Agreement are due at the maturity date of November 16, 2013. Borrowings under the Credit Agreement are subject to certain financial and operating covenants that include, among other provisions, limitations on dividends or other distributions, in addition to maintaining maximum total leverage ratios and minimum net worth, current assets, and interest coverage ratios at both the Company and PCB Subsidiaries level. On August 3, 2010, we entered into a waiver and amendment letter with Hong Kong and Shanghai Banking Corporation Limited, as Facility Agent for and on behalf of the other lenders named in the Credit Agreement, as amended March 30, 2010, which amended certain financial covenants applicable to us. Pursuant to the waiver and amendment letter, the lenders under the Credit Agreement agreed to amend the financial covenants related to consolidated tangible net worth, gearing ratio (the ratio of consolidated net borrowings to consolidated tangible net worth), and leverage. At September 27, 2010, we were in compliance with the amended covenants.

We are also required to pay a commitment fee of 0.20% per annum on any unused portion of loan or facility under the Credit Agreement. As of September 27, 2010, all of the Term Loan was outstanding and none of the Revolving Loan or the Factoring Facility were outstanding, and $62.7 million of the Letters of Credit Facility was outstanding. Available borrowing capacity under the Revolving Loan and Factoring Facility was $87.5 million and $65.0 million, respectively, at September 27, 2010.

Bank Loans

Bank loans are made up of bank lines of credit in mainland China and are used for working capital and capital investment for our mainland China facilities acquired in conjunction with the acquisition of the PCB Subsidiaries. These facilities are denominated in either U.S. Dollars or Chinese Renminbi (RMB), with interest rates tied to either the LIBOR or Peoples Bank of China rates with a small margin adjustment. These bank loans expire at various dates through May 2012.

Convertible Notes

In May 2008, we issued our Convertible Notes in a public offering with an aggregate principal amount of $175.0 million. The Convertible Notes bear interest at a rate of 3.25% per annum. Interest is payable semiannually in arrears on May 15 and November 15 of each year, beginning November 15, 2008. The Convertible Notes are senior unsecured obligations and will rank equally to our future unsecured senior indebtedness and senior in right of payment to any of our future subordinated indebtedness and are accounted for by separately accounting for the liability and equity components of the convertible debt. At September 27, 2010 the remaining amortization period for the unamortized Convertible Note discount in the amount of $31.1 million and debt issuance costs of $3.1 million was 4.6 years. The amortization of the Convertible Notes debt discount and unamortized debt issuance costs are based on an effective interest rate of 8.37%.

At any time prior to November 15, 2014, holders may convert their Convertible Notes into cash and, if applicable, into shares of our common stock based on a conversion rate of 62.6449 shares of our common stock per $1,000 principal amount of Convertible Notes, subject to adjustment, under the following circumstances: (1) during any calendar quarter beginning after June 30, 2008 (and only during such calendar quarter), if the last reported sale price of our common stock for at least 20 trading days during the 30 consecutive trading days ending on the last trading day of the immediately preceding calendar quarter is greater than or equal to 130% of the applicable conversion price on each applicable trading day of such preceding calendar quarter; (2) during the five business day period after any 10 consecutive trading day period in which the trading price per note for each day of that 10 consecutive trading day period was less than 98% of the product of the last reported sale price of our common stock and the conversion rate on such day; or (3) upon the occurrence of specified corporate transactions described in the prospectus supplement related to the Convertible Notes, which can be found on the SECs website at www.sec.gov. As of September 27, 2010, none of the conversion criteria had been met.

On or after November 15, 2014 until the close of business on the third scheduled trading day preceding the maturity date, holders may convert their notes at any time, regardless of the foregoing circumstances. Upon conversion, for each $1,000 principal amount of notes, we will pay cash for the lesser of the conversion value or $1,000 and shares of our common stock, if any, based on a daily conversion value calculated on a proportionate basis for each day of the 60 trading day observation period. Additionally, in the event of a fundamental change as defined in the prospectus supplement, or other conversion rate adjustments such as share splits or combinations, other distributions of shares, cash or other assets to stockholders, including self-tender transactions (Other Conversion Rate Adjustments), the conversion rate may be modified to adjust the number of shares per $1,000 principal amount of the notes. As of September 27, 2010, none of the criteria for a fundamental change or a conversion rate adjustment had been met.

The maximum number of shares issuable upon conversion, including the effect of a fundamental change and subject to Other Conversion Rate Adjustments, would be approximately 14.0 million shares.

We are not permitted to redeem the notes at any time prior to maturity. In the event of a fundamental change or certain default events, as defined in the prospectus supplement, holders may require us to repurchase for cash all or a portion of their notes at a price equal to 100% of the principal amount, plus any accrued and unpaid interest.

In connection with the issuance of the Convertible Notes, we entered into a convertible note hedge and warrant transaction (Call Spread Transaction) with respect to our common stock. The convertible note hedge, which cost an aggregate of $38.3 million and was recorded, net of tax, as a reduction of additional paid-in capital, consists of our option to purchase up to 11.0 million shares of common stock at a price of $15.96 per share. This option expires on May 15, 2015 and can only be executed upon the conversion of the Convertible Notes. Additionally, we sold warrants for the option to purchase 11.0 million shares of our common stock at a price of $18.15 per share. The warrants expire on August 17, 2015. The proceeds from the sale of warrants of $26.2 million was recorded as an addition to additional paid-in capital. The Call Spread Transaction has no effect on the terms of the Convertible Notes and reduces potential dilution by effectively increasing the conversion price of the Convertible Notes to $18.15 per share of our common stock.

Letters of Credit

The Company maintains several letters of credit: a $1.5 million standby letter of credit expiring December 31, 2010 associated with its insured workers compensation program, a $1.0 million standby letter of credit expiring February 28, 2011 related to the lease of one of its production facilities, and various other letters of credits aggregating to approximately $0.7 million maintained by our foreign subsidiaries related to purchases of machinery and equipment with various expiration dates through June 2011.

Off Balance Sheet Arrangements

We do not currently have any material relationships with unconsolidated entities or financial partnerships, such as entities often referred to as structured finance or special purpose entities, which would have been established for the purpose of facilitating off-balance sheet arrangements or other contractually narrow or limited purposes. In addition, we do not engage in trading activities involving non-exchange traded contracts. As a result, we are not materially exposed to any financing, liquidity, market, or credit risk that could arise if we had engaged in these relationships.

Seasonality

As a result of the product and customer mix of our Asia Pacific operating segment, a portion of our revenue will be subject to seasonal fluctuations going forward. This is primarily due to seasonal patterns in the computer and cellular phone industry, which together have become a significant portion of the end markets that we serve. This seasonality typically results in higher net sales in the third quarter due to end customer demand for fourth quarter sales of consumer electronics products.

Recently Issued Accounting Pronouncements

In January 2010, the FASB issued ASU 2010-06, Fair Value Measurements and Disclosures (Topic 820): Improving Disclosures about Fair Value Measurements, which will require companies to make new disclosures about recurring or nonrecurring fair value measurements including significant transfers into and out of Level 1 and Level 2 fair value hierarchies and information on purchases, sales, issuance and settlements on a gross basis in the reconciliation of Level 3 fair value measurements. The ASU is effective prospectively for financial statements issued for fiscal years and interim periods beginning after December 15, 2009. The new disclosures about purchases, sales, issuance and settlements on a gross basis in the reconciliation of Level 3 fair value measurements is effective for interim and annual reporting periods beginning after December 15, 2010. The adoption of ASU 2010-06 did not and is not expected to have a material impact on our consolidated condensed financial statements.

Item 3. Quantitative and Qualitative Disclosures about Market Risk

In the normal course of business operations we are exposed to risks associated with fluctuations in interest rates and foreign currency exchange rates. We address these risks through controlled risk management that includes the use of derivative financial instruments to economically hedge or reduce these exposures. We do not enter into derivative financial instruments for trading or speculative purposes.

We have not experienced any losses to date on any derivative financial instruments due to counterparty credit risk.

To ensure the adequacy and effectiveness of our interest rate and foreign exchange hedge positions, we continually monitor our interest rate swap positions and foreign exchange forward positions both on a stand-alone basis and in conjunction with their underlying interest rate and foreign currency exposures, from an accounting and economic perspective. However, given the inherent limitations of forecasting and the anticipatory nature of the exposures intended to be hedged, we cannot assure that such programs will offset more than a portion of the adverse financial impact resulting from unfavorable movements in either interest or foreign exchange rates. In addition, the timing of the accounting for recognition of gains and losses related to mark-to-market instruments for any given period may not coincide with the timing of gains and losses related to the underlying economic exposures and, therefore, may adversely affect our consolidated operating results and financial position.

Interest rate risk

Our interest expense is more sensitive to fluctuations in the general level of LIBOR and the Peoples Bank of China interest rates than to changes in rates in other markets. Our business is exposed to interest rate risk resulting from fluctuations in interest rates. Increases in interest rates would increase interest expenses relating to the outstanding variable rate borrowings of certain foreign subsidiaries and increase the cost of debt. Fluctuations in interest rates can also lead to significant fluctuations in the fair value of the debt obligations.

On April 9, 2010, we entered into a two-year pay-fixed, receive floating (1-month LIBOR), amortizing interest rate swap arrangement with an initial notional amount of $146.5 million, for the period beginning April 18, 2011 and ending on April 16, 2013. The interest rate swap will apply a fixed interest rate against the first interest payments of a portion of the $350.0 million Term Loan for this period. The notional amount of the interest rate swap decreases to zero over its term, consistent with our risk management objectives. The notional value underlying the hedge at September 27, 2010 was $146.5 million. Under the terms of the interest rate swap, the Company will pay a fixed rate of 2.50% and will receive floating 1-month LIBOR during the swap period.

To the extent the instruments are considered to be effective, changes in fair value are recorded as a component of accumulated other comprehensive income. To the extent there is any hedge ineffectiveness, changes in fair value relating to the ineffective portion are immediately recognized in earnings as interest expense. No ineffectiveness was recognized for the quarter ended September 27, 2010. At inception, the fair value of the interest rate swap was zero. As of September 27, 2010, the fair value of the swap was recorded as a liability of $3.7 million in other long-term liabilities. The change in the fair value of the interest rate swap is recorded as a component of accumulated other comprehensive income, net of tax, in our consolidated condensed balance sheet. There was no impact to interest expense for the quarter ending September 27, 2010 as the interest rate swap does not hedge interest rate cash flows until the period beginning April 18, 2011. We have designated this interest rate swap as a cash flow hedge.

We also, through our acquisition of the PCB Subsidiaries, assumed a long term pay-fixed, receive floating (1-month LIBOR), amortizing interest rate swap arrangement with an initial notional amount of $40.0 million, for the period beginning October 8, 2008 and ending on July 30, 2012. The notional amount of the interest rate swap amortizes to zero over its term, consistent with our risk management objectives. The notional value underlying the hedge at September 27, 2010 was $40.0 million. Under the terms of the interest rate swap, we will pay a fixed rate of 3.43% and will receive floating 1-month LIBOR during the swap period. As the borrowings attributable to this interest rate swap were paid off upon acquisition, we did not designate this interest rate swap as a cash flow hedge. As of September 27, 2010, the fair value of the swap was recorded as a liability of $1.6 million in other long-term liabilities. The change in fair value of this interest rate swap is recorded as other, net in the consolidated condensed statement of operations.

Foreign currency risks

We are subject to risks associated with transactions that are denominated in currencies other than our functional currencies, as well as the effects of translating amounts denominated in a foreign currency to the U.S. Dollar as a normal part of the reporting process. Our Asia Pacific operations utilize the Chinese Renminbi or RMB, and the Hong Kong Dollar or HKD, as the functional currency, which results in the Company recording a translation adjustment that is included as a component of accumulated other comprehensive income. The Company does not generally engage in hedging to manage foreign currency risk related to its revenue and expenses denominated in RMB and HKD.

We enter into foreign currency forward contracts to mitigate the impact of changes in foreign currency exchange rates and to reduce the volatility of purchases and other obligations generated in currencies other than the functional currencies. Our foreign subsidiaries may at times purchase forward exchange contracts to manage their foreign currency risk in relation to particular purchases or obligations, such as the related party financing obligation arising from the put call option to purchase the remaining 20% of a majority owned subsidiary in 2013, and certain purchases of machinery denominated in foreign currencies other than our foreign functional currency. The notional amount of the foreign exchange contracts at September 27, 2010 was approximately $30.1 million. We did not have any foreign exchange contracts as of December 31, 2009. We have designated certain of these foreign exchange contracts as cash flow hedges, with the exception of the foreign exchange contracts in relation to the related party financing obligation. In this instance, the hedged item is a recognized liability subject to foreign currency transaction gains and losses and therefore, changes in the hedged item due to foreign currency exchange rates are already recorded in earnings. Therefore, hedge accounting has not been applied.

The table below presents information about certain of the foreign currency forward contracts at September 27, 2010:


	As of September 27, 2010
			Average Contract
	Notional		Rate or Strike
	Amount		Amount
	(In thousands in USD)
Receive foreign currency / pay USD
Euro	$	24,542		1.30
Japanese Yen		5,603		0.01

	$	30,145

Estimated Fair Value	$	1,301

Debt Instruments

The table below presents information about certain of our debt instruments (bank borrowing) as of September 27, 2010.


															Weighted
													Fair Market		Average
	2011		2012		2013		2014		Thereafter		Total		Value		Interest Rate
								(In thousands)
Variable Rate:
US$	$	56,500	$	117,000	$	192,500	$		$		$	366,000	$	358,171		2.22	%
RMB		10,444		3,730								14,174		14,174		5.06	%

Total Variable Rate		66,944		120,730		192,500						380,174		372,345

Fixed Rate:
US$										175,000		175,000		167,510		3.25	%

Total Fixed Rate										175,000		175,000		167,510

Total	$	66,944	$	120,730	$	192,500	$		$	175,000	$	555,174	$	539,855

Interest Rate Swap Contracts

The table below presents information regarding our interest rate swaps as of September 27, 2010.


	Remaining 2010			2011			2012			2013			Fair Market Value
Average interest payout rate		3.43	%		2.72	%		2.59	%		2.50	%
Interest payout amount		(350	)		(3,366	)		(3,155	)		(676	)
Average interest received rate		0.26	%		0.26	%		0.26	%		0.26	%
Interest received amount		26			315			313			69
Fair value loss at September 27, 2010														(5,237	)

Item 4. Controls and Procedures

Evaluation of Disclosure Controls and Procedures.

We maintain a system of disclosure controls and procedures for financial reporting to give reasonable assurance that information required to be disclosed in our reports submitted under the Securities Exchange Act of 1934 is recorded, processed, summarized and reported within the time periods specified in the rules and forms of the SEC. These controls and procedures also give reasonable assurance that information required to be disclosed in such reports is accumulated and communicated to management to allow timely decisions regarding required disclosures.

Our Chief Executive Officer (CEO) and Chief Financial Officer (CFO), together with management, conducted an evaluation of the effectiveness of our disclosure controls and procedures as of September 27, 2010, pursuant to Rules 13a-15(e) of the Exchange Act. Based on that evaluation, our CEO and CFO concluded that our disclosure controls and procedures (as defined in Rule 13a-15(e) of the Exchange Act) were effective such that information relating to the Company, including our consolidated subsidiaries, required to

be disclosed in our SEC reports, (i) is recorded, processed, summarized and reported within the time frames specified in SEC rules and forms, and (ii) is accumulated and communicated to company management, including our CEO and CFO, as appropriate to allow timely discussion regarding disclosure.

Changes in Internal Control over Financial Reporting.

There has been no change in our internal control over financial reporting that occurred during the quarter ended September 27, 2010 that has materially affected, or is reasonably likely to materially affect, our internal control over financial reporting.

The Companys management is reviewing and evaluating its internal control procedures and the design of those control procedures relating to the acquisition of the PCB Subsidiaries and evaluating when it will complete an evaluation and review of the PCB Subsidiaries internal control over financial reporting.

Inherent Limitations on Effectiveness of Controls

Our management, including our principal executive officer and chief financial officer, does not expect that our disclosure controls or our internal control over financial reporting will prevent or detect all errors and all fraud. A control system, no matter how well designed and operated, can provide only reasonable, not absolute, assurance that the control systems objectives will be met. The design of a control system must reflect the fact that there are resource constraints, and the benefits of controls must be considered relative to their costs. Further, because of the inherent limitations in all control systems, no evaluation of controls can provide absolute assurance that misstatements due to error or fraud will not occur or that all control issues and instances of fraud, if any, within the company have been detected. These inherent limitations include the realities that judgments in decision-making can be faulty and that breakdowns can occur because of simple error or mistake. Controls also can be circumvented by the individual acts of some persons, by collusion of two or more people, or by management override of the controls. The design of any system of controls is based in part on certain assumptions about the likelihood of future events, and there can be no assurance that any design will succeed in achieving its stated goals under all potential future conditions. Projections of any evaluation of controls effectiveness to future periods are subject to risks. Over time, controls may become inadequate because of changes in conditions or deterioration in the degree of compliance with policies or procedures.

PART II. OTHER INFORMATION

Item 1. Legal Proceedings

Prior to our acquisition of the PCB Subsidiaries of Meadville Holdings Ltd., two of the PCB Subsidiaries were involved in various legal and arbitration proceedings instituted in the Peoples Republic of China by a former customer. The proceedings related to quality claims about certain products supplied by the PCB Subsidiaries. In May 2010, the parties entered into a settlement agreement whereby the PCB Subsidiaries agreed to pay approximately $2.5 million as the final settlement and the former customer withdrew all the legal and arbitration proceedings against the PCB Subsidiaries after receipt of the settlement funds.

Prior to our acquisition of PCG in October 2006, PCG made legal commitments to the U.S. EPA and the State of Connecticut regarding settlement of enforcement actions against the PCG operations in Connecticut. On August 17, 2004, PCG was sentenced for Clean Water Act violations and was ordered to pay a $6.0 million fine and an additional $3.7 million to fund environmental projects designed to improve the environment for Connecticut residents. In September 2004, PCG agreed to a stipulated judgment with the Connecticut Attorney Generals office and the Connecticut Department of Environmental Protection (DEP) under which PCG paid a $2.0 million civil penalty and agreed to implement capital improvements of $2.4 million to reduce the volume of rinse water discharged from its manufacturing facilities in Connecticut. The obligations to the U.S. EPA were completed as of July 1, 2009. The Connecticut DEP obligation involves the installation of rinse water recycling systems at the Stafford, Connecticut facilities. As of September 27, 2010, one recycling system was completed and placed into operation, and approximately $0.1 million remains to be expended in the form of capital improvements to meet the second rinse water recycling system requirement which is expected to be completed by December 2010. We have assumed these legal commitments as part of our purchase of PCG. Failure to meet either commitment could result in further costly enforcement actions.

Item 1A. Risk Factors

An investment in our common stock involves a high degree of risk. You should carefully consider the factors described in Part I Item 1A. Risk Factors in our Annual Report on Form 10-K for the year ended December 31, 2009, in analyzing an investment in our common stock. If any of the risks in our Annual Report on Form 10-K occurs, our business, financial condition, and results of operations would likely suffer, the trading price of our common stock could fall, and you could lose all or part of the money you paid for our common stock.

In addition, the risk factors and uncertainties could cause our actual results to differ materially from those projected in our forward-looking statements, whether made in this report or the other documents we file with the SEC, or our annual or quarterly reports to stockholders, future press releases, or orally, whether in presentations, responses to questions, or otherwise.

Item 2. Unregistered Sales of Equity Securities and Use of Proceeds

Not Applicable.

Item 6. Exhibits


Exhibit
Number		Exhibits
31.1		CEO Certification Pursuant to Section 302 of the Sarbanes Oxley Act of 2002.

31.2		CFO Certification Pursuant to Section 302 of the Sarbanes Oxley Act of 2002.

32.1		CEO Certification Pursuant to Section 906 of the Sarbanes Oxley Act of 2002.

32.2		CFO Certification Pursuant to Section 906 of the Sarbanes Oxley Act of 2002.

SIGNATURES

Pursuant to the requirements of the Securities Exchange Act of 1934, the Registrant has duly caused this report to be signed on its behalf by the undersigned thereunto duly authorized.


	TTM Technologies, Inc.
	/s/ Kenton K. Alder
	Kenton K. Alder
Dated: November 8, 2010	President and Chief Executive Officer


	/s/ Steven W. Richards
	Steven W. Richards
Dated: November 8, 2010	Chief Financial Officer and Secretary

EXHIBIT INDEX


Exhibit
Number		Exhibits
31.1		CEO Certification Pursuant to Section 302 of the Sarbanes Oxley Act of 2002.

31.2		CFO Certification Pursuant to Section 302 of the Sarbanes Oxley Act of 2002.

32.1		CEO Certification Pursuant to Section 906 of the Sarbanes Oxley Act of 2002.

32.2		CFO Certification Pursuant to Section 906 of the Sarbanes Oxley Act of 2002.